|
[ Mare34 @ 30.04.2011. 13:47 ] @
[ SStudio @ 30.04.2011. 17:57 ] @
Myth nisam koristio tako da ne znam, ali instaliraj xavtv ili tvtime i u podešavanjima ima select source odabereš tv, ako je sve instalirano možeš da odradiš skeniranje. Jel kartica radi? tjs jesu učitani moduli?
[ Mare34 @ 30.04.2011. 20:10 ] @
Za TvTime mi da ovu grešku:
xvoutput: No XVIDEO port found which supports YUY2 images. *** tvtime requires hardware YUY2 overlay support from your video card *** driver. If you are using an older NVIDIA card (TNT2), then *** this capability is only available with their binary drivers. *** For some ATI cards, this feature may be found in the experimental *** GATOS drivers: http://gatos.souceforge.net/ *** If unsure, please check with your distribution to see if your *** X driver supports hardware overlay surfaces. Jel ima neki tutorijal za učitavanje modula za karticu? [ SStudio @ 30.04.2011. 22:44 ] @
Zvuči mi kao problem grafičke a ne tv kartice, jesi instalirao drajvere za grafičku?
Ako si instalirao drajver probaj da dodaš u Device sekciju xorg.conf fajla ovo Option "VideoOverlay" "on" Option "OpenGLOverlay" "off" Module tjs drajvere za tv karticu treba da učita automatski sam kernel proveri ukucavanjem lsmod u terminal, i udari copy past iz terminala ovde da vidimo šta radi a šta ne. [ Mare34 @ 01.05.2011. 00:21 ] @
Kako da proverim da li mi je instaliran drajver za grafiku? Zar nije on po defaultu instaliran?
[ combuster @ 01.05.2011. 01:04 ] @
Okaci ovde /var/log/Xorg.0.log
[ Mare34 @ 01.05.2011. 12:45 ] @
Evo log fajla:
http://www.4shared.com/file/ToPOo4l7/Xorg0.html [ combuster @ 01.05.2011. 13:56 ] @
Koji model nVIDIA-e imas ? Valjalo bi da probas sa proprietary drajverima, buduci da je nouveau jos uvek "flaky".
Dakle, u zavisnosti od modela graficke koju imas treba da povuces 173.xx ili 96.xx nvidia drajvere iz repoa. [ Mare34 @ 01.05.2011. 14:15 ] @
GT 240, probo sam da skinem sa sajta NVIdia, neće da pokrene instalaciju.
Može samo yum komanda za instalaciju tih drivera sa reopa? [ combuster @ 01.05.2011. 14:38 ] @
Moras prvo da enable-ujes rpmfusion repo na fedori pa onda odradi po ovom uputstvu:
http://rpmfusion.org/Package/x...redirect=Package%2Fkmod-nvidia [ Mare34 @ 01.05.2011. 14:46 ] @
Rešio problem sa nVidia karticom, više ne daje tu poruku, sad izbaci normalno tvtime.
Krenuo sam sa skeniranjem kanala i neće nijedan da skenira. [ combuster @ 01.05.2011. 18:06 ] @
E to ti je sad dzongliranje sa modulom za tv karticu.
WinFast 2000XP Expert koristi CX2388X chipset, card=5 je sigurica a sad koji je tuner nemam pojma, probaj tuner=38. Dakle u /etc/modprobe.conf (ili /etc/modprobe.d/modprobe.conf) ne znam kako je na fedori dodaj liniju options cx8800 card=5 tuner=38 restart pa probaj. [ Mare34 @ 02.05.2011. 10:51 ] @
Probao sam svašta sa modprobe, ali ne ide.
