Koji izlaz daju komande iz terminala:

sane-find-scanner

scanimage -L

Takodje daj izlaz od:

cat /etc/group

/edit: Uozbilji se malo ;-)

Meni deluje kao problem do drajvera. Za Canon jedino da te posavetujem da nađeš SuSE drajvere pošto je moguće da se razlikuju od Ubuntu drajvera (mada ne znam zašto bi).
Što se tiče skenera, ja sam imao sličan problem na Ubuntu sa Mustek 1248. Skinuo sam .usb sa sajta: http://www.meier-geinitz.de/sane/gt68xx-backend/ i pratio uspustva (prekopirao .usb fajl u /usr/share/sane/gt68xx/) i sad radi ko bombona.
Sa SuSE baš i nemam nekih iskustava

Evo izlaza koje daju komande iz terminala:

"sane-find-scanner":

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied.
libusb requires write access to USB device nodes.
found USB scanner (vendor=0x0400 [National Semiconductor], product=0x1000 [Merlin Scanner], chip=LM9831) at libusb:003:002
libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/004/002: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/004/002: Permission denied.
libusb requires write access to USB device nodes.
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.



"scanimage -L":

device `plustek:libusb:003:002' is a Mustek BearPaw 1200 flatbed scanner

"cat /etc/group":

at:!:25:
audio:x:17:pulse
avahi:!:104:
beagleindex:!:108:
bin:x:1:daemon
cdrom:x:20:
console:x:21:
daemon:x:2:
dialout:x:16:
disk:x:6:
floppy:x:19:
ftp:x:49:
games:x:40:
gdm:!:112:
haldaemon:!:110:
icecream:!:115:
kmem:x:9:
lp:x:7:
mail:x:12:
maildrop:!:59:
man:x:62:
messagebus:!:102:
modem:x:43:
mysql:!:114:
news:x:13:
nobody:x:65533:
nogroup:x:65534:nobody
ntadmin:!:71:
ntp:!:101:
oprofile:!:113:
polkituser:!:109:
postfix:!:51:
public:x:32:
pulse:!:106:
pulse-access:!:107:
root:x:0:
rtkit:!:105:
shadow:x:15:
sshd:!:65:
suse-ncc:!:111:
sys:x:3:
tape:!:103:
tomcat:!:116:
trusted:x:42:
tty:x:5:
utmp:x:22:
uucp:x:14:
video:x:33:YM
wheel:x:10:
www:x:8:
xok:x:41:
users:x:100:

Evo probao sam taj driver sto imam koji navodno radi za ubuntu
i evo rezultata stampanja test strane:

canonlbp800-1 root 17408 Fri Dec 10 16:12:49 2010
printer canonlbp800 is idle. enabled since Fri Dec 10 16:12:51 2010
/usr/lib/cups/filter/foomatic-rip failed
I to je to nista se ne desava...
Stampac je prepoznat kao:
Cannon LPB-800 Foomatic/lbp800
Cannon LPB-800 LPT #1


Nadam se da je ovo malo ozbiljinije...

Dodaj svog usera u LP grupu

lp:x:7:

To ti je ta. Najbolje da dodas svoj user account u tu grupu preko YAST user management-a. Logout/Login pa probaj opet.

Evo uradio dodao sam svog usera u lp grupu, ali i dalje ne rade ni stampac ni skener?
Ne vidim da se ista bitno promenilo...
Sada mi stampac cak ni ne proizvodi nikakav zvuk, a ranije sam nesto preko cups-a cini mi se uspeo barem to da ga nateram da uradi...
Sta mi je ciniti sada?

P.S.
Probao sam i da skinem i dodam usb-driver sa onog sajta ( http://www.meier-geinitz.de/sane/gt68xx-backend/ ) ali opet ne vidim nikakve promene?!

Evo novog izlaza svih komandi posle dodavanja usera u lp-grupu:


# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied.
libusb requires write access to USB device nodes.
found USB scanner (vendor=0x0400 [National Semiconductor], product=0x1000 [Merlin Scanner], chip=LM9831) at libusb:003:003
libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/004/002: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/004/002: Permission denied.
libusb requires write access to USB device nodes.
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.


device `plustek:libusb:003:003' is a Mustek BearPaw 1200 flatbed scanner



at:!:25:
audio:x:17:pulse
avahi:!:104:
beagleindex:!:108:
bin:x:1:daemon
cdrom:x:20:
console:x:21:
daemon:x:2:
dialout:x:16:
disk:x:6:
floppy:x:19:
ftp:x:49:
games:x:40:
gdm:!:112:
haldaemon:!:110:
icecream:!:115:
kmem:x:9:
lp:x:7:YM
mail:x:12:
maildrop:!:59:
man:x:62:
messagebus:!:102:
modem:x:43:
mysql:!:114:
news:x:13:
nobody:x:65533:
nogroup:x:65534:nobody
ntadmin:!:71:
ntp:!:101:
oprofile:!:113:
polkituser:!:109:
postfix:!:51:
public:x:32:
pulse:!:106:
pulse-access:!:107:
root:x:0:
rtkit:!:105:
shadow:x:15:
sshd:!:65:
suse-ncc:!:111:
sys:x:3:
tape:!:103:
tomcat:!:116:
trusted:x:42:
tty:x:5:
utmp:x:22:
uucp:x:14:
video:x:33:YM
wheel:x:10:
www:x:8:
xok:x:41:
users:x:100:

Probaj da dodas YM u grupe users, wheel, polkituser po ovom redosledu jedan po jedan. Posle svakog dodavanja restart pa probaj.

