[ Bilypiton @ 11.04.2005. 21:56 ] @
| Imam problem sa S-video kablom koji je 4-pinski a izlaz sa moje graficke je 7-pinski.Moj drugar ima taj adapter i sa njim radi ali ne mogu da ga nadjem,pa sam nasao na Net-u da bi trebalo bez problema da radi ako samo ubacimo 4-pinski u 7-pinski jel su ova tri preostala pina za neke specijalne kontrolne signale sto nije neobhodno,evo pa procitajte: What if my PC graphics card has a 7-pin S-video connector instead of 4-pin ? The four pin S-video connector as shown above is the standard connector for carrying S-video. Those seven pin connectors seen on some PC graphics cards are non-standard connectors for carrying S-video. The use of the pins on those seven pin connectors is not standardized and can vary from manufacturer to manufacturer. (For some strange reasons some manufacturers in PC industry just keep constanly breaking the industry standars and create lots of confuzion to users when doing so). Generally the four pins on those 7-pin connectors on the same places as the standard four pin S-video connector have practcly always the same fuctionality as those pins in S-video connector. The other three pins can have then some extra signals which are not part of S-video (usually some pins of those carry composite video and some control signals, but the use of those three extra pins vary quite much). So if you encounter 7 pin connector for S-video, then forget the three center pins... just use the four on the standard positions. The circuit shoudl work with those connectors as well. Kod mene to ne sljaka.Imam Ati Radeon 9600 xt |