[ Pujda @ 18.12.2006. 21:23 ] @
Kao prvo evo ovako nesto sam namestao u sambi i uspeo sam da namestim da mi linux widi windows particiju tj da mi vidi serovane fajlove ali windows ne vidi njega imam samo 2 racunara u mrez preko crossover kabla i evo mojeg samba configa pa vidite sta ne valja i zasto windows ner vidi moj komp a ako moze bilo bi dobro da mi neko posalje svoj samba config ako ima isto mrezu linux-XP adrese su mi linux 192.168.0.1 a winXP profesional sp2 je 192.168.0.2 a maske su 255.255.255.0




# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba HOWTO Collection.
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name, eg: LINUX2
workgroup = moja

# server string is the equivalent of the NT Description field
server string = Samba Server

# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the HOWTO Collection for details.
security = share

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.0 127.0

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes

# you may wish to override the location of the printcap file
; printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba.%m

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>

# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM

# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m

# Most people will find that this option gives better performance.
# See the chapter 'Samba performance issues' in the Samba HOWTO Collection
# and the manual pages for details.
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
restrict anonymous = no
domain master = no
preferred master = no
max protocol = NT
acl compatibility = winnt
ldap ssl = No
server signing = Auto

# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g


#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
read only = no

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
printable = yes

[Unnamed]
case sensitive = no
strict locking = no
msdfs proxy = no
path = /root/Slackbook-one-file

[Unnamed2]
case sensitive = no
strict locking = no
guest ok = yes
msdfs proxy = no
hosts allow = 192.168.0.2
path = /root/MB Soft VP 0111

[shared]
case sensitive = no
strict locking = no
guest ok = yes
msdfs proxy = no
hosts allow = 192.168.0.2
path = /root/Slackbook-one-file/basic-network-commands
[ Pujda @ 21.12.2006. 16:53 ] @
Da li neko zna sta je problem kod ovog samba-sonfig fajla?
Odnosno zasto me windows ne vidi?
I da li neko moze da mi posalje svoj samba config ako ima umrezena 2 racunara tj jedan sa windowsom i jedan sa liuxsom?
[ skijash @ 23.12.2006. 00:07 ] @
Code:

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors. 
#
#======================= Global Settings =====================================
[global]

# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = Rusanj

# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname
;  netbios name = SERVER

# server string is the equivalent of the NT Description field
   server string = Let`s Samba (%v)

# Message command is run by samba when a "popup" message is sent to it.
# The example below is for use with LinPopUp:
; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s

# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   printcap name = cups
;s   load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
   printing = cups

# Samba 3.x supports the Windows NT-style point-and-print feature. To
# use this, you need to be able to upload print drivers to the samba
# server. The printer admins (or root) may install drivers onto samba.
# Note that this feature uses the print$ share, so you will need to 
# enable it below.
# printer admin = @<group> <user>
;s   printer admin = @adm
# This should work well for winbind:
;   printer admin = @"Domain Admins"

# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Set the log (verbosity) level (0 <= log level <= 10)
 log level = 2

# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
# not work for all the hosts in your network.
;   hosts allow = 192.168.1. 192.168.2. 127.
    
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = local_user
# Allow users to map to guest:
  map to guest = bad user

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = share
# Use password server option only with security = server or security = domain
# When using security = domain, you should use password server = *
;   password server = <NT-Server-Name>
;   password server = *

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8
;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
# Encrypted passwords are required for any use of samba in a Windows NT domain
# The smbpasswd file is only required by a server doing authentication, thus
# members of a domain do not need one.
  encrypt passwords = yes

# The following are needed to allow password changing from Windows to
# also update the Linux system password.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
# You either need to setup a passwd program and passwd chat, or
# enable pam password change
;  pam password change = yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *Re*ype*new*UNIX*password* %n\n \
;*passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Options for using winbind. Winbind allows you to do all account and
# authentication from a Windows or samba domain controller, creating
# accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's 
# and gid's. idmap uid and idmap gid are the only required parameters.
#
# winbind separator is the character a user must use between their domain
# name and username, defaults to "\"
;  winbind separator = +
#
# winbind use default domain allows you to have winbind return usernames
# in the form user instead of DOMAIN+user for the domain listed in the
# workgroup parameter.
;  winbind use default domain = yes
#
# template homedir determines the home directory for winbind users, with 
# %D expanding to their domain name and %U expanding to their username:
;  template homedir = /home/%D/%U

