Nema Slike na Suse 10.1

[ DArCo @ 13.09.2006. 07:59 ] @

Instalirao sam Windows XP i Suse linux .....naravno sve na posebnoj particiji i sve je instalirao bez problema medjutim kad je zavrsio instalaciju linuxa i kad je trebao da prikaze sliku nema nista......Znaci podize linux kako treba ali na monitoru samo pise "input signal is out of range"...Sad ja pretpostavljam da nesto sa drajverima za graficku njije kako treba ili za monitor ali posto prvi put instaliram linux ne znam sta treba da radim.....U toku instalacije tj. pri kraju kad je trebalo da se izabere tip monitora u podesavanjima i frekvencija rada nije bilo mog monitora pa sam pomislio da je zbog toga jer sam stavio neki po default-u medjutim posle sam promenio monitor i isto se desilo iako sam tacno podesio tip monitora osvezavanje rezoluciju i ostalo.......Znaci problem je u tome sto nema slike kad podigne linux vec u trenutku kad podize linux gasi se monitor..........Zna li neko sta je u pitanju i kako to da sredim.........Dzabe mi ovoliko mucenje oko instaliranja kad sad ne vidim nista :(.........Imam graficku nvidia geforce 7300 pa mozda oko nje nesto treba da se podesi........ne znam .......pomoc...molim vas ako neko zna.........

[ Backy @ 13.09.2006. 11:09 ] @

teško ćeš nešto uraditi pošto si početnik, jer treba da ediuješ xorg.conf koji se nalazi u /etc/X11

bitne su opcije VertRefresh i HorizSync, pa ako znaš koje vrednosti su ti u vindojsu stavi iste i ovde...

[ Vlade Maksimovic @ 13.09.2006. 13:50 ] @

Desava se to, ja sam imao takvih problema na faksu kada je SuSE stavljan na masine koje imaju integrisanu graficku karticu.
Kada ti izbaci "input signal is out of range" pritisni Ctrl+Alt+F1 uloguj se kao root i odradi sledece
cd /
vi /etc/X11/xorg.conf
pritisni taster "i" (na tastaturi bez navodnika)
idi strelicama do dela Section "Modes" i obrisi sve linije koje ti pocinju sa rezolucijom vecom od 1024x768
tako da ce ti ostati

Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 97.84 1024 1088 1200 1376 768 769 772 808
Modeline "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
Modeline "800x600" 73.98 800 848 936 1072 600 601 604 639
Modeline "800x600" 66.71 800 848 936 1072 600 601 604 635
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "640x480" 57.18 640 680 752 864 480 481 484 517
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
EndSection

Pritisni ESC
Ugasi editor vi sa komandom :wq i resetuj racunar.

[ DArCo @ 13.09.2006. 15:46 ] @

Hvala sto se trudite da pomognete.Evo usao sam u gde si mi rekao ali kad ukucam

cd / (enter)
vi /etc/x11/xorg.conf (enter)
pritisnem i na tastaturi (mada ne razumem sta si hteo reci sa "(na tastaturi bez navodnika)")
otvara mi prozor u kome nema nista osim nekih plavih crtica sa strane.......na dnu ekrana pise --INSERT-- sa desne strane u dnu par brojeva i kad spustam strelicamakursor nista se ne menja vec samo racunar pisti upozorenje kako ne moze da mrda.Jedino sto je moguce je da na tasteru ENTER brisem te crtice ali time nista nisam uraio jer ne mogu da vidim sta brisem ispod......Nadam se da razumes sta mi se desava.Laik sam mu ovome i ne znam gde gresim....Ako mozes postupno da mi pomognes bio bih zahvalan.........Da nije nesto lose instalirano(mozda sam trebao kod instaliranja da podesim nesto za grafiku) pa da imam taj section"Modes".Uopste ga ne vidim kad otvorim xorg.conf i stisnem i.......