Evo ovako uradio sam sve po redu, dodao sam svog usera u grupe users, wheel, polkituser po ovom redosledu jedan po jedan i posle svakog dodavanja restart pa probao ponovo i nista se nije promenilo...
Probao sam da pokrenem gedit i xsane iz konzole kao superuser i isti je efekat, tako da ne vidim kako bi dodavanje u grupe pomoglo kada superuser nema privilegiju da stampa i skenira?!

Znaci stampac ne moze da uvuce papir i odstampa mada sve pripremne radnje kao da uradi, a skener pocne samo da svetli i to je to... Znaci potpuni neuspeh - uredjaji rade perfektno pod windows-om vec godinama i linux ih prepoznaje ali ja ne mogu da ih kokristim... I dalje sam ocajan i ne mogu da verujem da mi se ovo desava nekako verujem da je resenje nadohvat ruke ali ne znam gde da pruzim ruku da bih ga se domogao...

P.S.
U medjuvremenu mi je i stampac poceo da radi, ustvari samo nisam imao dovoljno strapljenja da sacekam da pocne da zuji kada se startuje stampanje iz Writer-a (sto nekada kao i da ne odradi) ali iz gedit-a sve radi odmah...
Izvinjavam se zbog sporih odgovora ali imam dosta obaveza trenutno, a i deprimira me trenutno stanje stvari.



<sub>[Ovu poruku je menjao adamtorrent dana 24.12.2010. u 00:33 GMT+1]

[Ovu poruku je menjao adamtorrent dana 24.12.2010. u 00:35 GMT+1]

[Ovu poruku je menjao adamtorrent dana 24.12.2010. u 00:39 GMT+1]</sub>

Ne znam dokle si stigao,ali evo ovde kaže da ti je skener podržan.
Ja imam scan express 1200 ub plus i da bi radio moram da ubacim firmware u i da ubrišem sve iz konfiguracionog fajla
i ostavim samo to što se odnosi na njega ,znači nešto kao :


Verovatno je to i kod tebe.






<sub>[Ovu poruku je menjao dare023 dana 04.01.2011. u 20:56 GMT+1]

[Ovu poruku je menjao dare023 dana 04.01.2011. u 20:59 GMT+1]</sub>

@dare023
Probao sam sa podesavanjem xsane-a, ali nisam bas uspeo...
Cini mi se da nisam oko drajvera uradio sve bas kako treba, a ako nevaljaju drajveri (posto imam bearpaw 1200, a tamo su 1200 CS, CU, CS plus, CU PLUS, TA) onda jedino da probam sa originalnim fajlom sa cd-a za win98, to mi jos ostaje kao solucija samo da nadjem cd...
Hvala u svkom slucaju i nadam se da ce problem biti razresen, barem tako pise na sajtu xsane-a...

Da,ali nisi pročitao stranicu do kraja !
U dnu lepo piše da je tvoj skener podržan ovde,a u dnu te stranice imaš ovaj mail "gerhard AT gjaeger DOT de",lepo pokušaj da kontaktiraš čoveka.Ja sam davno još tako uradio i otada koji god distro da koristim radim kako mi je rekao i skener radi,a bilo je to na Mandrake 10.1 ,znači pre 6-7 godina.

@dare023
E pa onda je cini mi se problem resen, mada sam tako nekako i mislio. Hvala jos jednom!

P.S.
Jedino ostaje problem sa stampacem, a gde god da pogledam ne vidim resenje
...ako nesto uspem javljam...

Evo ti nešto ovde ,za početak...

@dare023
Problem sa skenerom je resen kontaktirao sam coveka, i rekao mi je openSuSE podrzan moj skener i da ne treba nista da radim. U pitanju je samo warming up(koji traje 1 minut i 40 sekundi), to je postojalo i u win98 samo sam zaboravio (davno je to bilo). Tako da mi skener radi
Hvala jos jednom!!!

P.S.
Bio sam vec na toj strani za stampac i kada kliknem na link, za download driver-a, kaze da strana ne postoji vise... Na zalost
Imam ja dva drajvera za ubuntu mada ih nisam probao u tom distrou linuxa (mislim probao sam ubuntu ali mi se ne svidja), ali mi u OpenSuSE-u ne rade...

<sub>[Ovu poruku je menjao adamtorrent dana 19.01.2011. u 10:37 GMT+1]

[Ovu poruku je menjao adamtorrent dana 19.01.2011. u 10:38 GMT+1]</sub>

http://forums.linux-foundation.org/file.php?25,file=1154

Samo kazu malo teze se kompajlira. Probaj da vidimo da li radi.

Strana: http://forums.linux-foundation.org/read.php?25,3062,page=2

@Marko_R
Hvala dosao sam uz pomoc nekih ljudi do te iste stranice i kolko vidim trebalo bi da radi samo jos nisam imao vermena da isprobam...
Pozz i hvala na trudu svima!
P.S.
Javicu ako bude bilo nekakvih problema, ali cini mi se da je problem skoro resen.

Problem resen!
Stampac sam namestio i radi jedino sto ne moze da se namesti preko Yast-a nego preko cupsd-a

Sve radi perfektno jedino sto sistem pri samom procesu izbacuje neku gresku, ali to je vec po mom misljenju posao za ljude koji prave openSuSE...
Znaci stampac radi, ako nekome treba drajver (ja sam drajver imao odavno, vec kada sam postavio problem na forumu) moze ga naci ovde.
Pozdrav i monogo hvala svima!!!