|
|
[ Ve$eli @ 27.11.2007. 19:42 ] @
|
| Pitanje je naravno, gde je problem?
Da ne bi mnogo objasnjavao sta i kako postavicu vise outputa. Ako bude trebalo jos nesto, recite.
Code:
router#sh ru
Current configuration : 1502 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable password 7 1511021F0725
!
no aaa new-model
!
resource policy
!
no ip dhcp use vrf connected
!
ip dhcp pool PCLAN
import all
network 192.168.0.0 255.255.255.0
default-router 192.168.0.99
!
!
ip cef
!
!
!
!
!
!
!
!
interface Ethernet0
ip address 192.168.0.99 255.255.255.0
ip nat inside
ip virtual-reassembly
hold-queue 100 out
!
interface Ethernet2
no ip address
shutdown
hold-queue 100 out
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
pvc 8/35
pppoe-client dial-pool-number 1
!
!
interface FastEthernet1
duplex auto
speed auto
!
interface FastEthernet2
duplex auto
speed auto
!
interface FastEthernet3
duplex auto
speed auto
!
interface FastEthernet4
duplex auto
speed auto
!
interface Dialer0
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username xxxxx@beotel password 7 xxxxxxxxxxxxxx
!
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
no ip http secure-server
ip dns server
!
ip nat inside source list 100 interface Dialer0 overload
!
access-list 100 permit ip 192.168.0.0 0.0.0.255 any
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
password 7 1511021F0725
login
!
scheduler max-task-time 5000
end
Code:
Router#sh ip int brief
Interface IP-Address OK? Method Status Prot
ocol
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
FastEthernet4 unassigned YES unset down down
Ethernet0 192.168.0.99 YES NVRAM down down
ATM0 unassigned YES manual up up
Ethernet2 unassigned YES NVRAM administratively down down
NVI0 unassigned NO unset up up
Dialer0 10.16.9.240 YES IPCP up up
Virtual-Access1 unassigned YES unset up up
Router# Code:
Router#sh dsl int atm0
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.1 (G.DMT)
!... Code:
Router#sh ip route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
10.0.0.0/32 is subnetted, 1 subnets
C 10.16.9.240 is directly connected, Dialer0
194.106.184.0/32 is subnetted, 1 subnets
C 194.106.184.1 is directly connected, Dialer0
S* 0.0.0.0/0 is directly connected, Dialer0
Router# Code:
Router#ping
Protocol [ip]: atm
ATM Interface: atm0
VPI value [0]: 8
VCI value [1]: 35
Loopback - End(0), Segment(1) [0]: 1
Repeat Count [5]:
Timeout [2]:
Type escape sequence to abort.
Sending 5, 53-byte segment OAM echoes, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Router#
Code:
Router#ping www.google.com
Translating "www.google.com"...domain server (255.255.255.255)
% Unrecognized host or address, or protocol not running.
Router# |
[ optix @ 27.11.2007. 20:08 ] @
Code:
!
vpdn enable
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
interface ATM0
pvc8/35
encapsulation aal5snap
!
Bez aal5snap ce mozda i da prodje, ali bez vpdn-a tesko 
P.S. salji end-loopback atm ping, seg takodje (kod nas) ne prolazi. [ Ve$eli @ 27.11.2007. 20:28 ] @
Kucao sam ovo
Code:
Router>en
Password:
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#vpdn enable
Router(config)#vpdn-group pppoe
Router(config-vpdn)#re
Router(config-vpdn)#request-dialin
Router(config-vpdn-req-in)#protocol pppoe
Router(config-vpdn-req-in)#exit
Router(config-vpdn)#exit
Router(config)#int atm0
Router(config-if)#pvc 8/35
Router(config-if-atm-vc)#encapsulation aal5snap
Router(config-if-atm-vc)#end
Router#
Isti djavo :-).
Pokusavao sam ja i ranije sa vpdn, ali sam procitao da je posle verzije 12.2.(13) i kasnije pppoe klijent funkcionalnost odvojena od vpdn funkcionalnosti, pa se drugacije konfigurise, kao sto je to ovde slucaj.
Edit: Probao sam i da promenim extended ping kao sto si rekao i opet nece. [ markom @ 27.11.2007. 20:35 ] @
Jel' možeš da pinguješ IP adresu druge strane PPP linka?
Router(config)#access-list 101 permit icmp any any
Router(config)#end
Router#debug ip packet 101
Takođe, debug pppoe events ako ne radi ono iznad. (mislim da je events, pišem napamet...)
Inače, da bi pingovao google.com, moraš da definišeš name server, a čini mi se da ga nemaš definisanog... [ optix @ 27.11.2007. 20:43 ] @
Jest, nisam odmah ni primetio da je 12.4...
