[ davor.v @ 27.03.2015. 12:06 ] @
Iznenada mi se pojavio problem sa tastaturom koji se manifestuje tako da ne mogu da otkucam nijedan znak, osim sto mogu da ukljucim num lock i npr. tipku power.
Ponekad ako jako i uporno pritiscem neku tipku pojavi mi se slovo/znak, ali to jako tesko ide. Kao da su tipke ukocene.
Zbunjuje me to što mi se ovo dešava samo na linuxu ( mint ) koji usput da spomenem koristim nekih pola godine i jako sam zadovoljan.
Ovo pišem sa windowsa jer mi na njemu tastatura radi potpuno tečno, lako i normalno ( windows imam instalisan otprije i njega jako rijetko koristim, tj. imam instalisana oba sistema i preko gruba sam namjestio da mi se diže mint kad palim komp ).
Hvala unapred na pomoći u rješavanju ovog za mene prilično misterioznog problema. I frustrirajućeg prilično.
[ plus_minus @ 27.03.2015. 12:46 ] @
Ajd' probaj da nekako uđeš u konzolu.. bez startovanja X na tom linuxu. Vidi iz grub-a imaš li recovery opciju, itd.

Pa kad se dočepaš konzole, ukucaj sledeće. (ako se domogneš konzole kao root korisnik, onda bez sudo.. pretpostavljam da to znaš):

sudo nano /etc/default/keyboard


Napravi taj fajl da izgleda kao u primeru. *(kod mene na konfi, keyboard fajl izgleda identično)
Ako treba bekapuj pre izmene.

Code:

# KEYBOARD CONFIGURATION FILE

# Consult the keyboard(5) manual page.

XKBMODEL="a4techKBS8"
XKBLAYOUT="us,rs,rs"
XKBVARIANT=",latin,"
XKBOPTIONS="grp:lalt_lshift_toggle"

BACKSPACE="guess"


Prva dva reda (zapravo, prve dve linije gde ima teksta, komentari, jel' te) ne moraš ...

XKBMODEL - stavi da bude pc105 ako ne znaš koji ti je model tastature.
XKBLAYOUT - stavi da bude us, rs (ako koristiš samo engleski i naše latinično pismo)
XKBVARIANT - varijante za XKBLAYOUT. U datom primeru ide prazno, latin, prazno. Kada je prazno, to je onda default za taj i taj layout.
Dakle, ako ti treba EN_US, SR_LATIN, SR (ćirilica), ne menjaj ništa.

Ako ti je tastatura SR_LATIN ili ima naša slova i ne treba ti ćirilica, onda:

Code:

XKBLAYOUT="rs,us"
XKBVARIANT="latin,"  


XKBOPTIONS ostavi da bude tako kako jeste. Levi Alt+ Levi Shift (m$ standard) menjanje layout-a.

Snimi fajl, restartuj mašinu, pa vidi šta se dešava. Ako nema promena, viči, naći će se neko rešenje.. ja, neko drugi, nebitno .. Vidi šta ti kaže ~/.bash_history fajl.. koje si sve komande kucao .. pa probaj da odeš u "rikverc" jer, tek tako samo od sebe.. ili je tastatura (jel' usb?) vrisnula ili si instalirao nešto što je odradelo posao 'vraški' dobro. A ako radi u m$, znači da ti tastatura ne riknjava već si ti nešto zeznuo..
[ davor.v @ 27.03.2015. 13:50 ] @
Pokusavao sam da startam recovery i tek tamo ništa ne razumijem jer mi nudi neke opcije koje uopšte ne znam za šta su.
Problem je što mogu da udjem u terminal kod normalno podignutog sistema ( pretpostavljam da na to mislite kad kažete konzola ) ali ne mogu da otkucam nijedan znak, ništa.
[ plus_minus @ 27.03.2015. 14:00 ] @
A jel' ti tastatura na usb ili je PS-2 port?

Imaš li neku drugu tastaturu.. ?

Imaš li medijum (dvd, fleška) sa kojeg si instalirao taj mint?

Da li je taj medijum napravljen kao LiVE image?

Ako jeste u LIVE varijanti, pokreni ga kao LIVE.. da li i tada ne radi tastatura?

Pazi sad ovo...

Citat:
Iznenada mi se pojavio problem sa tastaturom


.. taj deo... to "iznenada" toliko mnogo krije iza sebe, da je to dobar posao čak i za Poaro-a.