[ niceness @ 13.09.2006. 15:58 ] @

Nije nista lose instalirano.
Trebao si da otvoris /etc/X11/xorg.conf (veliko X)

Isto tako ne moras da koristis vi ako ti nije jasno kako radi, probaj nano, joe ... (ako su instalirani).

[ DArCo @ 13.09.2006. 16:50 ] @

da u pitanju je bilo X11 ne x11..Sad mi se sve pjavilo ali i dalje ne mogu da menjam vrednosti.Jel ima neka posebna komanda posto na del i backspace nece da obrise nista..........

Inace pod Section "Modes" imam samo jednu rezoluciju i to 1024x768" znaci nijednu drugu........mislim da mi je problem pod Monitor ali kazem tamo ne mogu da menjam vrednosti jer nece da obrise nista .....Mislim da treba upravo ta Horizontalna i vertikalna podesavanja da promenim........pod vertikal mi stoji 50-90 a pod Horizontal 31-57 e sad ja ne znam tacno sta i kako da promenim tu.......Takodje prva opcija nesto displej mi je 352 294 tako nesto ne znam dal i to treba da se menja........

[ niceness @ 13.09.2006. 17:50 ] @

Citat:

pod vertikal mi stoji 50-90 a pod Horizontal 31-57 e sad ja ne znam tacno sta i kako da promenim tu

Nadji specifikacije monitora pa pogledaj do kojih vrednosti moze ili dok si u windowsu otvori osd monitora (onaj meni gde ga podesavas)
i pogledaj koje su vrednosti.

Sto se tice vim editora... Vlade ti je vec objasnio najosnovnije. Znaci, pritisnes "i" (malo slovo i), izmenis sta hoces, pritisnes "Esc"
i kucas :wq [Enter] (da bi izasao i sacuvao) ili :q! [Enter] (da bi izasao i odbacio sve promene).

Ako zelis da naucis osnovne komande pokreni vimtutor i prati tekst.

[ anrxc @ 13.09.2006. 18:34 ] @

Citat:

Vlade Maksimovic:
Ugasi editor vi sa komandom :wq i resetuj racunar.

Ti si ozbiljan?

Citat:

DArCo: Sad mi se sve pjavilo ali i dalje ne mogu da menjam vrednosti.Jel ima neka posebna komanda posto na del i backspace nece da obrise nista..........

U naredbenom modu, x da uklonis jedan znak, dd da uklonis kompletnu liniju.
http://slackbook.ns-linux.org/vi.html

[ djordje @ 13.09.2006. 18:55 ] @

Ili lakse, pokreni mc (midnight commander), selektuj odgovarajuci fajl, stisni F4 da bi ga editovao, F2 za sacuvavanje, F10 za izlaz i kraj

[ DArCo @ 13.09.2006. 19:51 ] @

ok hvala vam puno sve sam naucio i kako se pise i brise........Pomozite mi sad ako imate vremena, posto definitivno ne znam koje sad vrednosti da postavim, menjao sam sve zivo i posle svega kucao :wq ali nista nisam dobio i dalje input signal out of range........

Ovako imam GEFORCE 7300
Monitor je AG NEOVO F-417 TFT

Monitor u windowsu radi na 72 herca i 1280x1024.to je sve sto mogu naci u meniju jer monitor nije neki extra pa da ima jos opcija

u linuxu podesavanja izgledaju ovako:

Section "Monitor"

DisplaySize 345 259
HorizSync 31-57
Identifier "Monitor [0]"
Option "DMPS"
VendorName "Compaq" ------------> ovo sam postavio bezveze jer nema za moj monitor
VertRefresh 50-90
UseModes "modes[0]"
End Section

Section "Modes"

Indentifier "Modes[0]"
Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806

End Section

Sta i gde menjati da proradi linux vec jednom???????????

