[ gille @ 05.03.2010. 16:44 ] @
Pozdrav, kupio ssam dell inspirion1011 i dobio ubuntu. Pošto sam početnik i ne razumem se u Kde ili Gnome okruženja, interesuje me da li i kako da zamenim gnome sa kde? Da li mogu da istovremeno imam i kde i gnome pa da po potrebi menjam?
Izvinjavam se ako sam pitao neku glupost jer sam baš laik po pitanju linuxa.
[ component @ 05.03.2010. 17:55 ] @
Nisi pitao nikakvu glupost. Možeš imati i KDE i GNOME paralelno (pri logovanju ćeš moći da izabereš koji želiš da se startuje). Bez obzira da li je neki program KDE ili GNOME radiće u oba okruženja. Ja sam koristio GNOME godinu dana, pa sam instalirao KDE. Paralelno sam imao oba jedno vreme i zaključio sam da mi se KDE više sviđa i uklonio sam GNOME i ostao samo sa KDE.
Dakle nemaš problema samo vozi
[ maksvel @ 05.03.2010. 17:58 ] @
Izbor okruženja je subjektivna stvar - meni je gnome nekako čistiji i funkcionalniji, a opet kde je lepši i više windows-like
Da bi instalirao kde u fulu, možeš da ukucaš sudo apt-get kubuntu-desktop. Onda imaš kubuntu i ubuntu, pa pri prijavi možeš da biraš okruženje. a možeš i da ukloniš gnome, naravno
[ gille @ 05.03.2010. 20:42 ] @
Hvala na odgovorima. Koji kde da skinem i odakle( ako može neki link). Čitao sam da je 3.5 najstabilniji, da je 4,2 najlepši i sl.
[ component @ 05.03.2010. 21:23 ] @
Ne treba ništa da skineš. Sve će se samo odraditi. Samo u konzoli ukucaj:
Code:
sudo apt-get install kubuntu-desktop

pitaće te za šifru i nakon toga će krenuti download i instalacija automatski. Samo se zavali i sačekaj malo pošto može da potraje (zavisi koliko brzu konekciju imaš).
Preporučujem da KDE 3.5 zaboraviš. Ipak je to stara verzija. KDE 4.4.1 je poslednja verzija i tu ćeš dobiti po završenoj instalaciji. Ja taj koristim i izuzetno sam zadovoljan.
[ gille @ 05.03.2010. 21:46 ] @
Ok,super! Kako da dođem do konzole:)?
[ gille @ 05.03.2010. 21:52 ] @
Našao sam, još da instaliram.
[ Zoran Milovanovic @ 05.03.2010. 22:30 ] @
E, sada ces da se iznenadis.
[ Dragan Ar @ 06.03.2010. 06:25 ] @
POMOĆ!!!
Upisao sam u terminalu tu komandu, zavalio se i čekao.KAda sam sve skinuo i raspakovao i restartovao računar, umesto UBUNTU piše KUBUNTU :), međutim odmah na početku mi traži šifru i lozinku,a kada ih ukucam otvori se terminal. Ako pokušam da ga zatvorim onda me vraća na šifru i lozinku(mislim da se restartuje).
[ component @ 06.03.2010. 09:40 ] @
Ček, ček... normalno je da ti traži lozinku pri logovanju, zar ne? (osim ako nisi drugačije podesio) Da li ti slika logovanja izgleda nekako ovako:


Ako nakon logovanja dobiješ "ubuntu-deskop login: _" ili tako nešto znači da grafičko okruženje nije podignuto. Probaj pri logovanju da izabereš GNOME da vidiš da li se on podiže. Izabraćeš tako što prilikom logovanja klikneš na dugme koje se nalazi dole levo (okruglo dugme sa tri horizontalne crtice. Odmah pored dugmeta za gašenje odnosno restart)

Možda ti se KDE nije nešto dobro instalirao. Probaj ponovo. Ovaj put uradi:
Code:
sudo apt-get update

i nakon toga
Code:
sudo apt-get install kubuntu-desktop
[ gille @ 06.03.2010. 10:34 ] @
Trenutno sam na putu(pišem sa tel.). Početni ekran je sličan, plav,šifra, lozinka i ništa više. Probaću danas sa ovim komandama. Nadam se da će proraditi:) Pozdrav
[ gille @ 06.03.2010. 19:18 ] @
Uspeo sam da pređem na kde.Vrlo je zanimljiv,pun podešavanja što mi se sviđa. Ne mogu da se zakačim na net, malo se teže snalazim, ali je zanimljivo. Ostaje pitanje za, kraj kako da deinstaliram kde ili gnome u slučaju da rešim da se oslobodim jednog?
[ Srđan Pavlović @ 06.03.2010. 19:46 ] @
Uklanjanje GNOME-a i svega sto ima veze sa njim...

http://www.psychocats.net/ubuntu/purekde

ili obrnuto (uklanjanje KDE-a i svega sto ima veze sa njim)...

http://www.psychocats.net/ubuntu/puregnome.php
[ Zoran Milovanovic @ 06.03.2010. 19:46 ] @
Iznenadjenja su krenula ;)

Ok, da bi se zakacio na net pokusaj da podesis network manager applet (moguce da ne radi) ukoliko nece tako, pokreni u konzoli (ili alt+f2) nm-applet i trebalo bi da se pokrene onaj gnomov ;) Taj "radi". Uvek mozes da koristis konzolu da se zakacis, ali to nije u toku sa vremenom (mislim za desktop upotrebu).

BTW. koju verziju KDE-a si instalirao? Help pa About KDE na bilo kojoj KDE aplikicaji.