Ovde, na ovom forumu, nema kristalne kugle i nagađanja. Neće to niko da radi.

To iznenada, ukoliko nije hardverski kvar, NIKADA ne može da bude iznenada.

Uvek postoji uzrok *(ljudski faktor, greška). A uzrok, do detalja, šta si činio sa tim linuxom (instalirao/probao/apdejtovao/brisao/vežbao se/konektovao se negde, itd..) pre nego što je došlo - iznenada, to za sad, znaš samo ti...
[ davor.v @ 27.03.2015. 14:13 ] @
tastatura je na usb
pokušao sam i drugu tastaturu i ona takođe ne radi
imam sistem na fleški i pokušaću da pokrenem live da vidim hoće li biti isti problem
iako sam sklon probavanju i eksperimentisanju u tom vremenu nisam nisšta ni instalisao i problem mi se zasita pojavio odjednom
ne mogu da se sjetim ničega što bi možda moglo da uzrokuje problem pa sam se zbog toga i obratio vama
[ gilopile @ 27.03.2015. 14:34 ] @
Druga tastatura je USB ili PS2? Ako se isto desava sa PS2, onda stvarno ne bih znao sta moze biti uzrok, jedino da probas da slucajno u BIOS-u nije enable-ovano `usb keyboard support` ( ako su obe USB ), pa moze i to da pravi problem, bar u DOS-u je tako, za Linux nisam siguran.
[ davor.v @ 27.03.2015. 14:47 ] @
Obe tastature su usb. Posto sam sa vermenom tanak, pokusacu da uradim sve sto mogu i znam cim prije pa cu vam javiti ima li kakvih promjena.
[ gilopile @ 27.03.2015. 14:49 ] @
Proveri onda da li je u BIOS-u eneble USB key. support.
[ davor.v @ 27.03.2015. 15:11 ] @
usao preko live usb i tastatura radi normalno
sada koristim live linux mint dok ovo pisem
cekirano usb keyboard support

sad cu neko vrijeme koristiti ovu live usb verziju dok ne vidim kako biste mi savjetovali da rijesim problem sa instalisanom verzijom
ili da uradim reinstal sistema kao sto sam navikao da radim sa windowsom

[Ovu poruku je menjao davor.v dana 27.03.2015. u 16:23 GMT+1]
[ plus_minus @ 27.03.2015. 15:26 ] @
Live neće ništa da pamti posle restarta a i mnogo sporije radi ... live služi za instalaciju, probu, rescue i eto, ovakve situacije u kojoj si ti trenutno.

Sada preko tog live USB-a uradi ono što sam opisao u prvom postu.

ALI! .. pazi u koji ćeš /etc direktorijum da zađeš.. nemoj da menjaš /etc/default/keyboard fajl iz LIVE /etc direktorijuma već to uradi na particiji gde ti je instaliran Mint.
[ davor.v @ 27.03.2015. 15:37 ] @
Code:
# Check /usr/share/doc/keyboard-configuration/README.Debian for
# documentation on what to do after having modified this file.

# The following variables describe your keyboard and can have the same
# values as the XkbModel, XkbLayout, XkbVariant and XkbOptions options
# in /etc/X11/xorg.conf.

XKBMODEL="pc105"
XKBLAYOUT="us,rs,rs"
XKBVARIANT=",latin,"
XKBOPTIONS="grp:lalt_lshift_toggle"

# If you don't want to use the XKB layout on the console, you can
# specify an alternative keymap.  Make sure it will be accessible
# before /usr is mounted.
# KMAP=/etc/console-setup/defkeymap.kmap.gz




^G Get Help  ^O WriteOut  ^R Read File ^Y Prev Page ^K Cut Text  ^C Cur Pos
^X Exit      ^J Justify   ^W Where Is  ^V Next Page ^U UnCut Text^T To Spell
Upisao sam vrijednosti ali ne znam kako da snimim fajl, odnosno da sacuvam to.
ovo je u live a posto ne mogu da kucam u instalisanom linuxu moze li se sa copy paste uraditi ono sto je potrebno
[ plus_minus @ 27.03.2015. 15:56 ] @
Snimiš promene tako što pritisneš CTRL+X. Pitaće te jel' hoćeš da snimiš promene, potvrdiš sa jednim velikim Y i potvriš ime fajla. Ime fajla ostaje isto.