[ DArCo @ 13.09.2006. 20:17 ] @

Podaci o monitoru:

Panel Size 17" (432mm)
Brightness 300cd/m2 (Typical)
Contrast Ratio 500:1 (Typical)
Viewing Angle (H/V) 150o / 135o (Typical)
Display Resolution SXGA 1280 x 1024
Input Signal Analog
Response Time 4ms (GTG)
Net Dimension 377 x 373 x 200mm
(14.9" x 14.7" x 7.9")
Net Weight 5.0Kg (11.0lbs)

[ niceness @ 13.09.2006. 20:33 ] @

Citat:

Sta i gde menjati da proradi linux vec jednom???????????

Linux ti vec radi ... odavno. Samo X server ne radi.

Najbolje bi bilo da postavis ceo xorg.conf ovde, kao i /var/log/Xorg.0.log
Ali ajmo probati i ovako ...
Pre nego sto pocnes napravi backup xorg.conf fajla.
cp /etc/X11/xorg.conf /root/

U sekciju monitor stavi ovo:

Code:

Section "Monitor"
   Identifier   "F-417"
   Option      "DPMS"
   HorizSync   24-80
   VertRefresh   49-75
EndSection

Sekciju "modes" zakomentarisi (stavi ispred linije #) tako da izgleda ovako:

Code:

#Section "Modes"

#Indentifier "Modes[0]"
#Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806

#End Section

U sekciji "screen" stavi nesto ovako.
!!! "Identifier" i "Device" ostavi kako ti sada stoje, samo promeni "Monitor" u "F-417".

Code:

Section "Screen"
   Identifier   "Screen"
   Device      "moja_graf_kartica"
   Monitor      "F-417"
   DefaultDepth   24
   SubSection "Display"
      Depth      24
      Modes      "1280x1024" "1024x768" "800x600"
   EndSubSection
EndSection

Sacuvaj i probaj pokrenuti x.
$ startx

[ fade @ 13.09.2006. 20:56 ] @

Code:
cp /etc/X11/xorg.conf-vesa /etc/X11/xorg.conf

bar vidi ocel da potera pod "safe" modom il kako vec to da nazovem , ako oce ,onda kucash kao root

Code:
xorg.conf

i lepo ti izbaci interfejes da konfigurises to polako gledaj i sredice se.

[ djordje @ 13.09.2006. 21:01 ] @

Moze li meni reci neko, da ne otvaram drugu temu, kako na slackware 10.2 namestiti da se graficko okruzenje pokrece pri boot-ovanju?

[ niceness @ 13.09.2006. 21:09 ] @

@djordje
U /etc/inittab stavi da je default runlevel 4.

Code:

# Default runlevel. (Do not set to 0 or 6)
id:4:initdefault:

[ DArCo @ 13.09.2006. 23:57 ] @

Ne vredi odustacu ja od linuxa ako su svi ovako slozeni za podesavanje.......Sve sam promenio kako si napisao ali kad pokusam da sacuvam sa :wq on mi napise E212 cant open file for writing i ja nemam pojma dal je sacuvao uopste promene......nakon toga restartujem i ponovo se logujem i kad ukucam startx on izbaci

Fatal error server
server is already active for display 0

Kako prvo da sacuvam podesavanja kad nece ......ili on to sacuva iako mi pise ovo upozorenje...znaci prvo sam probao da sacuvam sa :wq ali nije hteo napisao mi da dodam! sto sam i uradio ali posle pise cant open for writing.....gde gresim??????????????

[ djordje @ 14.09.2006. 00:02 ] @

mozda se nisi ulogovao kao root ?

[ zoran_dojkic @ 14.09.2006. 12:16 ] @

Citat:

djordje: Moze li meni reci neko, da ne otvaram drugu temu, kako na slackware 10.2 namestiti da se graficko okruzenje pokrece pri boot-ovanju?

