Premalo si informacija dao za neki konkretan odgovor. Koje interfejse treba da bridge-ujes, na kojim uredjajima, sta je cilj bridge-ovanja, kako izgleda mreza...?

Pretrazivanjem cisco sajta mozes dosta toga pronaci.

"mala" izmena
situacija se promenila
potrebno je da Cisco876 ruter da ima ATM ip address i da ima LAN ip adress i da rutira video traffic od ethernet port na ATM port preko VLAN do druge strana gde je ista konfiguracija
ne znam dali problem je jer ova model na CISCO ima L2 ethernet porte i ne mogu da dodelim IP adresu na ethernet porte samo na Vlan 1
i kad smo postavili ruter nije rutirao traffic niz ATM,a ATM je bio UP/UP
evo conf:

Current configuration : 889 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname TEST876
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
ip subnet-zero
ip cef
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
ip address 192.168.1.2 255.255.255.0
pvc 1/32
encapsulation aal5snap
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
ip address 10.0.2.254 255.255.255.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 ATM0.1
!
no ip http server
no ip http secure-server
!
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
!
scheduler max-task-time 5000
end

POZDRAV