Probao i ne radi
Code:
claire:/home/voyager # lsmod
Module Size Used by Tainted: PF
af_packet 13168 0 (autoclean)
irtty 6080 2 (autoclean)
ircomm-tty 21536 0 (autoclean)
ircomm 8588 0 (autoclean) [ircomm-tty]
ide-cd 32416 0 (autoclean)
videodev 6272 0 (autoclean)
agpgart 45752 3 (autoclean)
nvidia 1628480 11 (autoclean)
isa-pnp 32712 0 (unused)
lp 6304 0 (autoclean)
irda-usb 10800 0 (unused)
irda 96380 2 [irtty ircomm-tty ircomm irda-usb]
snd-seq-midi 5088 0 (unused)
ir-usb 6752 0
snd-seq-midi-event 3840 0 [snd-seq-midi]
usbserial 19836 0 [ir-usb]
Oni su podignuti i rade, ali jednostavno nece da se odazovu.
Evo jednog isecka dmesg outputa:
Code:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 14:24:02 Sep 24 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: new USB device 00:11.2-1, assigned address 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
usb.c: USB device 2 (vend/prod 0xc76/0x5) is not claimed by any active driver.
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:11.2-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x50f/0x180) is not claimed by any active driver.
/dev/vmmon: VMMON CPUID: Unrecognized CPU
/dev/vmmon: Module vmmon: registered with major=10 minor=165
/dev/vmmon: Module vmmon: initialized
CSLIP: code copyright 1989 Regents of the University of California
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
PPP generic driver version 2.4.2
/dev/vmnet: open called by PID 1050 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: peer interface eth0 not found, will wait for it to come up
bridge-eth0: attached
/dev/vmnet: open called by PID 1086 (vmnet-netifup)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1085 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1074 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1296 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1414 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Model: TS64MJFLASHA Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 126600 512-byte hdwr sectors (65 MB)
sda: Write Protect is off
sda: sda1
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for IR Dongle
usbserial.c: IR Dongle converter detected
usbserial.c: IR Dongle converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
ir-usb.c: USB IR Dongle driver v0.4
usb.c: registered new driver irda-usb
USB IrDA support registered
lp0: using parport0 (polling).
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via KT266/KT266x/KT333 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 01:00.0 into 4x mode
Linux video capture interface: v1.00
ide-floppy driver 0.99.newide
hdb: attached ide-cdrom driver.
hdb: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
IrCOMM protocol (Dag Brattli)
IrDA: Registered device irda0
Najzanimljiviji mi je taj poslednji red..irda0 dev postoji, ali ako probam da se konektujem na njega, a ne na ircomm0 kaze mi da uredjaj uopste ne postoji.
A kad se Lin gasi evo sta je tacno pisalo:
Code:
Can't locate module irda
Can't locate module -s
