Umjesto ATPT koristi ATP. (P=Pulse; T=Tone, zajedno vjerovatno prave grešku.)

Nekad bese ATDP, mozda pomogne ...?

Upravo. Stavi ATDP umesto ATPT u kppp konfiguraciji.

Video sam i ja greshku za atdp,pa sam ispravio,ali sada kad treba da pocne da bira broj,BLOKIRA MI KOMP:(((Sta da radim?

Kako si instalirao drajvere? Koji modem imaš? Koja verzija kernela se nalazi
na Fedori 4? Meni ovo liči kao da nemaš drajver uopšte. Ili da je reč o lošem
drajveru, odnosno da ne odgovara tvom modemu.

Skinuo sam neke drivere ltmodem2.6.n.tar.gz,iskompajlirao ih po uputstvu,a imam lucent/agere pci soft modem v.92.kernel na fedori je 2.6.11-1.1369_FC4.Ako mozete da mi nadjete i date tacan link za ovaj modem bio bih vam zahvalan,ako moze u prm paketu,a ako ne onda ok,moze i u tar.gz.Hvala!

Neki Lucent modemi rade u Linuxu, a neki ne! Skini sa
http://linmodems.technion.ac.il skriptu ScanModen.gz. Raspakuj je, u konzoli
otkucaj "chmod +x ./scanModem" i pokreni je sa "./scanModem". Ova sripta će
napraviti direktorijum Modem. Iz tog direktorijuma postavi ovde na forum fajl
ModemData.txt. Stavi ga kao "fajl uz poruku", a ne kao tekst u poruci, jer je
prilično dug.

U tom fajlu će pisati da li je tvoj modem podržan drajverima, i gde oni da se
nađu, ako postoje. Pa ću ga ja pogledati i reći šta dalje. Ako si hrabar
možeš i sam da pokušaš da ga pročitaš :)

Izvinjavam se zbog kashnjenja,ali evo text modemdata.txt...








DO use the following line as the email Subject Line, to alert cogent experts:
scanModem, Fedora Core release 4 (Stentz)
Kernel kernel 2.6.11-1.1369_FC4
Occassionally reponses are blocked by an Internet Provider mail filters.
So do in a day also check the Archived responses at [email protected]
Code updated on: 2005_August_24
------------ -------------- System information ------------------------
Fedora Core release 4 (Stentz)
Kernel
on System with processor: i686
currently under kernel: 2.6.11-1.1369_FC4

There are emerging complications under 2.6.10 and later kernels.
Concerning Intel-536ep and 537
http://www.ubuntulinux.org/wiki/IntelFiveThreeSixEPModemHowto/
http://linmodems.technion.ac.il/archive-fifth/msg00280.html
http://linmodems.technion.ac.il/archive-fifth/msg00881.html


The kernel-2.6.11-1.1369_FC4 was compiled with CONFIG_REGPARM, providing more compact and faster code.

The kernel was assembled with compiler: 4.0.0
with current System compiler GCC=4.0.0

Checking for kernel-headers needed for compiling.
The kernel-headers have base folder:
/lib/modules/2.6.11-1.1369_FC4/build -> ../../../usr/src/kernels/2.6.11-1.1369_FC4-i686
Modem symbolic link is: /dev/modem -> /dev/ttyLT0
Checking for modem symbolic link support lines within /etc/udev/ files

USB modem not detected.

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)

Modem candidates are at PCI_buses: 00:0a.0

Providing detail for device at 00:0a.0
with vendor-ID:device-ID
----:----
Class 0780: 11c1:048c Communication controller: Agere Systems (former Lucent Microelectronics) V.92 56K WinModem (rev 02)
SubSystem 11c1:044c Agere Systems (former Lucent Microelectronics): Unknown device 044c
Flags: bus master, medium devsel, latency 32, IRQ 10

-----PCI_IDs------- --CompilerVer-
Feature List: Primary Subsystem Distr KernelVer kernel default CPU
./scanModem test 11c1:048c 11c1:044c redhat 2.6.11-1.1369_FC4 4.0.0 4.0.0 i686

== Checking PCI IDs through modem chip suppliers ==

Vendor 11c1 corresponds to Lucent Technologies or subsidiary Agere Systems, Inc.
Information is at: http://www.agere.com/client/modem_dsp.html. Produced are both:
1) modems identifiable from their primary PCI IDs and
2) soft modem Subystem chips requiring identification through codec readouts.