Ukoliko si instalirao 4.4 ili 4.4.1 mislim da neces imati network manager applet, tako da je parola zakaci se net kako znas i umes. ;)
[ component @ 06.03.2010. 20:01 ] @
Savetujem ti da se još ne oslobađaš ni jednog. Ako si duže koristio GNOME pa onda prešao na KDE trebaće ti malo dok se navikneš.
[ tasicss @ 01.02.2011. 02:11 ] @
E sad ovo mene isto interesuje, kupio sam laptop sa vec instaliranim Suse enterprise desktop 11 sa Gnome grafickim okruzenjem ali vise volim KDE i cini mi se mnogo je bolje podrzan programima nego Gnome pa me interesuje kako sa Gnome na KDE i dali je moguce installirati recimo Amarok koji dolazi uz KDE na Gnome,i kada ga pronadjem u Yast-u kaze mi da nije kompitabilan.
[ combuster @ 01.02.2011. 12:00 ] @
To sto ti javlja da nije kompatibilan mi nema mnogo smisla (osim ako nije jos jedan dep problem na SuSe-u :)). Jedino da napises ovde sta ti tacno javlja.

Inace mozes, na SuSe-u verovatno postoji meta paket koji ce ti povuci ceo KDE:

Idi na Software Management
View by Patterns
selektuj kde4-base i kde4-desktop

Nadam se da ces se snaci. E sad problem je sto ako ti ostanu i gnome aplikacije prikazivace ti se gomila aplikacija u meniju, onda samo deinstaliraj gnome... Ali pravo da ti kazem mozda ti je bolje da reinstaliras samo SuSe i odaberes KDE kao desktop, vec predvidjam gomilu problema posle ovakvog prelaska...
[ tasicss @ 02.02.2011. 16:38 ] @
Hvala na brzom odgovoru, ali evo problema:
preko Software manager -Yast nadjem konqueror naprimer ali izbaci sledece obavestenje:

There are some conflict on the transaction that must be solved manually

kde4-konqueror-4.1.3-7.23.6i586requires libstreamanalyzer.so.0, but this reqirement cannot be provided

Uninstallable providers: libstrigi0-05.11-39.24.i586 (suse-linux-enterprise-desktop-11 11-0)

onda opcije za izabrati:

do not forbid installation of libstrigi0-0.5.11-39.24.i586 suse-linux-enterprise-desktop-11 11-0)

do not install kde4-konqueror-4.1.3-7.23.6.i586

ignore some dependencies of kde4-konqueror


U predhodnom slucaju kod instalacije k-torrent-a sam isao na prvu opciju i ne krece dalje instalacija, probao drugu takodje isti rezultat potom na ignore i instalacija je prosla ali k-torrent ne funkcionise.
Upravo sam probao po uputstvu koje si mi dao da intaliram kdebase4 (the base kde apps) preko software management ali isto mi javlja da ne moze da nastavi instalaciju a problem kao i kod instalacije konqueror-a.
Dali je problem u KDE biblioteci i ako jeste kako mogu da je skinem da ne menjam graficko okruzenje?

[Ovu poruku je menjao tasicss dana 02.02.2011. u 17:52 GMT+1]
[ combuster @ 02.02.2011. 16:51 ] @
Meni nije jasno sta ce ti konqueror na gnome-u, ako ga koristis kao web browser imas puno boljih resenja za to od njega, a ako je kao file manager - to tek ne bih mogao da ti preporucim na gnome-u :)

Ako vec hoces KDE, reinstaliraj SuSe i izaberi KDE desktop pri instalaciji.

SuSe je poznat po problemima sa razresavanjem dep-ova (makar ga bije takva reputacija a iz mog iskustva sa njim apsolutno ju je zasluzio) mada se mozda nesto promenilo na bolje.

Moj ti je savet da se drzis programa koji su pisani za desktop okruzenje koje koristis. KDE je zesce povezao svoje aplikacije kroz strigi/nepomuk/akonadi (makar celokupni PIM/File/Internet browsing). Jos uvek je dostupno dosta aplikacija koje ne zavise od njih i za koje je dovoljno samo instalirati QT kao dep da bi radile (i jos po koja biblioteka) ali ti nece povuci ceo KDE-base...
[ NediM19 @ 13.02.2011. 10:15 ] @
Da li je moguce mijenjati providnost taskbar trake na KDE okruzenju i ako jeste kako?

Hvala!
[ miso.vucko @ 04.03.2011. 15:34 ] @
Instaliro sam kde na ubuntu-u prema gore bjašnjenom redu ali kada hoću pokreniti kde stvori mi se problem da mi nisu uključene neke NX karakteristike? Je zna neko u čemu je problem i kako da to riješim?

Nakon provjere u terminalu s funkcijom:

/usr/bin/check-bios-nx --verbose

izbaci mi:

This CPU is family 15, model 3, and has NX capabilities but is unable to
use these protective features because the BIOS is configured to disable
the capability. Please enable this in your BIOS. For more details, see:

https://wiki.ubuntu.com/Security/CPUFeatures

No međutim nigdje nema kako se to uključuje na bios-u? Zna mozda neko?


[Ovu poruku je menjao miso.vucko dana 04.03.2011. u 17:18 GMT+1]
[ combuster @ 04.03.2011. 19:24 ] @
http://en.wikipedia.org/wiki/NX_bit

Koja je ploca u pitanju ?

