[ slaki75 @ 07.07.2013. 20:10 ] @
dali neko moze da mi pomogne probao sam admin sifru ali nece sa njom a ne znam drugu sifru a ovaj sto sam uzeo od njega nezna ni on......

radu se o

------geneko wx 1590 wireless access point---


unapred zahvalan
[ Miroslav Cvejić @ 07.07.2013. 20:59 ] @
Resetuj ga na fabrička podešavanja.
[ tox master @ 07.07.2013. 21:03 ] @
Citat:
Reset device
This unit can be reset to factory defaults by reset hole and the procedure can be done with the following steps.
Step1: You can reset the Access Point’s settings to factory defaults by pushing a paperclip in the little hole next to the UTP port while the Access Point is on and do not release it right away.
Step2: Release the reset button when the “ACT” LED from burning to blinking. Normally, it may take 5~10 seconds. After release the reset button, the unit has been reverted to default setting.


Citat:
START UP & LOGIN
In order to configure the WX-1590, you must use your web browser and manually input http://192.168.5.100 into the Address box and press Enter. The Main Page will appear.
In order to configure the WX-1590, you must input the user name and password into the User Name box and the Password box. The default user name and password is “admin”.


Powered by Google
[ igor tomic @ 10.07.2013. 13:27 ] @
Mogao si se malo zabaviti i probiti šifru, mada je kolega naveo jednostavan način. Ali kad se iskomplicira nauci se vise stvari


[Ovu poruku je menjao tox master dana 10.07.2013. u 14:52 GMT+1]