Ne moraš ti to iz nano možeš i iz Geany-a, gedit-a .. ako imaš Grafičko okruženje, onda bilo koji tekstualni editor. Umesto sudo nano ... ti ukucaj sudo gedit /etc/default/keyboard

Inače, može i sa copy paste..

I pazi dakle KOJI keyboard file edituješ.

dodaj i

BACKSPACE="guess"

na kraju xkb direktiva.

[ davor.v @ 27.03.2015. 16:34 ] @
Onako je izgledalo nakon sto sam upisao promjene u terminalu live verzije.

Problem je sto ja ne mogu sad nijedno slovo da ukucam pa cu pokusati copy paste sistemom da to odradim.
Moze li to u onom text editoru da se uradi pa sacuva.
[ plus_minus @ 27.03.2015. 16:51 ] @
Može u bilo kom editoru.
[ davor.v @ 27.03.2015. 17:21 ] @
@plus_minus

Poštovani,

nakon stalnog dizanja oba sistema i pokušavanja da uradim nešto po pitanju mog problema a veoma zahvalan vama na savjetima i utrošenom vremenu postao sam skroz zbunjen i sad više ne znam šta da uradim
Molim vas da mi još jednom ukratko korak po korak objasnite ( moje znanje o sistemu linux je vrlo skromno i koristio sam ga kao i windows a skoro nikako se nisam sluzio terminalom ili editorima )
Da li postoji mogućnost i da lje to upšte izvodivo da neko daljinski preko npr. team wiewera uđe i odradi to što treba.
Ja jednostavno ne mogu da koristim tamo tastaturu uopšte i ne znam kako da uradim to što treba.
Nijedan znak više ne mogu ma koliko pritiskao da dobijem.
[ davor.v @ 27.03.2015. 19:07 ] @
Code:
# Check /usr/share/doc/keyboard-configuration/README.Debian for
# documentation on what to do after having modified this file.

# The following variables describe your keyboard and can have the same
# values as the XkbModel, XkbLayout, XkbVariant and XkbOptions options
# in /etc/X11/xorg.conf.

XKBMODEL="pc105"
XKBLAYOUT="rs,rs,rs"
XKBVARIANT="latin,"
XKBOPTIONS="grp:alt_shift_toggle,grp_led:scroll"
BACKSPACE="guess"
# If you don't want to use the XKB layout on the console, you can
# specify an alternative keymap.  Make sure it will be accessible
# before /usr is mounted.
# KMAP=/etc/console-setup/defkeymap.kmap.gz



           [ Error writing /etc/default/keyboard: Permission denied ]
^G Get Help  ^O WriteOut  ^R Read File ^Y Prev Page ^K Cut Text  ^C Cur Pos
^X Exit      ^J Justify   ^W Where Is  ^V Next Page ^U UnCut Text^T To Spell
Otpali mi prsti da nekako ubacim copy paste sistemom onako pripremljen tekst i ubacio sam BACKSPACE="guess" i lupao Ctrl+X i dobijem polja za potvrdu i kopiram slovo Y i javi mi neku gresku.
Sta to nisam dobro uradio ?



[Ovu poruku je menjao davor.v dana 27.03.2015. u 21:58 GMT+1]

[Ovu poruku je menjao davor.v dana 27.03.2015. u 21:58 GMT+1]

[Ovu poruku je menjao davor.v dana 27.03.2015. u 21:59 GMT+1]
[ vladared @ 27.03.2015. 22:12 ] @
Koju gresku javlja? Tipujem da si isao na /etc/default/keyboard a u principu bi ti bilo bolje da si startovao delphim ili sta vec imas, mountovao particiju na kojoj ti se nalazi linux, iz konzoke ukucao npr sudo gedit i onda sa file open otici na mountovanu particiju i tu edtovati putanju etc/default/keyboard. Tako bi trebalo da radi.
[ plus_minus @ 28.03.2015. 01:18 ] @
Postoji još jedna zafrkancija.. taj /etc/default/keyboard i ne postoji u nekim distribucijama. xfce može lepo da radi i bez toga. Ne znamo da li je taj fajl bio prisutan ili ne. Pa ako ga jeste imao pa odjednom nije, onda može da pokuša ovo što sam predložio, to mi je prvo palo na pamet, da to uradi pa onda sledeće, ako treba, šta već nije..

@davor.v

Teamviewer, za ovo, ne treba.