Mada me malo cudi da KDE nece da ti se pokrene zbog toga...
[ miso.vucko @ 04.03.2011. 21:14 ] @
Matična je Gigabayte GA-8IPE1000 Pro-G
Ovo je link od nje:

http://www.gigabyte.com/produc...page.aspx?pid=1759&dl=1#sp

Procesor mi je Intel Pentium 4, 2.8 Mhz

Probo sam čak nekoliko puta ponovno instalirati preko terminala ali uvjek se isto pojavljuje...
[ combuster @ 04.03.2011. 21:49 ] @
Sta ti daje :

dmesg | grep NX

?
[ miso.vucko @ 05.03.2011. 09:30 ] @
Nisam te razumio? Je trebam ukucati nešto u terminal da dobijem to ili? Nisam baš najbolji poznavatelj ubuntua pa ćeš mi morat malo precizniji biti...

Ako se to odnosi na ovu naredbu :

/usr/bin/kvm-ok

: izađe mi tada s terminala:

INFO: Your CPU does not support KVM extensions
KVM acceleration can NOT be used
[ combuster @ 05.03.2011. 10:35 ] @
Kucas u terminalu:

dmesg | grep NX

Ono sto ti izbaci posle te naredbe prekopiraj ovde.
[ miso.vucko @ 05.03.2011. 12:25 ] @
Poslje te naredbe dobijem ovo:

[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.580364] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.580451] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.580546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.584303] thermal LNXTHERM:01: registered as thermal_zone0
[ miso.vucko @ 05.03.2011. 13:22 ] @
Evo ovo su pojedinosti iz terminala za pojedine komponente ako to treba možda. Pokušo sam stvarno naći gdje da se to mijenja u BIOS-u ali ni traga niđe tom "Nx-capabilities".

MATIČNA PLOČA ( naredba u terminalu: "sudo dmidecode --type 2" )


# dmidecode 2.9
SMBIOS 2.3 present.

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: 8IPE1000P-G
Version: x.x
Serial Number:


RAM ( sudo dmidecode --type 17 )

# dmidecode 2.9
SMBIOS 2.3 present.

Handle 0x001F, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: 418 MHz (2.4 ns)
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None

Handle 0x0020, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 256 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: 418 MHz (2.4 ns)
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None

Handle 0x0021, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: A2
Bank Locator: Bank4/5
Type: Unknown
Type Detail: None
Speed: 418 MHz (2.4 ns)
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None

Handle 0x0022, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 256 MB
Form Factor: DIMM
Set: None
Locator: A3
Bank Locator: Bank6/7
Type: Unknown
Type Detail: None
Speed: 418 MHz (2.4 ns)
Manufacturer: None
Serial Number: None
Asset Tag: None
Part Number: None

CPU (sudo dmidecode --type 4)

# dmidecode 2.9
SMBIOS 2.3 present.

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket 478
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 33 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 3, Stepping 3
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) 4 CPU
Voltage: 1.4 V
External Clock: 209 MHz
Max Speed: 3600 MHz
Current Speed: 2926 MHz
Status: Populated, Enabled
Upgrade: Socket 478
L1 Cache Handle: 0x000B
L2 Cache Handle: 0x000C
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:

Handle 0x0005, DMI type 4, 35 bytes
Processor Information
Socket Designation: Socket 478
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 33 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 3, Stepping 3
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) 4 CPU
Voltage: 1.4 V
External Clock: 209 MHz
Max Speed: 3600 MHz
Current Speed: 2926 MHz
Status: Populated, Enabled
Upgrade: Socket 478
L1 Cache Handle: 0x000C
L2 Cache Handle: 0x000D
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:

CPU ( grep "model name" /proc/cpuinfo )

model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz


GPU (lspci | grep -i vga)

1:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6800 GS] (rev a2)



[Ovu poruku je menjao miso.vucko dana 05.03.2011. u 14:33 GMT+1]
[ combuster @ 05.03.2011. 13:47 ] @
Kernel je prepoznao da procesor podrzava NX-bit i omogucio ga.

Jel mozes da mi das tacan izlaz (po mogucstvu u fajlu) gde ti se KDE zali na NX ?

Citat:

Instaliro sam kde na ubuntu-u prema gore bjašnjenom redu ali kada hoću pokreniti kde stvori mi se problem da mi nisu uključene neke NX karakteristike?


E to mi treba, tacno sta ti javi kada pokrenes kde.
[ miso.vucko @ 05.03.2011. 14:18 ] @
Ovo dobijem kada pokrenem KDE:

Pojavi se crni ekran i ovo piše na njemu dolsovno:


Ubuntu 10.10 jhafjdhjfdh-desktop tty1
jhafjdhjfdh-desktop login:
Password:

(poslje kada upisem username i password):


Last login: Fri Mar 4 16:45:35 CET 2011 on tty 1

Linux jhafjdhjfdh-desktop 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:36:45
UTC 2010 i686 GNU/Linux

Ubuntu 10.10
Welcome to Ubuntu!
*Documentation: https://help.ubuntu.com/

Your CPU appears to be lacking expected security protections.
Please check your BIOS settings, or for more information, run:
/usr/bin/check-bios-nx --verbose
1 package can be updated
o updates are security updates.



Nakon ukucavanja te zadnje naredbe ( "/usr/bin/check-bios-nx --verbose" ) mi izbaci:

This CPU is family 15, model 3, and has NX capabilities but is unable to
use these protective features because the BIOS is configured to disable
the capability. Please enable this in your BIOS. For more details, see:
https://wiki.ubuntu.com/Security/CPUFeatures
[ combuster @ 05.03.2011. 15:55 ] @
Sta se dogadja kada kucas

exec ck-launch-session startkde

?
[ miso.vucko @ 05.03.2011. 16:21 ] @
Napokretanju sustava preko onoga crnoga KDE ekrana kada utipkam "exec ck-launch-session starstkde" dobijem:

Command `ex` form package `vim` (main)
Command `ex` form package `nvi` (universe)
Command `ex` form package `vim-nox` (universe)
Command `ex` form package `vim-gnome` (main)
Command `ex` form package `vim-tiny` (main)
Command `ex` form package `vim-gtk` (universe)
Command `ex` form package `afnix` (universe)

exc: command not found
[ miso.vucko @ 05.03.2011. 16:26 ] @
A ako otvorim dok radi ubuntu preko terminala onda mi se nesto kao paralelno uključi i kde dok još radi Gnome. Tj tipke i slova su jedno preko drugih. Pojavi se u terminalu masu nekih kodova (pojedini redovi su crvenom bojom označeni u terminalu).