Pogledaj prvo http://www.elitesecurity.org/t174094

Instalacija Linux-a Slackware 10.1 - uputstvo za početnike

Za instalaciju Linux-a Slackware 10.1 treba da nabaviš program PowerQuest PartitionMagic 8.0 za particionisanje hard diska iz Windows-a i naravno sam Linux.
U PartitionMagic-u pritisni desnim klikom na C particiju, ili ako ih imaš više na poslednju po redu. Pritisni resize/move u polje Free Space After upiši 5000 pritisni OK. Pojaviće se sivo obojeno polje na koje treba da klikneš desnim klikom i izabereš Create. Pritisni strelicu pored polja Partition Type i iz padajuće liste izaberi Linux Ext3. Pritisni OK i ponovo desni klik na tako dobijenu ext3 particiju, izaberi resize/move, a u polje Free Space After upiši 500, pritisni OK, desni klik na novo dobijeno sivo polje, pritisni strelicu pored polja Partition Type i iz padajuće liste izaberi Linux Swap, pritisni OK. Na Linux ext3 particiju klikni desnim tasterom i izaberi Label... pa upiši Linux i pritisni OK. Sada pritisni Aplly (zeleno dugme u donjem levom uglu). Računar će se resetovati da bi napravio particije za Linux (videćeš bela slova na plavom ekranu, ne diraj ništa, sačekaj da se Windows ponovo pokrene), ukoliko sve uradi iz Windows-a, sačekaj i pritisni OK. Sada možeš da proveriš u PartitionMagic-u, da li imaš particije za Linux, jedna ext3 od otprilike 4500 MB i jedna swap od 500MB.
Ubaci CD 1 sa Linux Slackware 10.1 i resetuj računar. Kada na pozdravnom ekranu napiše “Welcome to Slackware 10.1“ i tako dalje, posle root: otkucaj
bareacpi.i
trebalo bi da u poslednjem redu piše ovako:
root:bareacpi.i
Sada pritisni enter (ukoliko umesto instalacije Linuxa krene Windows treba da u BIOS-u podesiš but ovim redosledom: 1.disketa; 2.CD; 3.hard disk). Tek sada ubaci disketu. Sačekaj da se na ekranu na dnu pojavi tekst „Enter 1 to select a keyboard map:“ Ništa ne upisuj, samo pritisni enter.
Sada piše:
You may now login as ’root’
Slackware login:
upiši:
root
i pritisni enter.
Opet čitamo samo donji red:
root@slackware:/#
upiši:
setup
i pritisni enter, da se pojavi:
Slackware Linux setup (version10.1)
Izabrano je Help i kursor trepće na OK. Na tastaturi pritisni dva puta strelicu na dole tako da bude izabrano:
ADDSWAP Setup your swap partition(s)
Kursor trepće na OK, pritisni enter.
SWAP SPACE DETECTED
Kod mene piše da je pronašao particiju:
/dev/hda9 (neki brojevi) 82 Linux swap
Trepće YES , pritisni enter.
SWAP SPACE CONFIGURED
Pritisni enter.
SELECT LINUX INSTALATION PARTITION
Pošto je u Windows-ovom Partitiom Magic-u u polje Label za ext3 particiju upisano Linux, sada piše:
/dev/hda8 Linux 4831471K
Kursor je na select, pritisni enter.
FORMAT PARTITION /dev/hda8
Kod tebe piše broj tvoje particije za Linux. Ostavi izabrano:
Format Qick format with no bad block checking
Enter na OK.
SELECT FILESYSTEM FOR /dev/hda8
Naravno ponovo piše broj tvoje particije za Linux, izaberi strelicom na gore, na tastaturi:
ext3
Enter na OK.
SELECT INODE DENSITY FOR /dev/hda8
Ostavi:
(default)
Enter na OK.
Kada završi formatiranje na
DONE ADDING LINUX PARTITIONS TO /dev/hda8
pritisni enter na OK.
Pošto na računaru već imaš instaliran Windows, pita te da li želiš da se iz Linuxa vide Windowsove NTFS i FAT particije, pritisni enter na YES.
SELECT PARTITION TO ADD TO /etc/fstab
Sada radi pažljivo. Ako u Windowsu imaš samo jednu C-e particiju, pisaće:
/dev/hda1 (vrsta particije) (veličina u KB)
Ta particija je već izabrana pa pritisni enter na select.