Treba ti ovo - http://www.howtogeek.com/howto...inux-command-line-text-editor/

ili ovo

man nano
[ SStudio @ 28.03.2015. 08:17 ] @
@Davor
Lepo si ti opisao problem, ali ajde sad od početka.
Prvo navedi koji je harvdver kojim raspolažeš, barem onaj deo koji se tiče matične ploče, kako bi razgraničili i izbacili mogućnost UEFI problema.
Takođe ne bi bilo loše da probaš da isčupaš tastaturu "na živo" i uključiš opet na usb port, da li tada radi?
Ako u nekom delu proradi, u konzolu ukucaj dmesg i lsusb komande i ono što prikaže okači ovde.
Usput odeš na System settings > Input devices > Keyboard i kaži šta tamo prikazuje, koji tip tastature je odabran?
[ lega99 @ 28.03.2015. 09:49 ] @
Code:
# Check /usr/share/doc/keyboard-configuration/README.Debian for
# documentation on what to do after having modified this file.

# The following variables describe your keyboard and can have the same
# values as the XkbModel, XkbLayout, XkbVariant and XkbOptions options
# in /etc/X11/xorg.conf.

XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT="alt-intl"
XKBOPTIONS=""

# If you don't want to use the XKB layout on the console, you can
# specify an alternative keymap.  Make sure it will be accessible
# before /usr is mounted.
# KMAP=/etc/console-setup/defkeymap.kmap.gz


Ovo ti je sav sadrzaj /etc/default/keyboard , digni masinu preko live USB, mauntuj linux particiju,
prepisi file preko postojeceg. Da bi odradilo koristi sudo, ako je XFCE imas thunar file manager,
startuj ga sa sudo sa live USB nadji svoj linux i sredi taj file. Ako ne pomogne dalje ne znam....
[ davor.v @ 28.03.2015. 13:44 ] @
@vladared
prilicno mi je nerazumljivo ovo sto si napisao jer kako sto rekoh ja sam ispodprosjecnog znanja o Linuxu a terminal ili konzolu skoro i ne koristim
osjetim se duzan da saradjujem sa vama pa cu pokusati da svakom odgovorim

@SStudio

isto ne radi tastatura kad ju iskopcam pa ukopcam u drugi port, tj. mogu da kucam ali za svaki znak moram da podere, jagodice, tj. kao da je ukocena
mnogo tesko dobijem svaki znak i da vam ovo napisem trebalo bi mi pola dana pa koristim win koji imam odavno instalisan na ovom kompu
Hardwer

CPU

Intel Celeron E3300 @ 2.50GHz
Wolfdale 45nm Technology

RAM

2.00GB Single-Channel DDR2 @ 399MHz (5-5-5-18)

