[ danko @ 25.08.2004. 00:45 ] @
Imam veliki problem sa dvd rezacem LiteOn. U pitanju je externi rezac LiteOn LDW411S.Problem sam imao sa prvim rezacem pa sam reklamirao i dodje opet novi takav (neotpakovan)i opet isto.Sad mi se javlja sumnja da je kod mene nesto lose. Pokusao sam na dva kompjutera ali bez uspeha! Kazu mi da ako je Windows nesto zajeban hoce da brlja rezac pogotovu DVD. Evo sta se desava. Ocita disk i kao pocinje da reze i posle nekoliko sekundi (mozda oko 30) napise kod Record State FAILED umesto da napuni baffer. Mislio sam da je problem sa firmwareom pa sam skinuo najnoviji sa proizvodjacevog sajat, ali sve je ostalo bez uspeha. Evo slika error reporta u attachu ako neko zna u cemu je greska neka mi pomaze pod hitno inace cu da odlepim od ovoga! Ovde cu da iskopiram error log fajl pa ako imte neko resenje pomazite!U attachu stavljam sliku prozora kod rezanja! Da napomenem nema veze da li se reze kompilacija ili se radi copy diska i u jednom i drugom slucaju je ista situacija! Citat: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <LITE-ON DVDRW LDW-411S> Version: FS0J - HA 3 TA 0 - 6.3.1.17 Adapter driver: <> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.17 Adapter driver: <d346prt> HA 2 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHS2030AT atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R2312 E: CDRom0 Generic DVD-ROM F: CDRom1 LITE-ON DVDRW LDW-411S G: CDRom11 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 446MB (457712kB) Free physical memory: 256MB (262988kB) Memory in use : 42 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.8.2004 DVD-Copy on the fly 12:58:11 AM #1 Text 0 File Reader.cpp, Line 118 Reader running 12:58:11 AM #2 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW LDW-411S running 12:58:11 AM #3 Text 0 File DVDCopy.cpp, Line 271 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2073838 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) 12:58:11 AM #4 Text 0 File DVDCopy.cpp, Line 374 Max -1 tracks of 1 allowed to copy 1: 0 - 2073838 = 2073838, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 12:58:11 AM #5 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 12:58:11 AM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2073837 (460:51.12, 4050MB) 12:58:11 AM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD DVD) 12:58:11 AM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: LITE-ON DVDRW LDW-411S, Media type: DVD-R Disc Manufacturer: PRINCO - Disc Application Code: 64, Disc Physical Code: 193 12:58:11 AM #9 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:58:11 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2073838 (2073838) = #2073838/460:51.13 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2073838 blocks [LITE-ON DVDRW LDW-411S ] -------------------------------------------------------------- 12:58:11 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [LITE-ON DVDRW LDW-411S ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4247220224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2073838 | lead-out | 1 | 0x00 | 0x41 12:58:11 AM #12 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 2x (2,770 KB/s) 12:58:11 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:58:11 AM #14 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 25:42,280 (1542280ms) -> OK 12:58:12 AM #15 Text 0 File DVDR.cpp, Line 1879 Recording mode: Sequential Recording Mode 12:58:12 AM #16 Text 0 File Mmc.cpp, Line 20401 Set BUFE: supported -> ON , SMART-BURN : ON 12:58:12 AM #17 Text 0 File DVDR.cpp, Line 2020 Start write address at LBA 0 DVD high compatibility mode: Yes 12:58:12 AM #18 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:58:12 AM #19 Text 0 File DVDR.cpp, Line 4645 Drive: LITE-ON DVDRW LDW-411S Book Type request: DVD-ROM Changing the book type was finish with error code: 0 12:58:19 AM #20 Text 0 File Cdrdrv.cpp, Line 1294 00:58:19.302 - LITE-ON DVDRW LDW-411S\H3 T0 : Queue again later 12:58:43 AM #21 SCSI -500 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x09DE3000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:58:43 AM #22 SCSI -1114 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x09870000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 12:58:43 AM #23 CDR -500 File Writer.cpp, Line 304 SCSI command aborted LITE-ON DVDRW LDW-411S\H3 T0 12:58:43 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:58:43 AM #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 12:58:44 AM #26 Text 0 File DVDR.cpp, Line 2256 EndDAO: Last written address was 31 1:05:41 AM #27 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 1:05:41 AM #28 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 1:05:41 AM #29 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 3/26/2003 8:20:16 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 3/12/2004 10:41:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Unapred hvala! |