PICK MOUNT POINT FOR /dev/hda1
Kursor trepće u praznom polju, upiši:
/windows
enter na OK.
Ako imaš više od jedne particije za Windows ponovo smo na:
SELECT PARTITION TO ADD TO /etc/fstab
Označena je prva particija, piše:
(IN USE)
pritisni strelicu na dole, na tastaturi, da izabereš sledeću particiju pa zatim pritisni enter na select i upiši:
/windows2
Ako imaš još particija, ponovi postupak tako što ćeš strelicom na dole na tastaturi doći do sledeće neizabrane particije i obeležiti je sa /windows3 pa /windows4 i tako dalje. Radi se zapravo o tome da je jedino bitna kosa crta na početku, a posle možeš da upišeš bilo koji naziv za particiju tako da su imena različita i najbolje je da su kratka i bez ikakvih razmaka i velikih slova. Ponavljam: kosa crta na početku i različiti nazivi.
Kada završiš sa obeležavanjem particija, treba da stigneš do:
DONE ADDING FAT or NTFS Partitions
piše
/dev/hda1 /windows
i tako dalje za sve particije, pritisni enter na OK.
SOURCE MEDIA SELECTION
Ostavi izabrano:
1.Instal from a Slackware CD or DVD
enter na OK.
SCANING FOR CD or DVD DRIVE
Ostavi na:
auto
enter na OK.
Sačekaj da se pojavi:
PACKAGE SERIES SELECTION
i samo pritisni enter na OK.
SELECTION PROMPTING MODE
Ostavi na:
full
enter na OK.
Kreće instalacija paketa sa prvog CD-a. (Ja imam Slackware 10.1 na 2 CD-a.) Kada završi sa prvim CD-om otvara drajv, zameni disk i pritisni enter, Linux sam zatvara vratanca i nastavlja instalaciju.
INSTALL LINUX KERNEL
Spusti strelicom na dole na:
skip
enter na OK.
MAKE BOOTDISK
Spusti strelicom na dole na:
skip Skip making a bootdisk
strelica na desno, enter na Skip.
Pošto verovatno imaš winmodem, ostavi izabrano:
no modem
enter na OK.
ENABLE HOTPLUG SUBSYSTEM AT BOOT
Enter na YES.
INSTAL LILO
Spusti strelicom na dole na:
expert
enter na OK.
EXPERT LILO INSTALLATION
Ostavi:
begin
enter na OK.
OPTIONAL LILO append=”<kernel parameters>” Line
Prepiši ono što piše gore:
hdc=ide-scsi
enter na OK.
CONFIGURE LILO TO USE FRAME BUFFER CONSOLE
Kod mene je izabrano:
1024x768x256
Izaberi odgovarajuću rezoluciju za tvoj monitor i pritisni enter na <OK>.
SELECT LILO TARGET LOCATION
Proveri da li je disketa ubačena, izaberi strelicom na dole:
Floppy
enter na OK.
CHOSE LILO TIMEOUT
Strelicom na dole izaberi 30 sek. Enter na OK.
Ponovo smo na:
EXPERT LILO INSTALLATION
Sada izaberi strelicom na dole:
Linux
enter na OK.
Još jednom:
EXPERT LILO INSTALLATION
Strelicom na dole na:
Windows
SELECT WINDOWS PARTITION
Upiši ono što piše ispod Device Boot, a označeno je zvezdicom, trebalo bi da bude:
/dev/hda1
znači upisuješ bez zvezdice, enter na OK.
SELECT PARTITION NAME
Upiši:
Windows
enter na OK.
Još jednom:
EXPERT LILO INSTALLATION
Ovaj put idemo na:
/install
enter na OK.
MOUSE CONFIGURATION
Izaberi svoju vrstu miša (ja biram: usb), enter na OK.
GPM CONFIGURATION
Enter na YES.
CONFIGURE NETWORK
Izaberi strelicom na desno na tastaturi NO i pritisni enter.
CONFIRM STARTUP SERWEES TO RUN
Ovde ostavi sve kako jeste i pritisni enter na OK.
CONSOLE FONT CONFIGURATION
Enter na NO.
HARDWER CLOCK SET TO UTC?
Ponovo ostavi na:
NO
enter na OK.
TAMEZONE CONFIGURATION
Drži strelicu na dole na tastaturi dok ne dođeš do:
Europe/Belgrade
ako preteraš, a to se uvek desi, vrati se naravno strelicom na gore, enter na OK.
SELECT DEFAULT WINDOW MANAGER FOR X
Ostavi na:
xiniutrc.kde
enter na OK.
WARNING: NO ROOT PASSWORD DETECTED
Strelicom na desno do NO, enter.

