Ja kada sam instalirao Mandrake Linux 9.0 instalirao sam i LILO (jer sam imao instaliran WinXP na drugoj particiji) i imao sam opciju da biram koji ce mi sistem biti default. Ne znam kako to izgleda na SUSE Linuxu jer ga nikada nisam koristio, ali siguran sam da ima opcija koja prebacuje default system. Samo je potrazi.

Pozdrav

U /etc/lilo.conf stavi da ti default bude windows i nakon toga ponovo instaliraj lilo.

# lilo -v

Naravno pretpostavka je da imas lilo instaliran jer on dolazi po defaultu sa vecinom distribucija.

Pa otvori sa nekim editorem fajl /etc/lilo.conf i tu podesi sta je potrebno. Posle snimi, otvori konzolu i ukucaj lilo i to je to.

He he :) Caiser, za malo si me pretekao.. Izgleda da smo u isto vreme kucali odgovor...

Ne znam kakav je LILO u SUSE-tu, ali koliko se secam u Mandrake-u imas u lilo.conf red

Ako (Kao recimo kod mene na Slacku 9.0, to je lilo 22.4.1) nemas ovaj red, onda samo stavi da ti Windows sekcija bude pre Linux-a. Evo ti i deo mog lilo.conf-a:

Kada editujes kucaj komandu lilo i trebalo bi da ti ispise izmedju ostalog:

Added Windows* -ova zvezdica znaci da ti je to default sistem
Added Linux

Jednostavno
#lilo -D windows (ili kako ti vec glasi label)

Samo ako mi neko moze pomoci i reci sta da prepravim kako bi mi pri startanju windows bio defaultni, a i sta bi trebao obrisati tako da mi pise pri podizanju samo

Linux ubuntu
windows

evo sta dobijem kada kucam

sudo gedit /etc/grub/menu.lst

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 20

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=a62c6453-0c5a-4e42-9cec-0716a68ae3c2 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,7)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 7.10, kernel 2.6.22-15-generic
root (hd0,7)
kernel /boot/vmlinuz-2.6.22-15-generic root=UUID=a62c6453-0c5a-4e42-9cec-0716a68ae3c2 ro quiet splash
initrd /boot/initrd.img-2.6.22-15-generic
quiet

title Ubuntu 7.10, kernel 2.6.22-15-generic (recovery mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.22-15-generic root=UUID=a62c6453-0c5a-4e42-9cec-0716a68ae3c2 ro single
initrd /boot/initrd.img-2.6.22-15-generic

title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,7)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=a62c6453-0c5a-4e42-9cec-0716a68ae3c2 ro quiet splash
initrd /boot/initrd.img-2.6.22-14-generic
quiet

title Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=a62c6453-0c5a-4e42-9cec-0716a68ae3c2 ro single
initrd /boot/initrd.img-2.6.22-14-generic

title Ubuntu 7.10, memtest86+
root (hd0,7)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1

kad sve promjenim sto trebam idem samo na save i to bi trebalo biti to???

Kao prvo po defaultu suse koristi grub.
a u yastu imas system-boot loader i tamo namestis koji hoces default da ti bude.

za Ubuntu - instalirati program startupmanager:

sudo apt-get install startupmanager

Postle toga, startovati ga iz System --> Admninistration --> Start-Up Manager

Dalje, iz njega je sve jasno, GUI je prilicno jasan.

Ubuntu koristi GRUB (po defaultu)

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0


Promeni default 0 u default 5 i sacuvaj...

Taj program postoji i u Gentoo-u

emerge -a startupmanager

Mada šta je teško sa Midnight Commander-om otići u /boot/grub i otvoriti grub.conf,
pa sa F3 markirati šta hoćete da kopirate i sa F5 kopirate i podesite.

Pa kažete posle

grub-install /dev/vaš-disk-sa-boot-particijom

Da bi Windows (Digimon) bio prvi u listi (default), treba ga staviti na prvo mesto u konfiguraciji grub-a.

nema potrebe za to covek je pitao za suse i yast sasvim lepo odradjuje taj posao