[ optix @ 16.05.2006. 23:49 ] @
| Imam velikih problema da zamenim sifru na ovom rutercicu. Naime, problem je ulazak u rommon, ne desava se nista slanjem break sekvence (ctrl+break na Hyperterminal-u i SecureCRT-u), ili ja na neki nacin gresim pri njenom unosenju. Ima li neko ideje sta moze da bude? sh ver: Code: Router>sh ver Cisco Internetwork Operating System Software IOS (tm) SOHO71 Software (SOHO71-OY6-M), Version 12.2(4)YH, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Synched to technology version 12.2(7.1)T TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Thu 23-May-02 22:44 by ealyon Image text-base: 0x80013170, data-base: 0x805B66A8 ROM: System Bootstrap, Version 12.2(4r)XM3, RELEASE SOFTWARE (fc1) ROM: SOHO71 Software (SOHO71-OY6-M), Version 12.2(4)YH, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Router uptime is 3 minutes System returned to ROM by power-on System image file is "flash:soho71-oy6-mz.122-4.YH.bin" CISCO SOHO71 (MPC855T) processor (revision 0x502) with 14848K/1536K bytes of memory. Processor board ID FOC072124BH (3280108662), with hardware revision 0000 CPU rev number 0 Bridging software. 2 Ethernet/IEEE 802.3 interface(s) 128K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) 2048K bytes of processor board Web flash (Read/Write) Configuration register is 0x2102 Probao sam sa privremenom promenom baudrate-a kako sugerisu na sajtu, ali opet nista. Ustvari na Cisco sajtu je nekako taj model preskocen iz svih uputstva za password recovery. Hvala unapred. |