SETUP COMPLETE
Pritisni kombinaciju tastera ctrl+alt+del kao što i piše (ne pritiskaj enter). Izvadi disk, ostavi disketu. Kada se pojavi crveni Lilo, pritisni enter da krene Linux (strelicom na dole biraš Windows kao što i piše).
Kada se u donja dva reda na crnom ekranu belim slovima pojavi:
Welcome to Linux 2.4.29 (tty1)
darkstar login:
upiši
root
i pritisni enter.
Pingvin sedi gore na slovima, a dole piše:
root@darkstar:~#
upiši
startx
i pritisni enter. Evo slike.
Pritiskaj nekst ili preskoči čarobnjaka. Ne biraj srpsku tastaturu jer ne rade sva slova. Windows particije su ti u Home-Devices. Za GNOME umesto root upiši gde pa kad zatraži username piši root. Za čitanje Linux particija iz Windowsa možeš pored dodatka za Komander da koristiš i PartitionMagic 8.0.

--- Ovo uputstvo odštampaj ili prepiši, trebaće ti, jer budala pamti, a pametan piše.---
[email protected] tel. 064/110-26-18

[ djordje @ 14.09.2006. 14:15 ] @

Procitaj pitanje sledeci put pre nego sto se raspises toliko

Sve to znam sto si napisao pitanje je bilo kako da se graficko okruzenje startuje bez "startx" tj, automatski prilikom boot-a.

Hvala na trudu, nekome ce posluziti

Citat:

U /etc/inittab stavi da je default runlevel 4.

To radi.

_{[Ovu poruku je menjao djordje dana 14.09.2006. u 17:20 GMT+1]}

[ DArCo @ 14.09.2006. 19:09 ] @

Problem je bio u tome naravno jer nisam se logovao root...kad sam to uradio sve je sacuvao ali startx i dalje nece..Ispisuje FATAL ERROR no Screens found......Sta dalje? Sta da upisem pod screeen Sekciju da bi pronasao Screen?

[ niceness @ 14.09.2006. 20:54 ] @

Ajde ti daj ceo xorg.conf.

[ DArCo @ 14.09.2006. 20:58 ] @

Vrlo rado bih ja to uradio ali kako? linux mi je na particiji koju windows ne vidi......kako da iskopiram onda taj fajl? imaj u vidu da sam pocnetnik i da ne znam ni gde se nalazi taj fajl.......hvala........

[ DArCo @ 14.09.2006. 21:02 ] @

Ok snasao sam se. Evo ga taj fajl:

# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
Identifier "Neovo"
VendorName "Plug'n Play"
ModelName "F-417"
HorizSync 24-80
VertRefresh 49-75

Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)
# ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
# ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
# ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "GeForce 7300 LE"
Driver "fbdev"
Option "DPMS"
EndSection

Section "Screen"
Device "GeForce 7300 LE"
Monitor "F-417"
DefaultColorDepth 16

Subsection "Display"
Depth 16
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 24
Virtual 1280 1024
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection

Znaci ja sam nesto prckao ali nista nisam uradio naravno.

[ DArCo @ 14.09.2006. 21:05 ] @

Samo da dodam da je u pitanju Mandriva Linux posto mi je Suse nesto sjebao i smanjio particije neke pa sam morao da ga obrisem......Cisto info ako ima neke razlike u Suse i Mandriva..........

