Migracija sa Small Business Servera 2003 na Foundation 2008

[ Ignjatije Antiohijski @ 23.02.2012. 07:16 ] @

Imam sledeci problem:

Odradili smo migraciju pomenutu u naslovu. Nakon nekoliko dana pocinje da se na novom serveru (2008) pojavljuje izvestaj o sledecoj gresci:
"The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically shut down in 0 hour(s) 30 minute(s)."
Naravno, prvo sam guglovao, isao na Microsoft sajtove, ali problem nije resen. I server se gasi otprilike jednom mesecno.
Ovo je jedini DC.
Na starom serveru smo odradili demote nakon sto smo novi promovisali u DC (dok su serveri bili konektovani). Foundation ima samo 3 racunarskih naloga u domenu.
Nakon migracije i demote, stari server smo iskljucili iz domena, i vise nije ni u funkciji.
The Forest Functional Level je i dalje Server 2003.

Ima li neko konkretnu ideju, kako resiti problem? Ili, mozda treba da pruzim jos nesto od podataka da bi bilo jasnije?

Hvala na svakom pokusaju pomoci.

[ rajco @ 23.02.2012. 07:36 ] @

Uradi dcdiag i netdiag na serveru i postuj nam pod code tagovima output. Mislim da će ti se server restartovati i na sat vremena. U kom trenutku si prebacio sve FSMO role? Pomoglo bi ako nam kažeš po kojoj si proceduri radio migraciju.

[ Ignjatije Antiohijski @ 23.02.2012. 08:26 ] @

Imam problem sa instalacijom Netdiag (installation ended prematurely), pa dok ne resim evo ovog izvestaja.

C:\Users\Administrator>Dcdiag

Directory Server Diagnosis

Performing initial setup:
Trying to find home server...
Home Server = server2008
* Identified AD Forest.
Done gathering initial info.

Doing initial required tests

Testing server: Default-First-Site-Name\SERVER2008
Starting test: Connectivity
......................... SERVER2008 passed test Connectivi

Doing primary tests

Testing server: Default-First-Site-Name\SERVER2008
Starting test: Advertising
......................... SERVER2008 passed test Advertisin
Starting test: FrsEvent
......................... SERVER2008 passed test FrsEvent
Starting test: DFSREvent
......................... SERVER2008 passed test DFSREvent
Starting test: SysVolCheck
......................... SERVER2008 passed test SysVolChec
Starting test: KccEvent
......................... SERVER2008 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SERVER2008 passed test KnowsOfRol
Starting test: MachineAccount
......................... SERVER2008 passed test MachineAcc
Starting test: NCSecDesc
......................... SERVER2008 passed test NCSecDesc
Starting test: NetLogons
......................... SERVER2008 passed test NetLogons
Starting test: ObjectsReplicated
......................... SERVER2008 passed test ObjectsRep
Starting test: Replications
......................... SERVER2008 passed test Replicatio
Starting test: RidManager
......................... SERVER2008 passed test RidManager
Starting test: Services
......................... SERVER2008 passed test Services
Starting test: SystemLog
......................... SERVER2008 passed test SystemLog
Starting test: VerifyReferences
......................... SERVER2008 passed test VerifyRefe

Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckS
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation

Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckS
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation

Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValida

Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSD
Starting test: CrossRefValidation
......................... Configuration passed test CrossRe

Running partition tests on : BREG
Starting test: CheckSDRefDom
......................... BREG passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... BREG passed test CrossRefValidati

Running enterprise tests on : BREG.local
Starting test: LocatorCheck
......................... BREG.local passed test LocatorChe
Starting test: Intersite
......................... BREG.local passed test Intersite

[ rajco @ 23.02.2012. 08:41 ] @

Dok ne pogledam detaljnije ti možeš da edituješ privatne podatke, pa umesto svog domena stavi Test ili contoso. Nisi mi odgovorio za FSMO role i proceduru po kojoj si radio migraciju.

[ Ignjatije Antiohijski @ 23.02.2012. 08:55 ] @

Problem je sto se kolega, koji je to radio, ne seca.
Ovde sam dosao nedavno, a to su uradili pre mene. Samo mi je rekao STA je uradio, ali se ne seca redosleda i procedure.
Sada ne znam, sta mi je ciniti.

hvala na vremenu

[ rajco @ 24.02.2012. 11:07 ] @

Odradi i ovo pa nam daj ispis sa tvog servera.

Code:
C:\Users\Administrator>ntdsutil
ntdsutil: roles
fsmo maintenance: connections
server connections: connect to server ex2010
Binding to ex2010 ...
Connected to ex2010 using credentials of locally logged on user.
server connections: q
fsmo maintenance: select operation target
select operation target: list roles for connected server
Server "ex2010" knows about 5 roles
Schema - CN=NTDS Settings,CN=EX2010,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=rajcoEX2010,DC=test
Naming Master - CN=NTDS Settings,CN=EX2010,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=rajcoEX2010,DC=test
PDC - CN=NTDS Settings,CN=EX2010,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=rajcoEX2010,DC=test
RID - CN=NTDS Settings,CN=EX2010,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=rajcoEX2010,DC=test
Infrastructure - CN=NTDS Settings,CN=EX2010,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=rajcoEX2010,DC=test
select operation target:

Pre koliko je izvršena migracija?

[ Ignjatije Antiohijski @ 07.03.2012. 13:48 ] @

nemam Exchange instaliram,
ne znam sto bih ovo radio?

Voleo bih neko objasnjenje jer ne razumem bas sta se desava

hvala

[ Ignjatije Antiohijski @ 07.03.2012. 15:03 ] @

[ Ignjatije Antiohijski @ 08.03.2012. 07:38 ] @

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Administrator>ntdsutil
ntdsutil: roles
fsmo maintenance: connections
server connections: connect to server server2008
Binding to server2008 ...
Connected to server2008 using credentials of locally logged on user.
server connections: q
fsmo maintenance: select operation target
select operation target: list roles for connected server
Server "server2008" knows about 5 roles
Schema - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=BREG,DC=local
Naming Master - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
PDC - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Si
tes,CN=Configuration,DC=BREG,DC=local
RID - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Si
tes,CN=Configuration,DC=BREG,DC=local
Infrastructure - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site
-Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
select operation target:

Migracija je izvrsena pre nekih godinu dana.
Da ponovim, ja sam ovde tek 2.mesec, a kolega ne moze tacno da se seti procedure po kojoj je radio, ali kaze da je sve bilo "step-by-step po tutorijalu".
E sad, taj kolega mi je SEF, i od mene ocekuje da ovo resim :).A ja, iskreno, nemam bas iskustva u ovome, sto se i vidi.

Hvala