# When using winbind, you may want to have samba create home directories
# on the fly for authenticated users. Ensure that /etc/pam.d/samba is
# using 'service=system-auth-winbind' in pam_stack modules, and then
# enable obedience of pam restrictions below:
;  obey pam restrictions = yes

#
# template shell determines the shell users authenticated by winbind get
;  template shell = /bin/bash

# 5. Browser Control and Networking Options:
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#       a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# 6. Domain Control Options:
# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations or Primary Domain Controller for WinNT and Win2k
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roaming profiles for WinNT and Win2k
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Where to store roaming profiles for Win9x. Be careful with this as it also
# impacts where Win2k finds it's /HOME share
; logon home = \\%L\%U\.profile


# The add user script is used by a domain member to add local user accounts
# that have been authenticated by the domain controller, or when adding
# users via the Windows NT Tools (ie User Manager for Domains).

# Scripts for file (passwd, smbpasswd) backend:
; add user script = /usr/sbin/useradd -s /bin/false '%u'
; delete user script = /usr/sbin/userdel '%s'
; add user to group script = /usr/bin/gpasswd -a '%u' '%g'
; delete user from group script = /usr/bin/gpasswd -d '%u' '%g'
; set primary group script = /usr/sbin/usermod -g '%g' '%u'
; add group script = /usr/sbin/groupadd %g && getent group '%g'|awk -F: '{print $3}'
; delete group script = /usr/sbin/groupdel '%g'

# Scripts for LDAP backend (assumes nss_ldap is in use on the domain controller.
# Needs IDEALX scripts, and configuration in smbldap_conf.pm.
# This assumes you've installed the IDEALX scripts into /usr/share/samba/scripts...
; add user script = /usr/share/samba/scripts/smbldap-useradd.pl '%u'
; delete user script = /usr/share/samba/scripts/smbldap-userdel.pl '%u'
; add user to group script = /usr/share/samba/scripts/smbldap-groupmod.pl -m '%u' '%g'
; delete user from group script = /usr/share/samba/scripts/smbldap-groupmod.pl -x '%u' '%g'
; set primary group script = /usr/share/samba/scripts/smbldap-usermod.pl -g '%g' '%u'
; add group script = /usr/share/samba/scripts/smbldap-groupadd.pl '%g' && /usr/share/samba/scripts/smbldap-groupshow.pl %g|awk '/^gidNumber:/ {print $2}'
; delete group script = /usr/share/samba/scripts/smbldap-userdel.pl '%g'


# The add machine script is use by a samba server configured as a domain
# controller to add local machine accounts when adding machines to the domain.
# The script must work from the command line when replacing the macros,
# or the operation will fail. Check that groups exist if forcing a group.
# Script for domain controller for adding machines:
; add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false -M '%u'
# Script for domain controller with LDAP backend for adding machines (You need
# the IDEALX scripts, and to configure the smbldap_conf.pm first):
; add machine script = /usr/share/samba/scripts/smbldap-useradd.pl -w -d /dev/null -g machines -c 'Machine Account' -s /bin/false '%u'

# Domain groups:
# Domain groups are now configured by using the 'net groupmap' tool

# Samba Password Database configuration:
# Samba now has runtime-configurable password database backends. Multiple
# passdb backends may be used, but users will only be added to the first one
# Default:
; passdb backend = smbpasswd guest
# TDB backen with fallback to smbpasswd and guest
; passdb backend = tdbsam smbpasswd guest
# LDAP with fallback to smbpasswd guest
# Enable SSL by using an ldaps url, or enable tls with 'ldap ssl' below.
; passdb backend = ldapsam:ldaps://ldap.mydomain.com smbpasswd guest
# Use the samba2 LDAP schema:
; passdb backend = ldapsam_compat:ldaps://ldap.mydomain.com smbpasswd guest

# idmap uid account range:
# This is a range of unix user-id's that samba will map non-unix RIDs to,
# such as when using Winbind
; idmap uid = 10000-20000
; idmap gid = 10000-20000
  