[ Vlade Maksimovic @ 14.09.2006. 21:27 ] @

Mislim da bi deo:
Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)
# ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync

Trebao da se napise:
#Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)
ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync

[ DArCo @ 14.09.2006. 21:43 ] @

Bilo je tako ali nije htelo da radi pa sam ja nesto kao prckao.......

[ Vlade Maksimovic @ 14.09.2006. 21:55 ] @

Probaj da dodas liniju:
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632

nemoj je komentarisati (stavljati ispred tarabu)
dok linije koje imas iskomentarisi

#Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)
# ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
# ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
# ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632

[ niceness @ 14.09.2006. 21:56 ] @

U Section "Screen" dodaj

Code:
Identifier "screen1"

pa probaj pokrenuti.

[ DArCo @ 15.09.2006. 01:12 ] @

# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
Identifier "Neovo"
VendorName "Plug'n Play"
ModelName "F-417"
HorizSync 24-80
VertRefresh 49-75

# Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)
# ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
# ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
# ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "GeForce 7300 LE"
Driver "fbdev"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "GeForce 7300 LE"
Monitor "F-417"
DefaultColorDepth 16

Subsection "Display"
Depth 16
Virtual 1280 1024
EndSubsection

Subsection "Display"
Depth 24
Virtual 1280 1024
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection

ok sad ovako izgleda config fajl i i dalje nece da pokrene sliku...........Evo i log fajl

This is a pre-release version of the The X.Org Foundation X11.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the The X.Org Foundation "monolithic tree" CVS
repository hosted at http://www.freedesktop.org/Software/xorg/
X Window System Version 6.8.99.900 (6.9.0 RC 0)
Release Date: 01 August 2005 + cvs
X Protocol Version 11, Revision 0, Release 6.8.99.900
Build Operating System: Linux 2.6.12-12mdksmp i686 [ELF]
Current Operating System: Linux linux 2.6.12-12mdk #1 Fri Sep 9 18:15:22 CEST 2005 i686
Build Date: 16 September 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 14 21:55:47 2006
(==) Using config file: "/etc/X11/xorg.conf"
Data incomplete in file /etc/X11/xorg.conf
Undefined Monitor "F-417" referenced by Screen "screen1".
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(WW) xf86CloseConsole: VT_GETSTATE failed: Bad file descriptor
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor

[ niceness @ 15.09.2006. 01:22 ] @

Promeni u sekciji "Monitor" Identifier "Neovo" u Identifier "F-417".

[ DArCo @ 15.09.2006. 02:41 ] @

Promenio sam. evo ga novi conf i log posto i dalje nece............Samo da pitam kad sacuvam podesavanja samo treba da kucam startx i enter? Da ja tu nesto ne gresim?