Motherboard

MICRO-STAR INTERNATIONAL CO.,LTD G31TM-P21 (MS-7529) (CPU1

uspio sam tamo da upisem one dve komande pa evo kopirano iz terminala

dmesg

0.125537] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.125540] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.125736] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.125739] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.125742] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.125744] system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.125747] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.125874] pnp: PnP ACPI: found 15 devices
[ 0.125875] ACPI: bus type PNP unregistered
[ 0.125879] PnPBIOS: Disabled by ACPI PNP
[ 0.162362] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.162367] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.162370] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.162386] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.162390] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.162392] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.162395] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.162400] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.162403] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.162406] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.162409] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.162412] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.162416] pci 0000:00:01.0: bridge window [mem 0xfcf00000-0xfdffffff]
[ 0.162419] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.162424] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.162426] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.162431] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.162435] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.162440] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.162443] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.162448] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.162452] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[ 0.162457] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.162467] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.162469] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.162472] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.162474] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.162476] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.162478] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.162480] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.162482] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfdffffff]
[ 0.162484] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.162486] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.162488] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[ 0.162490] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.162493] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.162495] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.162497] pci_bus 0000:03: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
[ 0.162499] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.162501] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.162503] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.162505] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.162507] pci_bus 0000:04: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.162509] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.162547] NET: Registered protocol family 2
[ 0.162750] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.162765] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.162790] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.162813] TCP: reno registered
[ 0.162816] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.162824] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.162883] NET: Registered protocol family 1
[ 0.163517] pci 0000:01:00.0: Boot video device
[ 0.163531] PCI: CLS 32 bytes, default 64
[ 0.163585] Trying to unpack rootfs image as initramfs...
[ 0.682480] Freeing initrd memory: 26724K (f4bbe000 - f65d7000)
[ 0.682707] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[ 0.682711] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
[ 0.682789] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.682791] Scanning for low memory corruption every 60 seconds
[ 0.683065] Initialise system trusted keyring
[ 0.683108] audit: initializing netlink socket (disabled)
[ 0.683122] type=2000 audit(1427542927.680:1): initialized
[ 0.704715] bounce pool size: 64 pages
[ 0.704730] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.706076] zbud: loaded
[ 0.706137] VFS: Disk quotas dquot_6.5.2
[ 0.706188] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.706663] fuse init (API version 7.22)
[ 0.706749] msgmni has been set to 1717
[ 0.706817] Key type big_key registered
[ 0.707141] Key type asymmetric registered
[ 0.707143] Asymmetric key parser 'x509' registered
[ 0.707178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.707208] io scheduler noop registered
[ 0.707210] io scheduler deadline registered (default)
[ 0.707240] io scheduler cfq registered
[ 0.707438] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.707485] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.707553] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.707672] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.707742] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.707757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.707811] intel_idle: does not run on family 6 model 23
[ 0.707817] ipmi message handler version 39.2
[ 0.707894] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.707899] ACPI: Power Button [PWRB]
[ 0.707936] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.707939] ACPI: Power Button [PWRF]
[ 0.708076] GHES: HEST is not enabled!
[ 0.708117] isapnp: Scanning for PnP cards...
[ 0.712051] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.732430] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.752795] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.753974] Linux agpgart interface v0.103
[ 0.755458] brd: module loaded
[ 0.756187] loop: module loaded
[ 0.756319] ata_piix 0000:00:1f.1: version 2.13
[ 0.760046] scsi0 : ata_piix
[ 0.760106] scsi1 : ata_piix