Sta kaze za sh pppoe session?
A i, ko sto rece Marko, dodaj neki dns server  [ Ve$eli @ 27.11.2007. 21:04 ] @
Ping na 194.106.184.1 prolazi.
Evo malo debug ip packet 100 outputa koji sam uspeo da uhvatim:
Code:
ping 194.106.184.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 194.106.184.1, timeout is 2 seconds:
!
*Mar 1 17:36:56.690: IP: tableid=0, s=10.16.11.125 (local), d=194.106.184.1 (Di
aler0), routed via FIB
*Mar 1 17:36:56.690: IP: s=10.16.11.125 (local), d=194.106.184.1 (Dialer0), len
100, sending
*Mar 1 17:36:56.722: IP: tableid=0, s=194.106.184.1 (Dialer0), d=10.16.11.125 (
Dialer0), routed via RIB
*Mar 1 17:36:56.726: IP: s=194.106.184.1 (Dialer0), d=10.16.11.125 (Dialer0), l
en 100, rcvd 3
*Mar 1 17:36:56.726: IP: tableid=0, s=10.16.11.125 (local), d=194.106.184.1 (Di
aler0), routed via FIB
*Mar. 1 17:36:56.726: IP: s=10.16.11.125 (local), d=194.106.184.1 (Dialer0), le
n 100, sending
*Mar 1 17:36:58.726: IP: tableid=0, s=10.16.11.125 (local), d=194.106.184.1 (Di
aler0), routed via FIB
*Mar 1 17:36:58.726: IP: s=10.16.11.125 (local), d=194.106.184.1 (Dialer0), len
100, sending.!!
Success rate is 60 percent (3/5), round-trip min/avg/max = 36/37/40 ms
Router#
Ovaj ping nije imao mnogo srece, obicno je 100% procenat uspesnosti, ali mi output nije zbrisao :-)
[ Ve$eli @ 27.11.2007. 21:18 ] @
Code:
Router#sh pppoe session
1 client session
Uniq ID PPPoE RemMAC Port VT VA State
SID LocMAC VA-st
N/A 2572 0030.8822.ef3e ATM0 Di0 Vi1 N/A
0019.2fb8.1e57 VC: 8/35 UP
Router#
Code:
Router#PPPoE protocol events debugging is on
Router#ping www.google.com
Translating "www.google.com"...domain server (255.255.255.255)
*Mar 1 18:00:20.717: IP: s=192.168.0.99 (local), d=255.255.255.255 (Ethernet0),
len 60, sending broad/multicast
*Mar 1 18:00:20.717: IP: s=192.168.0.99 (local), d=255.255.255.255 (NVI0), len
60, sending broad/multicast
*Mar 1 18:00:20.717: IP: s=192.168.0.99 (local), d=255.255.255.255 (NVI0), len
60, encapsulation failed
*Mar 1 18:00:23.721: IP: s=192.168.0.99 (local), d=255.255.255.255 (Ethernet0),
len 60, sending broad/multicast
*Mar 1 18:00:23.721: IP: s=192.168.0.99 (local), d=255.255.255.255 (NVI0), len
60, sending broad/multicast
*Mar 1 18:00:23.725: IP: s=192.168.0.99 (local), d=255.255.255.255 (NVI0), len
60, encapsulation failed
*Mar 1 18:00:26.725: IP: s=192.168.0.99 (local), d=255.255.255.255 (Ethernet0),
len 60, sending broad/multicast
*Mar 1 18:00:26.729: IP: s=192.168.0.99 (local), d=255.255.255.255 (NVI0), len
60, sending broad/multicast
*Mar 1 18:00:26.729: IP: s=192.168.0.99 (local), d=255.255.255.255 (NVI0), len
60, encapsulation failed
% Unrecognized host or address, or protocol not running.
Router#
Hm, zar ne bi trebalo agregacioni ruter (druga strana dialer-a) da zna gde je DNS server?
Sad cu probati da stavim neki od ovih servera da vidim sta se desava
hxxp://dialup.beotel.net/english/podrska.php.
[ optix @ 27.11.2007. 21:31 ] @
Pa on verovatno zna, ali se ta informacija ne salje IPCP-om, tako da moras rucno da ih uneses.
sh ip name mada se jasno vidi i iz ping output-a.
Na kraju, debug ppp negotiation pa pogledaj sta sve kaze pod IPCP kad resetujes interfejs...
[ Ve$eli @ 27.11.2007. 21:52 ] @
Ping na www.google.com proradio posle unosenja name servera!
Hvala svima,
Veselin
Copyright (C) 2001-2025 by www.elitesecurity.org. All rights reserved.
|