Ovo se pojavi:

plasma-desktop(1720)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(127, 0)
Couldn't find node center. Skipping rendering.
Couldn't find node center. Skipping rendering.
Couldn't find node center. Skipping rendering.
Couldn't find node center. Skipping rendering.
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
plasma-desktop(1720)/libakonadi Akonadi::AgentManagerPrivate::createDBusInterface: AgentManager failed to get a valid AgentManager DBus interface. Error is: 1 "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not get owner of name 'org.freedesktop.Akonadi.Control': no such name"
plasma-desktop(1720)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
plasma-desktop(1720)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
[akonadiserver] search paths: ("/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin")
[akonadiserver] Found mysql_install_db: "/usr/bin/mysql_install_db"
[akonadiserver] Found mysql_upgrade: "/usr/bin/mysql_upgrade"
"akonadiserver" [out] "Looking for 'mysql' as: /usr/bin/mysql
"
"akonadiserver" [out] "Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck
"
"akonadiserver" [out] "Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--socket=/home/jhdfjdhjfdh/.local/share/akonadi/db_misc/mysql.socket'
"
[akonadiserver] /usr/bin/mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/home/jhdfjdhjfdh/.local/share/akonadi/db_misc/mysql.socket' (2) when trying to connect
[akonadiserver] FATAL ERROR: Upgrade failed
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
[akonadiserver] DbInitializer::run()
[akonadiserver] checking table "SchemaVersionTable"
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
[akonadiserver] checking table "ResourceTable"
[akonadiserver] checking table "CollectionTable"
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
[akonadiserver] checking table "MimeTypeTable"
[akonadiserver] checking table "PimItemTable"
[akonadiserver] checking table "FlagTable"
[akonadiserver] checking table "PartTable"
[akonadiserver] checking table "CollectionAttributeTable"
[akonadiserver] checking relation "PimItemFlagRelation"
[akonadiserver] checking relation "CollectionMimeTypeRelation"
[akonadiserver] checking relation "CollectionPimItemRelation"
[akonadiserver] DbInitializer::run() done
[akonadiserver] skipping update 2
[akonadiserver] skipping update 3
[akonadiserver] skipping update 4
[akonadiserver] skipping update 8
[akonadiserver] skipping update 10
[akonadiserver] skipping update 12
[akonadiserver] skipping update 13
[akonadiserver] skipping update 14
[akonadiserver] skipping update 15
[akonadiserver] skipping update 16
[akonadiserver] skipping update 17
[akonadiserver] skipping update 18
[akonadiserver] skipping update 19
[akonadiserver] Nepomuk Query Server not available
[akonadiserver] DataStore::unhideAllPimItems()
[akonadiserver] Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
PLUGINS: "/usr/share/akonadi/agents"
PLUGINS: ("birthdaysresource.desktop", "contactsresource.desktop", "icalresource.desktop", "imapresource.desktop", "kabcresource.desktop", "kcalresource.desktop", "knutresource.desktop", "kolabproxyresource.desktop", "localbookmarksresource.desktop", "maildirresource.desktop", "maildispatcheragent.desktop", "mboxresource.desktop", "microblog.desktop", "mtdummyresource.desktop", "nepomukcalendarfeeder.desktop", "nepomukcontactfeeder.desktop", "nepomuktagresource.desktop", "nntpresource.desktop", "notesresource.desktop", "pop3resource.desktop", "vcarddirresource.desktop", "vcardresource.desktop")
search paths: ("/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games")
PLUGINS inserting: "akonadi_birthdays_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_contacts_resource" 1 ("Resource")
PLUGINS inserting: "akonadi_ical_resource" 1 ("Resource")
PLUGINS inserting: "akonadi_imap_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_kabc_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_kcal_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_knut_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_kolabproxy_resource" 0 ("Resource", "Unique", "NoConfig")
PLUGINS inserting: "akonadi_localbookmarks_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_maildir_resource" 1 ("Resource")
PLUGINS inserting: "akonadi_maildispatcher_agent" 0 ("Unique", "Autostart", "NoConfig")
PLUGINS inserting: "akonadi_mbox_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_microblog_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_mailtransport_dummy_resource" 0 ("Resource", "MailTransport")
PLUGINS inserting: "akonadi_nepomuk_calendar_feeder" 0 ("Unique", "NoConfig")
PLUGINS inserting: "akonadi_nepomuk_contact_feeder" 0 ("Unique", "Autostart", "NoConfig")
PLUGINS inserting: "akonadi_nepomuktag_resource" 0 ("Resource", "Virtual", "Unique", "NoConfig")
PLUGINS inserting: "akonadi_nntp_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_notes_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_pop3_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_vcarddir_resource" 0 ("Resource")
PLUGINS inserting: "akonadi_vcard_resource" 0 ("Resource")
PLUGINS: "/usr/share/akonadi/agents"
PLUGINS: ("birthdaysresource.desktop", "contactsresource.desktop", "icalresource.desktop", "imapresource.desktop", "kabcresource.desktop", "kcalresource.desktop", "knutresource.desktop", "kolabproxyresource.desktop", "localbookmarksresource.desktop", "maildirresource.desktop", "maildispatcheragent.desktop", "mboxresource.desktop", "microblog.desktop", "mtdummyresource.desktop", "nepomukcalendarfeeder.desktop", "nepomukcontactfeeder.desktop", "nepomuktagresource.desktop", "nntpresource.desktop", "notesresource.desktop", "pop3resource.desktop", "vcarddirresource.desktop", "vcardresource.desktop")
Akonadi server is now operational.
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
QGraphicsLinearLayout::removeAt: invalid index 1
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setPen: Painter not active
QPainter::setFont: Painter not active
QPainter::end: Painter not active, aborted
plasma-desktop(1720)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(1720)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
Invalid D-BUS interface name 'org.kde.plasma-desktop.PlasmaApp' found while parsing introspection
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
[/usr/bin/akonadi_nepomuk_contact_feeder] "/usr/bin/akonadi_nepomuk_contact_feeder(1771)" Soprano: "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files"
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
[/usr/bin/akonadi_nepomuk_contact_feeder] "/usr/bin/akonadi_nepomuk_contact_feeder(1771)" Soprano: "QLocalSocket::connectToServer: Connection refused"
[/usr/bin/akonadi_nepomuk_contact_feeder] "/usr/bin/akonadi_nepomuk_contact_feeder(1771)" Soprano: "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files"
[/usr/bin/akonadi_nepomuk_contact_feeder] "/usr/bin/akonadi_nepomuk_contact_feeder(1771)" Soprano: "QLocalSocket::connectToServer: Connection refused"
[/usr/bin/akonadi_nepomuk_contact_feeder] "/usr/bin/akonadi_nepomuk_contact_feeder(1771)" Soprano: "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files"
[/usr/bin/akonadi_nepomuk_contact_feeder] "/usr/bin/akonadi_nepomuk_contact_feeder(1771)" Soprano: "QLocalSocket::connectToServer: Connection refused"
[/usr/bin/akonadi_nepomuk_contact_feeder] "/usr/bin/akonadi_nepomuk_contact_feeder(1771)" Soprano: "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files"
[/usr/bin/akonadi_nepomuk_contact_feeder] "/usr/bin/akonadi_nepomuk_contact_feeder(1771)" Soprano: "QLocalSocket::connectToServer: Connection refused"
[/usr/bin/akonadi_nepomuk_contact_feeder] Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
[/usr/bin/akonadi_nepomuk_contact_feeder] QMetaObject::invokeMethod: No such method KUniqueApplication::loadCommandLineOptionsForNewInstance()
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
plasma-desktop(1720)/libakonadi Akonadi::EntityTreeModelPrivate::fetchJobDone: Job error: "Unknown error."