[ 0.760139] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.760141] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.760216] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.761267] scsi2 : ata_piix
[ 0.761317] scsi3 : ata_piix
[ 0.761352] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.761354] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.761673] libphy: Fixed MDIO Bus: probed
[ 0.761778] tun: Universal TUN/TAP device driver, 1.6
[ 0.761779] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.761827] PPP generic driver version 2.4.2
[ 0.761872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.761877] ehci-pci: EHCI PCI platform driver
[ 0.761979] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.761986] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.761999] ehci-pci 0000:00:1d.7: debug port 1
[ 0.765907] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.765923] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeafbc00
[ 0.776014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.776089] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.776092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.776095] usb usb1: Product: EHCI Host Controller
[ 0.776098] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[ 0.776100] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.776239] hub 1-0:1.0: USB hub found
[ 0.776249] hub 1-0:1.0: 8 ports detected
[ 0.776441] ehci-platform: EHCI generic platform driver
[ 0.776451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.776453] ohci-pci: OHCI PCI platform driver
[ 0.776464] ohci-platform: OHCI generic platform driver
[ 0.776471] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.776556] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.776561] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.776583] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[ 0.776631] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.776633] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.776635] usb usb2: Product: UHCI Host Controller
[ 0.776637] usb usb2: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
[ 0.776639] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.776729] hub 2-0:1.0: USB hub found
[ 0.776736] hub 2-0:1.0: 2 ports detected
[ 0.776876] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.776881] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.776902] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
[ 0.776946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.776948] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.776950] usb usb3: Product: UHCI Host Controller
[ 0.776952] usb usb3: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
[ 0.776954] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.777037] hub 3-0:1.0: USB hub found
[ 0.777044] hub 3-0:1.0: 2 ports detected
[ 0.777181] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.777185] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.777218] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[ 0.777262] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.777264] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.777266] usb usb4: Product: UHCI Host Controller
[ 0.777268] usb usb4: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
[ 0.777270] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.777357] hub 4-0:1.0: USB hub found
[ 0.777363] hub 4-0:1.0: 2 ports detected
[ 0.777504] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.777509] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.777538] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
[ 0.777584] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.777586] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.777588] usb usb5: Product: UHCI Host Controller
[ 0.777590] usb usb5: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
[ 0.777592] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.777677] hub 5-0:1.0: USB hub found
[ 0.777683] hub 5-0:1.0: 2 ports detected
[ 0.777840] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.780432] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.780439] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.780544] mousedev: PS/2 mouse device common for all mice
[ 0.780674] rtc_cmos 00:02: RTC can wake from S4
[ 0.780778] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.780801] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.780880] device-mapper: uevent: version 1.0.3
[ 0.780940] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 0.780961] platform eisa.0: Probing EISA bus 0
[ 0.780964] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.780966] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.780968] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.780970] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.780973] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.780975] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.780977] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.780979] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.780981] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.780983] platform eisa.0: EISA: Detected 0 cards
[ 0.780990] cpufreq-nforce2: No nForce2 chipset.
[ 0.780994] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.781135] TCP: cubic registered
[ 0.781234] NET: Registered protocol family 10
[ 0.781439] NET: Registered protocol family 17
[ 0.781450] Key type dns_resolver registered
[ 0.781603] Using IPI No-Shortcut mode
[ 0.781682] Loading compiled-in X.509 certificates
[ 0.785112] Loaded X.509 cert 'Magrathea: Glacier signing key: 7acf8ed948d77b6a80f24f59d5d8ed0387aab426'
[ 0.785125] registered taskstats version 1
[ 0.817023] Key type trusted registered
[ 0.833019] Key type encrypted registered
[ 0.848924] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.848928] IMA: No TPM chip found, activating TPM-bypass!
[ 0.849168] regulator-dummy: disabling
[ 0.849212] Magic number: 7:934:732
[ 0.849300] rtc_cmos 00:02: setting system clock to 2015-03-28 11:42:08 UTC (1427542928)
[ 0.849651] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.849653] EDD information not available.
[ 0.849684] PM: Hibernation image not present or could not be loaded.
[ 0.996195] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB02, max UDMA/100
[ 0.996365] ata4.01: ATA-8: Hitachi HDS721050CLA362, JP2OA39C, max UDMA/133
[ 0.996368] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.012193] ata4.00: configured for UDMA/100
