calexx: Programi te namene uglavnom imaju opciju pravljenja butabilnog flopija kojim se startuje program a posle od toga možeš da napraviš i butabilni DVD.

pisac_1: Kontam ja to kolega, al moj komp nema flopija, obzirom da je kod novijih masina flopi izbacen. E sad, ne mogu da vjerujem da doticne aplikacije, novijeg datuma, nisu uzele u obzir da se flopi zaobilazi i u tom smislu predvidjele alternativu DVD-a?

Acronis Bootable Rescue Media can be created in the following formats:

* Floppy Disk
* CD-R/RW
* USB Flash Devices
* .ISO File

calexx: Nadam se da neće da ti bude teško da na http://www.acronis.com/enterpr.../2007/03-15-boot-loader-2.html pročitaš detaljno a kad malo razmislim, verovatno sve to postoji u programu. Inače tebi nije dovoljan samo butabilni disk već i da može da iskoristi taj backup. Sistem možeš da startuješ na mnogo načina ali to ne vredi ako nema samog programa da uradi restore.

Shomy#1: Prvo, imas opciju za pravljenje CD-a, (zove se Rescue disc ili tako nesto, kuci koristim taj program pa ne mogu da proverim) on ti sluzi da butujes sa njega Acronis aplikaciju, kada je podignes izgleda kao i instalirana verzija.
Drugo, sada iz nje radis backup i biras lokaciju sa bekapovanim materijalom, ako su to 2 DVD-a koje je Acronis napravio, ubacis jedan pa drugi i gotovo!
Nije mi jasno zasto ti je toliki backup fajl? Sta pokusavas da sacuvas?
Ja imam backup koji ne prelazi 4 GB a svi potrebni programi su instalirani!
Pozdrav

calexx: Nisam mislio da na disku bude i backup, čak to nije ni mnogo važno, bitno je da imaš butabilan disk kojim startuješ sistem i sam program kojim ćeš da otvoriš backup i uradiš restore. Ja bih recimo iskoristio MiniPE i neki od programa te namene koji je već na njemu a sam backup bih iskopirao na slobodnu particiju. Da li si pogledao onaj link koji sam ostavio? Nisam mnogo čitao ali pretpostavljam da je ono uputstvo kako da se napravi butabilni CD/fleš/image sa spremljenim Acronis programom. Iskoristiš ovo poslednje, napraviš butabilni DVD sa programom pa ubaciš i backup. RTFM. ;)

Koristio sam ''Create bootable Rescue disc '' i on mi samo napravi butabilan CD/DVD, bez mogucnosti da odmah stavim i backup na doticni DVD.

zoran_dojkic: 1. Ubaciš taj Acronis butabilni disk, restartuješ. Kada krene Acronis, izvadiš CD, ubaciš DVD sa snimkom particije, kada prekopira prvi, traži ti drugi... jel' treba da se crta ili šta.
2. Napraviš butabilne diskove sa Norton Ghost 2003 i imaš to što Acronis ne može.
3. Sve to može Hiren's i koristi njega i ne davi više.

The boot CD from which you loaded the program does not keep you from using other CDs with backups. Acronis True Image Home is loaded entirely into RAM, so you can remove the bootable CD to insert the archive disk.

How to create a CD/DVD based image of your hard drive with Acronis True Image



I was digging around on the Acronis website and couldn't find what I wanted. Acronis has the ability to write the image to a CD/DVD if you have UDF packet writing support (Nero InCD or the like). But that CD/DVD isn't bootable. I wanted a bootable CD/DVD with the image of my hard drive on it. That way, if I had to replace the hard drive in my computer, I could simply pop in the CD/DVD and be back to everything exactly the way I wanted it.


Foreword
If you are going to be creating your backup image on CD-R's, follow the blue text. If you're going to use DVD-R's, follow the green text.