Class 0703: 11c1:048c is still NOT supported under Linux, as of 2005_August_24
It is a "software" modem without a digital signal processing (DSP) chipset.
The ltmodem drivers from http://ltmodem.heby.de resources for DSP modems do NOT provide support,
A dialout terminates with "No Carrier" or a Hang if usage of the ltmodem drivers is attempted.


======= PCI_ID checking completed ======
Update=2005_August_24
A PCMCIA CardBus is not detected on this System.

For information on modem port creation under the UDEV device file system see:
http://linmodems.technion.ac.il/archive-fourth/msg03299.html for Conexnant modems
http://linmodems.technion.ac.il/archive-fifth/msg01177.html for Lucent/Agere DSP modems

The following information blocks just query some ppp support items.

====================================================
grep -rs ppp /etc/modprobe.*
-------------------------------------
/etc/modprobe.conf.dist:alias tty-ldisc-3 ppp_async
/etc/modprobe.conf.dist:alias tty-ldisc-14 ppp_synctty
/etc/modprobe.conf.dist:alias ppp-compress-18 ppp_mppe
/etc/modprobe.conf.dist:install ppp-compress-21 /bin/true
/etc/modprobe.conf.dist:alias ppp-compress-24 ppp_deflate
/etc/modprobe.conf.dist:alias ppp-compress-26 ppp_deflate
-------------------------------------
PPP support module bsd_comp.ko not found!
Resident PPP support modules are properly uncompressed .
COMM services are not active

The current modem symbolic link is: /dev/modem -> /dev/ttyLT0
The ports /dev/ttyS0 or 1,2,3 are for standard Controller chip modems


No devfsd.conf file found, indicated absense of the devfsd daemon package
for device file system (devfs) symbolic link support.

DEVFSD=
---- dmesg queries -------
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
ibm_acpi: ec object not found

Beginning with Fedora 2 kernel-2.6.6-1.427, kernel-headers needed
for compiling drivers are provide at: /lib/modules/kernel-version/build/
Thus upgrading above kernel 2.6.5-1.358 to 2.6.6-* is Stongly Recommended

pppd version 2.4.2 may not be fully compatible with 2.6.8 kernel releases.
If an initial CONNECT is achieved without PPP being subsequently established,
drop back to a 2.4.1 version. This has worked for PCTEL AMR modem users,
supported by the http://www.smlink.com slmodem software.
Check pppd version with:
pppd --version
See http://linmodems.technion.ac.il/archive-fourth/msg03167.html


For kernel-version 2.4.20-8 , a failure in automatic loading of PPP related modules
has been reported. It was necessary to manually load with:
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_generic
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_deflate
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_synctty
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_async
or dialout efforts failed.

The Internet Configuration Wizard writes a configuration file:
/etc/wvdial.conf
containing a line default line
Stupid Mode = yes
Better dialup performance may be achieved by commenting out this line as:
# Stupid Mode = yes
If the Smartlink slmodemd is used for port creation, an added line is necessary
Carrier Check = no
Also non-USA Users may need to add to the [Modem0] block:
Init2 = AT+GCI=hexadecimal_country_code
but test without it first.

redhat is not yet providing pre-compiled drivers for WinModems



Pomagajte sada...

Ovaj deo govori o tome koji modem imaš:

Posle toga ide priča o proizvođaču itd...

A zatim sledi presuda...
...koja kaže da
tvoj modem nije podržan drajverima. Žao mi je...

Ima li nekih novina u vezi ovog modema? Alternative... Kopam po net-u vec danima ali... Poz