Probao sam sa xawtv i daje mi ovu poruku: This is xawtv-3.99.rc6, running on Linux/x86_64 (2.6.35.12-90.fc14.x86_64) xinerama 0: 1680x1050+0+0 WARNING: No DGA direct video mode for this display. /dev/video0 [v4l2]: no overlay support v4l-conf had some trouble, trying to continue anyway Warning: Missing charsets in String to FontSet conversion Warning: Missing charsets in String to FontSet conversion Oops: can't load any font A za xawtv -hwscan mi daje poruku: This is xawtv-3.99.rc6, running on Linux/x86_64 (2.6.35.12-90.fc14.x86_64) looking for available devices port 313-344 type : Xvideo, image scaler name : NV17 Video Texture /dev/video0: OK [ -device /dev/video0 ] type : libv4l name : Leadtek Winfast 2000XP Expert flags: capture tuner Evo šta mi izbaci: dmesg | grep cx88 Code: [ 7.181520] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 7.181563] cx8800 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 7.184738] cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected], frontend(s): 0 [ 7.184742] cx88[0]: TV tuner type 44, Radio tuner type -1 [ 8.646654] tuner 1-0060: chip found @ 0xc0 (cx88[0]) [ 8.672374] tuner 1-0043: chip found @ 0x86 (cx88[0]) [ 8.777094] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01 [ 8.848154] input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:04:01.0/rc/rc0/input5 [ 8.848234] rc0: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:04:01.0/rc/rc0 [ 8.848243] cx88[0]/0: found at 0000:04:01.0, rev: 5, irq: 19, latency: 32, mmio: 0xf9000000 [ 8.848314] cx88[0]/0: registered device video0 [v4l2] [ 8.848360] cx88[0]/0: registered device vbi0 [ 8.848406] cx88[0]/0: registered device radio0 [ 3186.046030] cx8800 0000:04:01.0: PCI INT A disabled [ 3221.204365] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 3221.204408] cx8800 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3221.207624] cx88[0]: subsystem: 107d:6611, board: ASUS PVR-416 [card=12,insmod option], frontend(s): 0 [ 3221.207628] cx88[0]: TV tuner type 38, Radio tuner type -1 [ 3221.334398] tuner 1-0060: chip found @ 0xc0 (cx88[0]) [ 3221.340202] tuner 1-0043: chip found @ 0x86 (cx88[0]) [ 3221.397183] cx88[0]/0: found at 0000:04:01.0, rev: 5, irq: 19, latency: 32, mmio: 0xf9000000 [ 3221.397499] cx88[0]/0: registered device video0 [v4l2] [ 3221.397561] cx88[0]/0: registered device vbi0 [ 3221.397627] cx88[0]/0: registered device radio0 [ 3468.647038] cx8800 0000:04:01.0: PCI INT A disabled [ 3470.770375] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 3470.770420] cx8800 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3470.774852] cx88[0]: subsystem: 107d:6611, board: ASUS PVR-416 [card=12,insmod option], frontend(s): 0 [ 3470.774857] cx88[0]: TV tuner type 38, Radio tuner type -1 [ 3470.895833] tuner 1-0060: chip found @ 0xc0 (cx88[0]) [ 3470.900793] tuner 1-0043: chip found @ 0x86 (cx88[0]) [ 3470.957941] cx88[0]/0: found at 0000:04:01.0, rev: 5, irq: 19, latency: 32, mmio: 0xf9000000 [ 3470.958304] cx88[0]/0: registered device video0 [v4l2] [ 3470.958940] cx88[0]/0: registered device vbi0 [ 3470.959157] cx88[0]/0: registered device radio0 [ 3598.091035] cx8800 0000:04:01.0: PCI INT A disabled [ 3667.698785] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 3667.698829] cx8800 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3667.702376] cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,insmod option], frontend(s): 0 [ 3667.702381] cx88[0]: TV tuner type 38, Radio tuner type -1 [ 3667.818989] tuner 1-0060: chip found @ 0xc0 (cx88[0]) [ 3667.823668] tuner 1-0043: chip found @ 0x86 (cx88[0]) [ 3667.874942] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01 [ 3667.881278] input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:04:01.0/rc/rc1/input6 [ 3667.881442] rc1: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:04:01.0/rc/rc1 [ 3667.881452] cx88[0]/0: found at 0000:04:01.0, rev: 5, irq: 19, latency: 32, mmio: 0xf9000000 [ 3667.882036] cx88[0]/0: registered device video0 [v4l2] [ 3667.882567] cx88[0]/0: registered device vbi0 [ 3667.882969] cx88[0]/0: registered device radio0 Copyright (C) 2001-2024 by www.elitesecurity.org. All rights reserved.
|