Build Date: 16 September 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 14 23:28:47 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "F-417"
(**) | |-->Device "GeForce 7300 LE"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(**) Option "XkbOptions" "compose:rwin"
(**) XKB: options: "compose:rwin"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0059 card 1043,812a rev a2 class 04,01,00 hdr 00
(II) PCI: 00:06:0: chip 10de,0053 card 1043,815a rev f2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1043,8141 rev a3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,01d1 card 1043,81ff rev a1 class 03,00,00 hdr 00
(II) PCI: 05:06:0: chip 13d0,2103 card 13d0,2103 rev 02 class 02,80,00 hdr 00
(II) PCI: 05:08:0: chip 14f1,2f00 card 14f1,2004 rev 01 class 07,80,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xd3000000 - 0xd30fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd2ffffff (0x3000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x01d1) rev 161, Mem @ 0xd0000000/24, 0xc0000000/28, 0xd1000000/24, BIOS @ 0xd2000000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xd3010000 - 0xd301ffff (0x10000) MX[B]
[1] -1 0 0xd3000000 - 0xd300ffff (0x10000) MX[B]
[2] -1 0 0xd3100000 - 0xd3100fff (0x1000) MX[B]
[3] -1 0 0xd3101000 - 0xd3101fff (0x1000) MX[B]
[4] -1 0 0xd3102000 - 0xd3102fff (0x1000) MX[B]
[5] -1 0 0xd3103000 - 0xd3103fff (0x1000) MX[B]
[6] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[7] -1 0 0xd3104000 - 0xd3104fff (0x1000) MX[B]
[8] -1 0 0xd2000000 - 0xd2020001 (0x20002) MX[B](B)
[9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
[13] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[14] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[15] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
[16] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[17] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[18] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[19] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[20] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[21] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[22] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[23] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[24] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[26] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[27] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[28] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[29] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[30] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd3010000 - 0xd301ffff (0x10000) MX[B]
[1] -1 0 0xd3000000 - 0xd300ffff (0x10000) MX[B]
[2] -1 0 0xd3100000 - 0xd3100fff (0x1000) MX[B]
[3] -1 0 0xd3101000 - 0xd3101fff (0x1000) MX[B]
[4] -1 0 0xd3102000 - 0xd3102fff (0x1000) MX[B]
[5] -1 0 0xd3103000 - 0xd3103fff (0x1000) MX[B]
[6] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[7] -1 0 0xd3104000 - 0xd3104fff (0x1000) MX[B]
[8] -1 0 0xd2000000 - 0xd2020001 (0x20002) MX[B](B)
[9] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[10] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
[13] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[14] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[15] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
[16] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[17] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[18] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[19] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[20] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[21] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[22] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[23] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[24] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[25] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[26] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[27] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[28] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[29] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[30] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd3010000 - 0xd301ffff (0x10000) MX[B]
[6] -1 0 0xd3000000 - 0xd300ffff (0x10000) MX[B]
[7] -1 0 0xd3100000 - 0xd3100fff (0x1000) MX[B]
[8] -1 0 0xd3101000 - 0xd3101fff (0x1000) MX[B]
[9] -1 0 0xd3102000 - 0xd3102fff (0x1000) MX[B]
[10] -1 0 0xd3103000 - 0xd3103fff (0x1000) MX[B]
[11] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[12] -1 0 0xd3104000 - 0xd3104fff (0x1000) MX[B]
[13] -1 0 0xd2000000 - 0xd2020001 (0x20002) MX[B](B)
[14] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[16] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000a400 - 0x0000a407 (0x8) IX[B]
[20] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[21] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[22] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
[23] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[24] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[25] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[26] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[27] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[28] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[29] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[30] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[31] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[32] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[33] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[34] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[35] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[36] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[37] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.99.900, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "fbdev"
(II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) FBDEV: driver for framebuffer: fbdev, afb
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 0.0.2
ABI class: X.Org Video Driver, version 0.7
(EE) open /dev/fb0: No such file or directory
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

[ DArCo @ 15.09.2006. 02:42 ] @

[ Vlade Maksimovic @ 15.09.2006. 07:25 ] @

Evo prikacicu ti moj xorg.conf mozda ti nesto pomogne

_{[Ovu poruku je menjao Vlade Maksimovic dana 15.09.2006. u 09:02 GMT+1]}

[ niceness @ 15.09.2006. 10:22 ] @

(EE) open /dev/fb0: No such file or directory
(EE) No devices detected.

Kao sto pise ne moze da nadje (ili otvori) uredjaj /dev/fb0.

Tek sam sad primetio da u "Device" sekciji pise Driver "fbdev".
Probaj ovo promeniti u "nv".

Takodje ne bi bilo lose da instaliras nvidia drivere.
Sajt: http://www.nvidia.com/object/linux_display_ia32_1.0-8774.html

Procitaj README za vise informacija.
Downloaduj driver i stavi ga u neki direkorijum.

Ovde ima neko uputstvo za mandrake, valjda vredi i za mandivu.
http://www.mandrake.tips.4.free.fr/nvidiainst.html