"AgentManager::setAgentInstanceName" Agent instance "akonadi_contacts_resource_1" has no resource interface!
plasma-desktop(1720)/libakonadi: Unable to obtain the KConfigXT D-Bus interface of "akonadi_contacts_resource_1"
kio_desktop(1787)/kdecore (services) KMimeTypeFactory::parseMagic: Now parsing "/usr/share/mime/magic"
Couldn't find node center. Skipping rendering.
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
QMetaObject::invokeMethod: No such method PlasmaApp::loadCommandLineOptionsForNewInstance()
kcminit(1714)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkcm_kpk_update.so"
kcminit(1714)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkcm_kpk_addrm.so"
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
<unknown program name>(1807)/ kdemain: Xlib XKB extension major= 1 minor= 0
kcminit(1714)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkcm_hotkeys.so"
kcminit(1714)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkcm_keys.so"
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] Using Virtuoso Version: "6.1.2.3127-pthreads"
[/usr/bin/akonadi_nepomuk_contact_feeder] Using Virtuoso Version: "6.1.2.3127-pthreads"
[/usr/bin/akonadi_nepomuk_contact_feeder] void Soprano::VirtuosoController::writeConfigFile(const QString&, const Soprano::BackendSettings&) "/tmp/virtuoso_Lh1790.ini"
[/usr/bin/akonadi_nepomuk_contact_feeder] Starting Virtuoso server: "/usr/bin/virtuoso-t" ("+foreground", "+configfile", "/tmp/virtuoso_Lh1790.ini", "+wait")
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] " Sat Mar 05 2011
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:22:51 OpenLink Virtuoso Universal Server
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:22:51 Version 06.01.3127-pthreads for Linux as of Aug 3 2010
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:22:51 uses parts of OpenSSL, PCRE, Html Tidy
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:22:51 Database version 3126
[/usr/bin/akonadi_nepomuk_contact_feeder] "
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QMetaObject::invokeMethod: No such method KAccessApp::loadCommandLineOptionsForNewInstance()
[akonadiserver] Database "akonadi" opened using driver "QMYSQL"
kcminit(1714)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkcm_kpk_settings.so"
kcminit(1714)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkcm_emoticons.so"
Couldn't find synaptics properties. No synaptics driver loaded?
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:22:52 Entering Lite Mode
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] "17:22:52 SQL Optimizer enabled (max 1000 layouts)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
Nepomuk server already running.
[/usr/bin/akonadi_nepomuk_contact_feeder] QMetaObject::invokeMethod: No such method KUniqueApplication::loadCommandLineOptionsForNewInstance()
Failure: Module initalization failed
plasma-desktop(1720) TimelineSource::parse: Fatal error on line 848 , column 38 : "XML declaration not at start of document."
New PolkitAgentListener 0x9d2ed30
Adding new listener PolkitQt1::Agent::Listener(0x9db80e0) for 0x9d2ed30

