[ techtris @ 11.01.2004. 17:56 ] @
Pozdrav

imam problem sa novim rezacem Teac W552E.
U Nero-u (6.0.0.19) dolazi do Communication failure-a bez obzira na brzinu rezanja posle otprilike 30% procesa rezanja. Unistio sam dva Verbatim DataLifePlus diska misleci da je prvi medij los. Zatim sam probao da sa sledecim Verbatim Datalife diskom uradim simulaciju. Naravno, nije uspelo. Iskljucivanje BurnProofa ne pomaze, probao sam da iskljucim i IMAPI servis u Windowsu. Posto nista nije pomoglo, napravio sam image file u Nero-u, a onda simulirao rezanje image fajla u programu Alcohol 120% (1.4.7.1005). Medjutim, i to se prekinulo a evo sta je izmedju ostalog pisalo u log fajlu:


########################### Options Setting ###########################
Devices control interface: Default Driver Control Interface
CPU Priority Level: High
Memory Buffer Size (MB): 128
Examine the accuracy of data read from physical device: Yes
Turn off "Auto-Select best write speed" function if possible: No
Overburn disc(s): No
Fill memory buffer before recording discs: Yes
Ignore Media Type: Yes
RMPS (Recordable Media Physical Signature) Emulation: No
BAD Sectors Emulation: No
Sub-Channel Data Fixed & Emulation: No
Laserlock Emulation: No
Current Language: English

##################### Installed Device Drivers List #####################
, ACPI.sys, afd.sys, Aspi32.SYS, asyncmac.sys, ati2dvag.dll,
ati2mtag.sys, ati3duag.dll, audstub.sys, Beep.SYS, BOOTVID.dll, Cdfs.SYS,
cdrom.sys, CLASSPNP.SYS, disk.sys, dmio.sys, dmload.sys, drmk.sys,
dump_atapi.sys, dump_WMILIB.SYS, Dxapi.sys, dxg.sys, dxgthk.sys, Fastfat.SYS,
fdc.sys, Fips.SYS, flpydisk.sys, Fs_Rec.SYS, ftdisk.sys, gameenum.sys,
hal.dll, i8042prt.sys, Imapi.SYS, Intels51.sys, ipsec.sys, isapnp.sys,
kbdclass.sys, KDCOM.DLL, kmixer.sys, ks.sys, KSecDD.sys, mnmdd.SYS,
Modem.SYS, MODEMCSA.sys, mouclass.sys, MountMgr.sys, mrxdav.sys, mrxsmb.sys,
Msfs.SYS, msgpc.sys, msmpu401.sys, Mup.sys, NDIS.sys, ndistapi.sys,
ndisuio.sys, ndiswan.sys, NDProxy.SYS, netbios.sys, netbt.sys, Npfs.SYS,
ntdll.dll, Ntfs.sys, ntoskrnl.exe, Null.SYS, nv_agp.sys, nvapu.sys,
nvarm.sys, nvax.sys, nvmcp.sys, parport.sys, PartMgr.sys, ParVdm.SYS,
pci.sys, pciide.sys, PCIIDEX.SYS, portcls.sys, processr.sys, psched.sys,
ptilink.sys, rasacd.sys, rasl2tp.sys, raspppoe.sys, raspptp.sys, raspti.sys,
rdbss.sys, RDPCDD.sys, rdpdr.sys, redbook.sys, SCSIPORT.SYS, serenum.sys,
serial.sys, SI3112r.sys, sojubus.sys, sojuscsi.sys, sr.sys, srv.sys,
swenum.sys, sysaudio.sys, tcpip.sys, TDI.SYS, termdd.sys, update.sys,
USBD.SYS, usbehci.sys, usbhub.sys, usbohci.sys, USBPORT.SYS, usbprint.sys,
vga.sys, VIDEOPRT.SYS, VolSnap.sys, vsdatant.sys, wanarp.sys, watchdog.sys,
wdmaud.sys, win32k.sys, WMILIB.SYS

################## Detailed Information of Device(s) ##################

///////////////////////////////////////////////////////////////////////
(F:) TEAC CD-W552E (1:1) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: TEAC
Product Identification: CD-W552E
Production Revision Level: 1.13
Host/Target Number: 1/1
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), TAO
BURN-Free Technology: BURN-Proof
Auto-Select best write speed: Not Supported
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 01h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: No
DVD-R Read/Write: No/No
DVD-RAM Read/Write: No/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: No
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: No
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
Maximum Read Speed Supported (with current disc): 52X (7800 KB/Sec)
Maximum Write Speed Supported (with current Disc): 48X (7200 KB/Sec)
Current Read Speed Supported (with current Disc): 52X (7800 KB/Sec)

#######################################################################

Session 01:
Track 01: Mode 1, Length: 272219(531.7 MB), Address: 000000
#############################################################################

####################### Dumping/Recording Progress Log #######################
18:45:07 Processor info: AMD Athlon(tm) XP 2500+ (1837MHz)
18:45:07 Memory Available to Windows: 523.760 KB
18:45:07 Memory Buffer size: 128 MB
18:45:08 Image file loading: C:\Documents and Settings\Dragan\Desktop\programi 6.iso
18:45:08 Source Info: Session: 1, Track: 1, Length: 531.7 MB / 060:29:44
18:45:10 (F:) TEAC CD-W552E (1:1): Recording Method/Speed
18:45:10 Simulated recording - DAO / SAO - 48X (7200 KB/Sec)
18:45:10 (F:) TEAC CD-W552E (1:1): BURN-Free activated
18:45:31 (F:) TEAC CD-W552E (1:1) - [Write ERROR], LBA: 14288, Length: 16
S:KEY - 04/08/03 - "Logical Unit Communication CRC Error (Ultra-DMA/32)"
18:45:42 (F:) TEAC CD-W552E (1:1): Recording failed!
18:45:42 Error message: [04/08/03] - Logical Unit Communication CRC Error (Ultra-DMA/32)
18:45:42 (F:) TEAC CD-W552E (1:1): Simulated recording failed!
18:45:42 Image file loading aborted!
18:45:44 Something is wrong with the recording procedure!
Please check the log file and report any errors to Technical Support.
##############################################################################

Koristim WinXP Pro SP1. Konfiguracija Athlon 2500+ (barton), 512 MB DDR Single Ch., Maxtor DM+9 80MB, Asus A7N8X Deluxe 2.0 (najnovija revizija BIOS-a), nForce drajveri 2.45.

Jel imate neki predlog?

Hvala

[ kUdtiHaEX @ 12.01.2004. 13:34 ] @
Probaj da ga stavis kao master na drugoj IDE grani, tj tu bi i trebalo da bude jer je pravilo da se rezaci vezuju iskljucivo kao master.