[ 1.028281] ata4.01: configured for UDMA/133
[ 1.061155] isapnp: No Plug & Play device found
[ 1.063956] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB02 PQ: 0 ANSI: 5
[ 1.067090] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.067095] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.067268] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.067339] sr 3:0:0:0: Attached scsi generic sg0 type 5
[ 1.069071] scsi 3:0:1:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
[ 1.069179] sd 3:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.069221] sd 3:0:1:0: Attached scsi generic sg1 type 0
[ 1.069244] sd 3:0:1:0: [sda] Write Protect is off
[ 1.069247] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.069274] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.138158] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.138616] sd 3:0:1:0: [sda] Attached SCSI disk
[ 1.138935] Freeing unused kernel memory: 872K (c19b9000 - c1a93000)
[ 1.138976] Write protecting the kernel text: 6544k
[ 1.139059] Write protecting the kernel read-only data: 2768k
[ 1.139060] NX-protecting the kernel data: 5744k
[ 1.154080] systemd-udevd[106]: starting version 204
[ 1.187468] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.187483] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.187710] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.187904] r8169 0000:03:00.0 eth0: RTL8102e at 0xf841e000, 40:61:86:fa:0e:74, XID 04c00000 IRQ 43
[ 1.592053] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 1.680028] tsc: Refined TSC clocksource calibration: 2499.939 MHz
[ 1.791641] usb 2-1: New USB device found, idVendor=1241, idProduct=1177
[ 1.791650] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.806973] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.852089] usbcore: registered new interface driver usbhid
[ 1.852093] usbhid: USB HID core driver
[ 1.856651] input: HID 1241:1177 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
[ 1.856770] hid-generic 0003:1241:1177.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.0-1/input0
[ 2.036049] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.214940] usb 3-1: New USB device found, idVendor=05e3, idProduct=0606
[ 2.214947] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.214951] usb 3-1: Product: USB Hub 2.0
[ 2.214956] usb 3-1: Manufacturer: ALCOR
[ 2.218017] hub 3-1:1.0: USB hub found
[ 2.219946] hub 3-1:1.0: 4 ports detected
[ 2.464041] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[ 2.621947] usb 3-2: New USB device found, idVendor=04f3, idProduct=0103
[ 2.621953] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.638767] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 2.638856] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.1-2/input0
[ 2.662097] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input7
[ 2.662193] hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.1-2/input1
[ 2.680110] Switched to clocksource tsc
[ 3.117951] usb 3-1.1: new full-speed USB device number 4 using uhci_hcd
[ 3.273944] usb 3-1.1: New USB device found, idVendor=0ac8, idProduct=301b
[ 3.273952] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.273956] usb 3-1.1: Product: PC Camera
[ 3.273960] usb 3-1.1: Manufacturer: Z-Star Corp.
[ 3.298733] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.349955] usb 3-1.3: new full-speed USB device number 5 using uhci_hcd
[ 3.359940] random: nonblocking pool is initialized
[ 3.453946] usb 3-1.3: not running at top speed; connect to a high speed hub
[ 3.485946] usb 3-1.3: New USB device found, idVendor=8564, idProduct=1000
[ 3.485954] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.485959] usb 3-1.3: Product: Mass Storage Device
[ 3.485963] usb 3-1.3: Manufacturer: JetFlash
[ 3.485967] usb 3-1.3: SerialNumber: 022011UQ
[ 17.474711] Adding 2094076k swap on /dev/sda6. Priority:-1 extents:1 across:2094076k FS
[ 17.511114] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.599657] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 17.610826] systemd-udevd[353]: starting version 204
[ 17.738635] lp: driver loaded but no devices found
[ 17.753267] ppdev: user-space parallel port driver
[ 17.763872] parport_pc 00:07: reported by Plug and Play ACPI
[ 17.763920] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 17.860194] lp0: using parport0 (interrupt-driven).
[ 17.891507] intel_rng: FWH not detected
[ 17.913756] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 17.913765] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.914373] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 17.942077] [drm] Initialized drm 1.1.0 20060810
[ 17.944166] leds_ss4200: no LED devices found
[ 18.015086] Linux video capture interface: v2.00
[ 18.021310] gspca_main: v2.14.0 registered
[ 18.038227] nvidia: module license 'NVIDIA' taints kernel.
[ 18.038232] Disabling lock debugging due to kernel taint
[ 18.074932] gspca_main: gspca_zc3xx-2.14.0 probing 0ac8:301b
[ 18.077064] usb-storage 3-1.3:1.0: USB Mass Storage device detected
[ 18.094522] scsi4 : usb-storage 3-1.3:1.0
[ 18.094697] usbcore: registered new interface driver usb-storage
[ 18.158119] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 18.187647] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 18.188111] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 18.188121] NVRM: loading NVIDIA UNIX x86 Kernel Module 331.113 Mon Dec 1 20:14:01 PST 2014
[ 18.220264] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 18.271446] SKU: Nid=0x1d sku_cfg=0x4005c603
[ 18.271450] SKU: port_connectivity=0x1
[ 18.271451] SKU: enable_pcbeep=0x0
[ 18.271452] SKU: check_sum=0x00000005
[ 18.271454] SKU: customization=0x000000c6
[ 18.271455] SKU: external_amp=0x0
[ 18.271456] SKU: platform_type=0x0
[ 18.271457] SKU: swap=0x1
[ 18.271458] SKU: override=0x1
[ 18.271734] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 18.271736] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.271738] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 18.271739] mono: mono_out=0x0
[ 18.271740] dig-out=0x1e/0x0
[ 18.271741] inputs:
[ 18.271743] Front Mic=0x19
[ 18.271745] Rear Mic=0x18
[ 18.271746] Line=0x1a
[ 18.271748] realtek: No valid SSID, checking pincfg 0x4005c603 for NID 0x1d
[ 18.271749] realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0888
