problem sa zvucnom na debianu

[ time @ 04.12.2006. 16:02 ] @

ploca je asus a7v8x-x i na njo je integrisana zvucna.dok sam koristio ubuntu sve je radilo ok bez ikakvog podesavanja.kada sa ubacio debiana vise neradi.tacnije kada ukljucim xmms vidim da on odradjuje posao ali zvuk ne izlazi na zvunike.kada pokusam da otvorim volume control napise mi "sorry, no mixer elements and/or device found.kako da dodjem do zakljucka u cemu je problem.unapred HVALA!

[ del-boy @ 04.12.2006. 17:18 ] @

Pokreni alsaconf. On bi trebao da ti prepozna zvučnu karticu i podesi konfiguracione fajlove. Posle toga pokreni alsamixer i pojačaj (ili smanji, kako ti već odgovara) zvuk!

[ time @ 04.12.2006. 19:28 ] @

uspeli smo :) e sad ima jos pitanja.kada pokrenem gmix iavi mi "sorry, no mixer elements and/or device found" ali kada pokrenem kmix sve radi ko sat.u cemu moze biti problem?
drugi problem je sto kada pokrenem supertux ide sve super.cim upalim opengl broj frejmova padne na 5.sta li tu moze biti problem?instalirani su kao drajveri za graficku 9600 ali meni tu nesto nestima.
trece pitanje je gde se namesta 16 bita i 32 bita boja desktopa u debianu?mogu da menjam rezoluciju ali boje nema nigde:(

[ del-boy @ 04.12.2006. 22:53 ] @

gmix ne znam šta je (znam, ali ga nikad nisam koristio), pa ne znam zašto ti on ne radi. Usput, šta koristiš KDE ili Gnome?

Što se grafike tiče, koji drajver si instalirao? Ati-jev vlasnički? Ne mogu sad da se setim komande, ali ATI ima neku komandu koju treba da pokreneš posle instalacije drajvera da bi učitao modul i podesio config fajlove. Jesi li to uradio?
Ajde daj ovde izlaz komande glxinfo | grep render da vidimo da li sistem uopšte koristi drajvere. Ja sam se sa ATI-jem dugo zajebavao, ali više ga ne uzimam, mada u zadnje vreme sam čuo da postoje solidni drajveri!

Sve što se tiče grafike (paleta boja, rezolucija, fontova, tastature, miša...) konfiguracioni fajl je /etc/X11/xorg.conf, pa se tu igraj, ali pre nego što kreneš obavezno pročitaj man xorg.conf da ne bi bošao u situaciju da nemaš X!

[ time @ 05.12.2006. 00:33 ] @

evo sta kaze

Citat:

Xlib: extension "XFree86-DRI" missing on display ":0.0".
direct rendering: No
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
OpenGL renderer string: Mesa GLX Indirect

koristim gnome.

[ del-boy @ 06.12.2006. 00:23 ] @

Drajver za grafičku ti nije dobro instaliran ili ti nije podešen /etc/X11/xorg.conf.

Pogledaj koji drajver korisiš. U /etc/X11/xorg.conf vidi da li je drajver fglrx (mislim da se tako zove). I proveri sa lsmod da li je učitan fglrx modul.

[ time @ 06.12.2006. 19:00 ] @

ovako stoje stvari.nemam taj fajl xorg.conf imam slican XF86Config-4 i slican je tom.

Citat:

# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "ati"
EndSection

Section "Monitor"
Identifier "105E"
HorizSync 30-54
VertRefresh 50-120
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "105E"
DefaultDepth 24
#SubSection "Display"
# Depth 1
# Modes "800x600" "640x480" "1024x768"
#EndSubSection
#SubSection "Display"
# Depth 4
# Modes "800x600" "640x480" "1024x768"
#EndSubSection
#SubSection "Display"
# Depth 8
# Modes "800x600" "640x480" "1024x768"
#EndSubSection
#SubSection "Display"
# Depth 15
# Modes "800x600" "640x480" "1024x768"
#EndSubSection
#SubSection "Display"
# Depth 16
# Modes "800x600" "640x480" "1024x768"
#EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

ovo gde pise "Driver "ati"" to ati sam ja dodao.nisam siguran da li to treba.

a lsmod kaze

Citat:

$ lsmod
Module Size Used by
isofs 37752 1
ipv6 262468 10
pcspkr 3688 0
rtc 12728 0
analog 11872 0
floppy 60304 0
parport_pc 36932 0
parport 41544 1 parport_pc
snd_via82xx 29604 2
snd_ac97_codec 69508 1 snd_via82xx
snd_pcm_oss 54376 0
snd_mixer_oss 19904 2 snd_pcm_oss
snd_pcm 97480 2 snd_via82xx,snd_pcm_oss
snd_timer 25668 1 snd_pcm
snd_page_alloc 11720 2 snd_via82xx,snd_pcm
gameport 4736 2 analog,snd_via82xx
snd_mpu401_uart 8000 1 snd_via82xx
snd_rawmidi 25316 1 snd_mpu401_uart
snd_seq_device 8264 1 snd_rawmidi
snd 57380 11 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 10400 2 snd
rt2400 83904 0
hci_usb 14016 0
bluetooth 49284 1 hci_usb
pci_hotplug 34352 0
via_agp 9088 1
agpgart 34536 1 via_agp
ehci_hcd 31364 0
uhci_hcd 32784 0
usbcore 118308 5 hci_usb,ehci_hcd,uhci_hcd
via_rhine 21640 0
mii 5184 1 via_rhine
via_ircc 26448 0
irda 195712 1 via_ircc
crc_ccitt 2176 1 irda
nls_iso8859_1 4096 2
nls_cp437 5760 3
vfat 14656 2
fat 46720 1 vfat
tsdev 7360 0
mousedev 10444 2
evdev 9600 0
capability 4616 0
commoncap 7296 1 capability
psmouse 20232 0
ide_cd 42528 1
cdrom 40284 1 ide_cd
ext3 126760 1
jbd 61848 1 ext3
mbcache 9284 1 ext3
ide_generic 1472 0
via82cxxx 13980 1
ide_disk 19264 5
ide_core 138724 4 ide_cd,ide_generic,via82cxxx,ide_disk
sd_mod 21696 0
ata_piix 8132 0
libata 41412 1 ata_piix
scsi_mod 124812 2 sd_mod,libata
unix 28660 598
font 8448 0
vesafb 6688 0
cfbcopyarea 3840 1 vesafb
cfbimgblt 3072 1 vesafb
cfbfillrect 3712 1 vesafb

kako da znam da li je ucitan modul?

[ dariomk @ 04.01.2007. 19:08 ] @

instaliraj drivere za graficku ako je ati ili nvd pa stimaj sto hoces

[ time @ 04.01.2007. 19:22 ] @

bez sekiracije resio sam problem :) evo reci cu kao sam resio.treba instalirati ati driver fglrx iz source-a.samo tako radi kako valja:)

pozdrav!