[ jovanmal @ 15.06.2012. 07:57 ] @
Pozdrav ljudi, evo primjera konfiguracionog fajla za klijente OpenVPN-a: Code: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote 100.103.97.87 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.100.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\Keys\\ca.crt" cert "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\Keys\\test.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\Keys\\test.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 Kao sto vidite, ovdje se moraju navesti putanje do fajlova koji sadrze sertifikate. Da li postoji nacin da se sertifikati sadrze u ovom fajlu (npr. da se navedu kao tekst)? Na ovaj nacin bi distribucija podesavanja za korisnike bila dosta laksa i svela bi se samo na kopiranje .ovpn fajla u folder Config kod klijenta. Hvala |