What you'll need
Acronis True Image
UltraISO (Or other image editing software)
CD/DVD Burning software (if your image editing software doesn't support burning)
Free space on your hard drive equal in size to your hard drive image
Some blank media (CD-RW, DVD-RW recommended)
Some time (30mins-1hr)
How-to
Open Acronis True Image
Create image of the partition you want to back up (most likely your system partition) and save it to a location on your hard drive. Select Maximum Compression to ensure that the image fits on the disc. Let's call it C:\Backup.tib. Acronis will complain that it's not safe... blah blah blah.
At the Image Archiving Splitting screen, select Fixed Size. In the box enter 650MB/4GB
Grab a cup of coffee or a beer or something... come back 10-20 mins later
Click on Create Bootable Rescue Media. Insert blank CD-R/RW (do not remove after CD is created)
Exit Acronis True Image
Open UltraISO
Go to Tools->Make CD/DVD Image. Let's save this as C:\Acronis.iso
Browse to C:\Acronis.iso and open it
Right click on the Recovery Manager folder and select Hide/Unhide
Rename the CD Label to ACRONIS
Drag the BackupX.tib file to the upper panel to add it to the image (where X is the highest number)
Save this as Acronis_backup0.iso
Create a new image. Repeat the above 3 steps, each time using a different Image archive file and saving to a new .iso file. Name each .iso file with the corresponding number of the .tib file it contains
Burn all of the ISO files with your favorite CD burning program (or UltraISO). Be sure to label them in the order that they have the image archives. I call the CD/DVD with the bootloader Disc0, and then each disc with the number of the archive file that's on it.
To restore the image
Insert Disc 0 into your optical drive and set your BIOS to boot from this drive
Boot into Acronis True Image (full version)
Click on Restore Image
When asked to select the Image Archive, browse to the CD/DVD drive and select BackupX.tib (X=some number)
Continue through the menus, until you get to press the Proceed Button. Take out Disc0 and insert Disc1. Click Proceed.
When Acronis needs the next volume, it will give you an error about opening the file. Simply enter the CD/DVD with the corresponding image that it's asking for and click "Retry". When it asks for the last Volume, insert Disc0.
You're done!
Final Notes

I would recommend uninstalling games before creating the image. Most games today are very large and would cause the image to be too large for even a dual-layer DVD. It would probably be best if you install all your core programs, configure them to your needs, and then follow the guide. You do not need to worry about disabling your pagefile or the hibernation file (if you use them), as Acronis will automatically detect them and not include the data within them in the image.

I keep all my documents and files on other partitions, so my system drive contains only Windows and my programs. With all the programs that I use (Acrobat, Photoshop, Office, MathCad... not "small" by any means), my system partition on my laptop is just over 5GB (without pagefile or hibernation file - those are excluded by Acronis in the image). The image (max compression) took about 20 minutes to create and came out at 2.7GB. This will easily fit on a single-layer DVD, and for those of us with more programs or files, there are always dual-layer DVDs.

Obviously, if your image fits onto one CD/DVD, then great. Just drop it into the ISO and you're done.


Some comparison

I created a VM with a vanilla XP install to test all this out. All of my images were run from my 24x CD-RW/DVD drive, so there's no unfair advantage of being run from the hard drive. I used Acronis True Image 8.0.912 and UltraISO 7.6.2 to follow the guide.

The image created by Acronis came out to 458MB.
With the Acronis bootloader, it's 480MB.
The XP CD that I used to install XP was 576MB, created with nLite, all hotfixes integrated and cab files set to high compression.

To restore the image took 5 minutes. To install took about 20 minutes.

.LoG:
I would recommend uninstalling games before creating the image.
I keep all my documents and files on other partitions, so my system drive contains only Windows and my programs.

znaci nema opcije da startujem backup sa cd-a?!

When asked to select the Image Archive, browse to the CD/DVD drive and select BackupX.tib

jesi probao ovo iz gornjeg posta:
Citat:
When asked to select the Image Archive, browse to the CD/DVD drive and select BackupX.tib

Miroslav Jeftić: Može da se podeli bekap na više CD-ova (ima opcija), naravno, ne može stati cela particija na jedan CD. :P