[ 18.287031] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 18.287167] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 18.287278] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 18.287387] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 18.287507] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 18.288002] hda_intel: Disabling MSI
[ 18.288036] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 18.288071] hda-intel 0000:01:00.1: Disabling 64bit DMA
[ 18.296040] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[ 18.308011] device-mapper: multipath: version 1.6.0 loaded
[ 18.401825] Bluetooth: Core ver 2.17
[ 18.405279] NET: Registered protocol family 31
[ 18.405283] Bluetooth: HCI device and connection manager initialized
[ 18.405293] Bluetooth: HCI socket layer initialized
[ 18.405296] Bluetooth: L2CAP socket layer initialized
[ 18.405307] Bluetooth: SCO socket layer initialized
[ 18.419648] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.419652] Bluetooth: BNEP filters: protocol multicast
[ 18.419660] Bluetooth: BNEP socket layer initialized
[ 18.432912] Bluetooth: RFCOMM TTY layer initialized
[ 18.432926] Bluetooth: RFCOMM socket layer initialized
[ 18.432937] Bluetooth: RFCOMM ver 1.11
[ 18.657837] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 18.801661] init: cups main process (524) killed by HUP signal
[ 18.801678] init: cups main process ended, respawning
[ 18.990018] init: failsafe main process (602) killed by TERM signal
[ 19.097009] scsi 4:0:0:0: Direct-Access JetFlash Transcend 16GB 8.07 PQ: 0 ANSI: 4
[ 19.097359] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 19.107981] sd 4:0:0:0: [sdb] 31358976 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 19.110983] sd 4:0:0:0: [sdb] Write Protect is off
[ 19.110991] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 19.113973] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 19.137995] sdb: sdb1
[ 19.140237] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 19.140326] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 19.140390] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 19.140455] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 19.154994] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 19.265094] input: gspca_zc3xx as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/input/input17
[ 19.265358] usbcore: registered new interface driver gspca_zc3xx
[ 20.421175] r8169 0000:03:00.0 eth0: link down
[ 20.421207] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.421519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.231613] init: samba-ad-dc main process (756) terminated with status 1
[ 22.409148] r8169 0000:03:00.0 eth0: link up
[ 22.409161] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.771168] init: plymouth-upstart-bridge main process ended, respawning
[ 23.077994] init: plymouth-stop pre-start process (1356) terminated with status 1
[ 23.181525] nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
[ 26.979080] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1358.827501] perf samples too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 3931.464104] usb 3-2: USB disconnect, device number 3
[ 3963.333628] usb 3-1.4: new low-speed USB device number 6 using uhci_hcd
[ 3963.453625] usb 3-1.4: New USB device found, idVendor=04f3, idProduct=0103
[ 3963.453633] usb 3-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3963.470227] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.4/3-1.4:1.0/input/input18
[ 3963.470407] hid-generic 0003:04F3:0103.0004: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.1-1.4/input0
[ 3963.493787] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.4/3-1.4:1.1/input/input19
[ 3963.493961] hid-generic 0003:04F3:0103.0005: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.1-1.4/input1
[ 3978.555634] usb 3-1.4: USB disconnect, device number 6
[ 3979.963636] usb 3-1.3: USB disconnect, device number 5
[ 3981.573637] usb 3-1.3: new full-speed USB device number 7 using uhci_hcd
[ 3981.676663] usb 3-1.3: not running at top speed; connect to a high speed hub
[ 3981.708638] usb 3-1.3: New USB device found, idVendor=8564, idProduct=1000
[ 3981.708645] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3981.708650] usb 3-1.3: Product: Mass Storage Device
[ 3981.708654] usb 3-1.3: Manufacturer: JetFlash
[ 3981.708658] usb 3-1.3: SerialNumber: 022011UQ
[ 3981.711719] usb-storage 3-1.3:1.0: USB Mass Storage device detected
[ 3981.711799] scsi5 : usb-storage 3-1.3:1.0
[ 3982.712676] scsi 5:0:0:0: Direct-Access JetFlash Transcend 16GB 8.07 PQ: 0 ANSI: 4
[ 3982.713216] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3982.724680] sd 5:0:0:0: [sdb] 31358976 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 3982.727650] sd 5:0:0:0: [sdb] Write Protect is off
[ 3982.727657] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3982.730653] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3982.754676] sdb: sdb1
[ 3982.771646] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 3984.062691] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3985.408665] usb 3-1.2: new low-speed USB device number 8 using uhci_hcd
[ 3985.529645] usb 3-1.2: New USB device found, idVendor=04f3, idProduct=0103
[ 3985.529652] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3985.546522] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.2/3-1.2:1.0/input/input20
[ 3985.546645] hid-generic 0003:04F3:0103.0006: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.1-1.2/input0
[ 3985.569814] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.2/3-1.2:1.1/input/input21
[ 3985.569928] hid-generic 0003:04F3:0103.0007: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.1-1.2/input1
[ 4175.082240] systemd-hostnamed[2782]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
daccho@daccho-MS-7529 ~ $


lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 007: ID 8564:1000
Bus 003 Device 008: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet K-2024 Multimedia Keyboard
Bus 003 Device 004: ID 0ac8:301b Z-Star Microelectronics Corp. ZC0301 Webcam
Bus 003 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1241:1177 Belkin F8E842-DL Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Za keyboard pise English (US) i cekirani Use the sam layout for all windows

Ova English (Us) je obiljezena a imam ispod i Serbian (Latin) i Serbian