(process:1829): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'

(process:1829): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
QMetaObject::invokeMethod: No such method PolicyKitKDE::loadCommandLineOptionsForNewInstance()
QMetaObject::invokeMethod: No such method KUniqueApplication::loadCommandLineOptionsForNewInstance()
QVariantMap DBusMenuExporterDBus::GetProperties(int, const QStringList&): Condition failed: action
QMetaObject::invokeMethod: No such method KMixApp::loadCommandLineOptionsForNewInstance()
Bus::open: Can not get ibus-daemon's address.
IBusInputContext::createInputContext: no connection to ibus-daemon
plasma-desktop(1720) TimelineSource::parse: Fatal error on line 43 , column 38 : "XML declaration not at start of document."
QMetaObject::invokeMethod: No such method KUniqueApplication::loadCommandLineOptionsForNewInstance()
params.c:OpenConfFile() - Unable to open configuration file "/home/jhdfjdhjfdh/.smb/smb.conf":
No such file or directory
params.c:OpenConfFile() - Unable to open configuration file "/home/jhdfjdhjfdh/.smb/smb.conf.append":
No such file or directory
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
QVariantMap DBusMenuExporterDBus::GetProperties(int, const QStringList&): Condition failed: action
kmix(1846) sink_input_cb: Ignoring sink-input due to it being designated as an event and thus handled by the Event slider
"/usr/bin/krunner(1840)" Soprano: "org.freedesktop.DBus.Error.UnknownObject - No such object path '/org/soprano/Server'"
"/usr/bin/krunner(1840)" Soprano: "QLocalSocket::connectToServer: Connection refused"
"/usr/bin/krunner(1840)" Soprano: "org.freedesktop.DBus.Error.UnknownObject - No such object path '/org/soprano/Server'"
"/usr/bin/krunner(1840)" Soprano: "QLocalSocket::connectToServer: Connection refused"
"/usr/bin/krunner(1840)" Soprano: "org.freedesktop.DBus.Error.UnknownObject - No such object path '/org/soprano/Server'"
"/usr/bin/krunner(1840)" Soprano: "QLocalSocket::connectToServer: Connection refused"
kio_http_cache_cleaner: Already running!
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
kio_http_cache_cleaner: Already running!
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
kio_http_cache_cleaner: Already running!
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
kio_http_cache_cleaner: Already running!
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:22:59 Compiler unit is timed at 0.013768 msec
[/usr/bin/akonadi_nepomuk_contact_feeder] "
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
plasma-desktop(1720)/kio (KIOJob) KIO::TransferJob::slotMimetype: mimetype() emitted again, or after sending first data!; job URL = KUrl("http://avatar.identi.ca/62144-48-20110126152752.png")
I/O warning : failed to load external entity "/home/jhdfjdhjfdh/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/jhdfjdhjfdh/.qalculate/eurofxref-daily.xml"
krunner(1840)/libplasma Plasma::Package::isValid: Could not find required file mainscript , look in "/home/jhdfjdhjfdh/Documents/contents/code/main"