# LDAP configuration for Domain Controlling:
# The account (dn) that samba uses to access the LDAP server
# This account needs to have write access to the LDAP tree
# You will need to give samba the password for this dn, by 
# running 'smbpasswd -w mypassword'
; ldap admin dn = cn=root,dc=mydomain,dc=com
; ldap ssl = start_tls
# start_tls should run on 389, but samba defaults incorrectly to 636
; ldap port = 389
; ldap suffix = dc=mydomain,dc=com
; ldap server = ldap.mydomain.com
# Seperate suffixes are available for machines, users, groups, and idmap, if 
# ldap suffix appears first, it is appended to the specific suffix.
# Example for a unix-ish directory layout:
; ldap machine suffix = ou=Hosts
; ldap user suffix = ou=People
; ldap group suffix = ou=Group
; ldap idmap suffix = ou=Idmap
# Example for AD-ish layout:
; ldap machine suffix = cn=Computers
; ldap user suffix = cn=Users
; ldap group suffix = cn=Groups
; ldap idmap suffix = cn=Idmap


# 7. Name Resolution Options:
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#       Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z
wins server = 192.168.95.17

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Czech), 861 (???), 932 (Japanese),
# 936 (Simplified Chin.), 949 (Korean Hangul),
# 950 (Trad. Chin.).
# More detail about code page is in
# "http://www.microsoft.com/globaldev/reference/oslocversion.mspx"
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
;   dos charset = 850
;   unix charset = ISO8859-1


#============================ Share Definitions ==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes
# You can enable VFS recycle bin on a per share basis:
# Uncomment the next 2 lines (make sure you create a
# .recycle folder in the base of the share and ensure
# all users will have write access to it. See
# examples/VFS/recycle/REAME in the samba docs for details
;   vfs object = /usr/lib/samba/vfs/recycle.so

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /var/lib/samba/netlogon
;   guest ok = yes
;   writable = no

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /var/lib/samba/profiles
;    browseable = no
;    guest ok = yes
# This script can be enabled to create profile directories on the fly
# You may want to turn off guest acces if you enable this, as it
# hasn't been thoroughly tested.
;root preexec = PROFILE=/var/lib/samba/profiles/%u; if [ ! -e $PROFILE ]; \
;                then mkdir -pm700 $PROFILE; chown %u:%g $PROFILE;fi

# NOTE: If you have a CUPS print system there is no need to 
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you have
# to swap the 'print command' line below with the commented one.
[printers]
;   comment = All Printers
;   path = /var/spool/samba
;   browseable = no
# to allow user 'guest account' to print.
;   guest ok = no
;   writable = no
;   printable = yes
;   create mode = 0700
# =====================================
# print command: see above for details.
# =====================================
   print command = lpr-cups -P %p -o raw %s -r   # using client side printer drivers.
;   print command = lpr-cups -P %p %s # using cups own drivers (use generic PostScript on clients).
# The following two commands are the samba defaults for printing=cups
# change them only if you need different options:
;   lpq command = lpq -P %p
;   lprm command = cancel %p-%j

# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write access
# to the directory and share definition to be able to upload the drivers.
# For more information on this, please see the Printing Support Section of
# /usr/share/doc/samba-<version>/Samba-HOWTO-Collection.pdf 
[print$]
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   write list = @adm root
   guest ok = no

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba/public
;   public = yes
;   writable = no
;   write list = @staff
# Audited directory through experimental VFS audit.so module:
# Uncomment next line.
;   vfs object = /usr/lib/samba/vfs/audit.so

# Other examples. 
#
# A private printer, usable only by Fred. Spool data will be placed in Fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
[skijashsprn]
   comment = skijash's Printer
   valid users = skijash
   path = /home/skijash
   printer = freds_printer
   public = no
   writable = no
   printable = yes

# A private directory, usable only by Fred. Note that Fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765


#dodato - share
[public_dir]
        comment = shared
        path = /mnt/hd/public
        guest ok = yes
        browseable = yes
    writable = yes
    
[private_dir]
    comment = private
    path = /mnt/hd/private
    guest ok = no
    browseable = yes
    writable = yes
    valid users = skijash 
[ Pujda @ 28.12.2006. 08:32 ] @
Hvala na fajlu