[ gloginja7 @ 17.03.2014. 09:57 ] @
SONY PMW-EX1R FLANGE BACK ADJUST (Podešavanje Back Focus-a) PRIPREMA LCD mora biti u zatvorenom položaju LCD B Prekidač LCD osvetljenja (ispod vrha rukohvata kamere) mora biti u položaju OFF Gain mora biti podešen na H POSTUPAK (Prvi deo): Pritisnite i držite Cancel + Jog točak, onda + Meni Održavanje, RPN i stavke menija informacije će biti dodat na dno Meni ispod ostalih Ovim postupkom otara se servisni (skriveni ili dopunski) meni U ovom meniju nalazi se opcija Auto Adjust FB (koja nam je i potrebna). POSTUPAK (drugi deo): SEIMENS zvezda grafikon ili neki drugi, veličine 8" ili veći je idealan. Treba montirati na zid dovoljno širok da pokrije najveći deo okvira na Z0 (zum nula). Ostali objekti visokog kontrasta u ovoj oblasti mogu uticati na kalibraciju. Montirajte kameru na stativ, oko 3m (10 feet) daleko od Siemens star-a ili drugog visokokontrastnog objekta. Zumirajte na isti tako da Vam centar objekta bude u cetru tražila. Postavite sočivo na auto fokus, fokus prsten mora biti naguran napred, tako da se ne vidi onaj narandžasti prsten na objektivu Auto iris Makro Isključeno Izaberite Auto Adjust FB u meniju i izaberite Select Execute PRIPREMA: LCD must be in the closed position LCD B. Light switch (under top handle) must be in the OFF position Gain must be set to H POSTUPAK: Press and hold Cancel + Jog Wheel, then + Menu Maintenance, RPN and Information Menu items will be added to bottom of Menu below Others Flangeback auto adjustment (also called back focus) is under Maintenance, shown as Auto FB Adjust An 8" or larger Seimens star chart is ideal. Siemens star It should be mounted on a plain wall, wide enough to cover most of the frame at Z0, widest angle Other high contrast objects within this field of view may effect the calibration Mount the camera on a tripod, about 10' away from the high contrast back focus target Zoom all the way in to the target and center it in the viewfinder Set lens to Auto Focus, Focus Ring pushed forward, Auto Iris, Macro Off Select Auto FB Adjust in the Maintenance menu Select Execute Srećno Glo. |