QMetaObject::invokeMethod: No such method KRunnerApp::loadCommandLineOptionsForNewInstance()
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:01 Roll forward started
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:02 1000 transactions, 163840 bytes replayed (8 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:03 2000 transactions, 294912 bytes replayed (15 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:05 3000 transactions, 425984 bytes replayed (21 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:05 4000 transactions, 524288 bytes replayed (27 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:06 5000 transactions, 655360 bytes replayed (33 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:07 6000 transactions, 786432 bytes replayed (40 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:08 7000 transactions, 917504 bytes replayed (47 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:09 8000 transactions, 1015808 bytes replayed (52 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:10 9000 transactions, 1114112 bytes replayed (57 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:11 10000 transactions, 1245184 bytes replayed (64 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:12 11000 transactions, 1409024 bytes replayed (72 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:14 12000 transactions, 1540096 bytes replayed (79 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:15 13000 transactions, 1703936 bytes replayed (87 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:16 14000 transactions, 1835008 bytes replayed (94 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:17 14990 transactions, 1936310 bytes replayed (100 %)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:17 Roll forward complete
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:18 Checkpoint started
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:19 Checkpoint finished, log reused
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "17:23:19 Server online at 1111 (pid 1808)
[/usr/bin/akonadi_nepomuk_contact_feeder] "
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] Virtuoso started: 1808
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] Soprano::ODBC::ConnectionPool::ConnectionPool(const QString&, QObject*) "host=localhost:1111;uid=dba;pwd=dba;driver=/usr/lib/odbc/virtodbc_r.so"
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] Soprano::ODBC::Connection::Connection() QThread(0x97f67e8)
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] "/usr/bin/nepomukservicestub(1790)" Soprano: "SQLGetData for data lenght failed (iODBC Error: [OpenLink][Virtuoso iODBC Driver]CL056: Bookmarks not enable for statement)"
[/usr/bin/akonadi_nepomuk_contact_feeder] bool Soprano::Virtuoso::DatabaseConfigurator::updateFulltextIndexRules(bool) empty rule name!
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] virtual Soprano::ODBC::Connection::~Connection() QThread(0x97f67e8)
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] Soprano::ODBC::Connection::Connection() QThread(0x97f67e8)
"/usr/bin/krunner(1840)" Soprano: "org.freedesktop.DBus.Error.UnknownObject - No such object path '/org/soprano/Server'"
[/usr/bin/akonadi_nepomuk_contact_feeder] "/usr/bin/akonadi_nepomuk_contact_feeder(1771)" Soprano: "org.freedesktop.DBus.Error.UnknownObject - No such object path '/org/soprano/Server'"
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] virtual void Soprano::Server::LocalServer::incomingConnection(quintptr)
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] void Soprano::Server::ServerCorePrivate::addConnection(Soprano::Server::ServerConnection*) New connection. New count: 1
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] virtual void Soprano::Server::LocalServer::incomingConnection(quintptr)
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] void Soprano::Server::ServerCorePrivate::addConnection(Soprano::Server::ServerConnection*) New connection. New count: 2
[akonadiserver] Akonadi::NepomukSearchEngine(0x9d807d0) QDBusServiceWatcher(0x9d80a78)
[/usr/bin/akonadi_nepomuk_contact_feeder] [/usr/bin/nepomukservicestub] QObject::setParent: Cannot set parent, new parent is in a different thread
[/usr/bin/akonadi_nepomuk_contact_feeder] virtual void Soprano::Server::LocalServer::incomingConnection(quintptr)
[/usr/bin/akonadi_nepomuk_contact_feeder] void Soprano::Server::ServerCorePrivate::addConnection(Soprano::Server::ServerConnection*) New connection. New count: 3
[/usr/bin/akonadi_nepomuk_contact_feeder] Soprano::ODBC::Connection::Connection() Soprano::Server::ServerConnection(0x98f52c0)
[/usr/bin/akonadi_nepomuk_contact_feeder] virtual void Soprano::Server::LocalServer::incomingConnection(quintptr)
[/usr/bin/akonadi_nepomuk_contact_feeder] void Soprano::Server::ServerCorePrivate::addConnection(Soprano::Server::ServerConnection*) New connection. New count: 4
[/usr/bin/akonadi_nepomuk_contact_feeder] virtual void Soprano::Server::LocalServer::incomingConnection(quintptr)
[/usr/bin/akonadi_nepomuk_contact_feeder] void Soprano::Server::ServerCorePrivate::addConnection(Soprano::Server::ServerConnection*) New connection. New count: 5
[/usr/bin/akonadi_nepomuk_contact_feeder] Soprano::ODBC::Connection::Connection() Soprano::Server::ServerConnection(0x98fecc0)
[/usr/bin/akonadi_nepomuk_contact_feeder] virtual void Soprano::Server::LocalServer::incomingConnection(quintptr)
[/usr/bin/akonadi_nepomuk_contact_feeder] void Soprano::Server::ServerCorePrivate::addConnection(Soprano::Server::ServerConnection*) New connection. New count: 6
[/usr/bin/akonadi_nepomuk_contact_feeder] Soprano::ODBC::Connection::Connection() Soprano::Server::ServerConnection(0x991d788)
[/usr/bin/akonadi_nepomuk_contact_feeder] virtual void Soprano::Server::ServerConnection::run() thread done.
[/usr/bin/akonadi_nepomuk_contact_feeder] virtual Soprano::ODBC::Connection::~Connection() Soprano::Server::ServerConnection(0x991d788)
[/usr/bin/akonadi_nepomuk_contact_feeder] void Soprano::Server::ServerCore::serverConnectionFinished()
[/usr/bin/akonadi_nepomuk_contact_feeder] virtual Soprano::Server::ServerConnection::~ServerConnection() Removing connection
[/usr/bin/akonadi_nepomuk_contact_feeder] void Soprano::Server::ServerCore::serverConnectionFinished() Connection removed. Current count: 5
QMetaObject::invokeMethod: No such method Pager::toolTipHidden()
QMetaObject::invokeMethod: No such method ToolTipWidget::toolTipHidden()
[ combuster @ 05.03.2011. 16:57 ] @
Lose si otkucao komandu koliko vidim iz output-a:

otkucaj exec ck-session startkde

Ti si greskom otkucao exc ck-session startkde.

Koliko vidim tebi radi KDE samo te zeza display manager.

Kako se logujes uopste na GNOME ?
[ miso.vucko @ 05.03.2011. 17:27 ] @
Uf bice sam se zeznuo. Nakon naredbe "exec ck-session startkde"
izađe mi i na crnome ekranu kada s logiram u knde i na terminalu:

bash: exec: ck-session: not found

Logiram se automatski. Samo sam instaliro preko usb-a i stavio da mi sve te postavke logiranaj budu automatske. Imam na istome kompjuteru još windows 7. Na početku preko onoga GRUB-a mogu oddabrati koji sutav želim. Tu također ima i opciju od dva Ubuntu-a (Gnome i KDE)

Bi li pomoglo da reintaliram ubuntu? Možda se nije intaliro neki file...

[Ovu poruku je menjao miso.vucko dana 05.03.2011. u 19:57 GMT+1]
[ combuster @ 05.03.2011. 21:52 ] @
Najbolje bi bilo da odradis clean install. Ne znam tacno gde te koci ali valjalo bi da iskljucis opciju automatskog logovanja iz prostog razloga sto mozes preko display managera (kada ukucavas username i password) da izaberes tip sesije (obicno stoji pod session) - GNOME ili KDE.
[ miso.vucko @ 06.03.2011. 13:22 ] @
Instaliro sam nanovo ubuntu i sada mi se cini da sve radi dobro iako je trebalo nekoliko puta restartati kompjuter.

Je se može odma u GRUB-u odabrati želim li GNOM ili KDE? Kada se upali GNOM-e onda tamo ima dvije mogucnosti odabira Ubuntu Linux-a. Ovako točno po redu izgleda u onome pravokutniku kada se upali:

Ubuntu, with Linux 2.6.35-27-generic
Ubuntu, with Linux 2.6.35-27-generic (recovery mode)
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtest86+, serial console 115200)
Windows 7 (loader) (on / dev / sda1)

Je znaš možda kako da promjenim red boot-anja na početku u GRUB-u. Httio bih da mi se prvo upale Windows 7 pa poslje ako ja to izaberem Ubuntu. Trenutno mi je po deafult-u kada sam intaliro Ubuntu stavljeno da se prvo pali Ubuntu-Gnome.

Fala ti na pomoći puno;-)


[Ovu poruku je menjao miso.vucko dana 06.03.2011. u 14:43 GMT+1]
[ combuster @ 06.03.2011. 13:45 ] @
https://help.ubuntu.com/community/StartUpManager

Samo ne vidim kako ti u GRUB-u odabiras Ubuntu Gnome i Ubuntu KDE - osim ako nemas tripple boot sa W7. Ako je to jedan te isti ubuntu sa instaliranim i KDE i Gnome okruzenjem apsolutno ti nisu potrebni posebni grub unosi za kde i gnome (cak sta vise ne sluze nicemu, KDE ili Gnome biras iz display managera kao izbor sesije).
[ miso.vucko @ 06.03.2011. 13:48 ] @
Aha nisam znao. Pretpostavio sam da je možda to jer su bile dvije opcije za Ubuntu Linux.
Kako da promjenim redosljed load-a? Tj da mi win 7 bude prvi perilikom paljenaj kompa?
[ combuster @ 06.03.2011. 13:55 ] @
Pa instaliraj startup-manager, sve ti je objasnjeno na linku koji sam ti ostavio.
[ miso.vucko @ 06.03.2011. 14:42 ] @
Oprosti sta sam te toliko izgnjavio s ovime.

Evo pokušo sam instalirati startup manager kako pise ali pojavljuje mi se neka greška stalno.

Ovo dobijem u terminalu kada hoću preko njega pokremiti startup menager :

[email protected]:~$ sudo cp /boot/grub/menu.lst /boot/grub/menu.lst.original
[sudo] password for miso:
cp: cannot stat `/boot/grub/menu.lst': No such file or directory
[email protected]:~$ startupmanager
xrandr: Failed to get size of gamma for output defaultGenerating grub.cfg ...
ze of gamma for output defaultFound linux image: /boot/vmlinuz-2.6.35-27-generic
Found initrd image: /boot/initrd.img-2.6.35-27-generic
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sda1
done
Grub2 detected
Usplash not detected
Splashy not detected
**
GLib-GIO:ERROR:/build/buildd/glib2.0-2.26.1/gio/gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)
[email protected]:~$ sudo apt-get install startupmanager
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[email protected]:~$ sudo apt-get install startupmanager
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[email protected]:~$ sudo apt-get install startupmanager
Reading package lists... Done
Building dependency tree
Reading state information... Done
startupmanager is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[email protected]:~$ sudo apt-get install startupmanager
Reading package lists... Done
Building dependency tree
Reading state information... Done
startupmanager is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[email protected]:~$
[email protected]:~$ sudo cp /boot/grub/menu.lst /boot/grub/menu.lst.original
cp: cannot stat `/boot/grub/menu.lst': No such file or directory
[email protected]:~$ startupmanager
xrandr: Failed to get size of gamma for output defaultGenerating grub.cfg ...
ze of gamma for output defaultFound linux image: /boot/vmlinuz-2.6.35-27-generic
Found initrd image: /boot/initrd.img-2.6.35-27-generic
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sda1
done
Grub2 detected
Usplash not detected
Splashy not detected
**
GLib-GIO:ERROR:/build/buildd/glib2.0-2.26.1/gio/gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)
[email protected]:~$




A kada ga pokrenem preko "System > Administration > StartUp-Manager" tada se upali ali nemam ponuđene one 4 opcije kako piše tamo u tutorial-ima nego samo dvije i to :
Boot options i advanced.
Prema ovome sta ovdje pise trebale bi biti još 2 i to: security i appernace.
[ miso.vucko @ 06.03.2011. 14:50 ] @
Evo izgleda da ne radi zbog ovoga:

Grub 2 Note:. StartUp-Manager ver 1.9.12-1 works with GRUB 2, however some of the options available with Grub Legacy have not yet been incorporated to work with Grub 2. The Boot Options tab remains essentially unchanged. The Appearance and Advanced tabs contain fewer entries at present, and the Security tab does not exist with Grub 2 fully-installed.

Currently the following StartUp-Manager options work with GRUB 2:

* Timeout
* Default OS/kernel
* Misc. (Writes to the "GRUB_CMDLINE_LINUX=" line of /etc/default/grub but will not remove the same entries such as "splash" and "quiet" already entered on "GRUB_CMDLINE_LINUX_DEFAULT=")
o Show text during boot
* Display resolution - Placed on "GRUB_CMDLINE_LINUX=" line of /etc/default/grub as "vga=XXX". During boot GRUB 2 will note that the "vga=" option is deprecated


Tako piše u onim tutorialima.
Čudno mi onda zašto ga ne mogu pokrenuti preko terminala nego samo iz Ubuntua tj preko "System > Administration > StartUp-Manager". Je to normalno ili je neka greska?

Fala ti na trudu, puno si mi pomogo...
[ miso.vucko @ 06.03.2011. 21:05 ] @
Objasnili su mi na drugome forumu evo da stavim pa ako nekome bude trebalo mozda:

Za pokretanje start-up managera treba u terminalu napisati

sudo startupmanager

To je valjda zato jer trebaju administratorske ovlasti.


A sta se tice onih 4 opcije u start-up manageru. To je valjda bilo prije. sada po novome imaju samo 2, valjda s erusio ili tako nesto pa su ga "prikratili". Znači izgleda da je normalno da ima 2 opcije samo.