Pokreni YaST mimo KInternet-a. Kao root naravno. Zatim u YaST-u
konfiguriši modem. Ako YaST ne prepoznaje modem moraćeš da ga instaliraš
ručno i za to ćeš naći brojna uputstva ovde na forumu. U istom modulu za
konfigurisanje modema, konfigurišu se i parametri konekcije (broj
telefona provajdera, user name, pass... i sl). Probaj pa ćemo videti šta
kasnije :)

Evo javjlam se preko wvdiala.
Ovo je log file kinterneta:

SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: Removed stale lock on modem (pid 6056)
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: ATZ
pppd[0]: OK
pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: OK
pppd[0]: --> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: --> Modem initialized.
pppd[0]: --> Sending: ATDT042110000
pppd[0]: --> Waiting for carrier.
pppd[0]: ATDT042110000
pppd[0]: CONNECT 115200
pppd[0]: --> Carrier detected. Waiting for prompt.
pppd[0]: CVX Access Switch.
pppd[0]: Access is restricted to authorized users only.
pppd[0]: login:
pppd[0]: --> Looks like a login prompt.
pppd[0]: --> Sending: averoes@lite
pppd[0]: averoes@lite
pppd[0]: password:
pppd[0]: --> Looks like a password prompt.
pppd[0]: --> Sending: (password)
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: --> Hmm... a prompt. Sending "ppp".
pppd[0]: ppp
pppd[0]: 'ppp' is not a valid command.
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: --> Hmm... a prompt. Sending "ppp".
pppd[0]: ppp
pppd[0]: 'ppp' is not a valid command.
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: --> Hmm... a prompt. Sending "ppp".
pppd[0]: ppp
pppd[0]: 'ppp' is not a valid command.
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: --> Don't know what to do! Starting pppd and hoping for the best.
pppd[0]: Serial connection established.
pppd[0]: using channel 2
pppd[0]: Using interface ppp0
Status is: connecting
pppd[0]: Connect: ppp0 <--> /dev/modem
pppd[0]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9b84b1f> <pcomp> <accomp>]
pppd[0]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9b84b1f> <pcomp> <accomp>]
pppd[0]: sent [LCP ConfNak id=0x1 <magic 0x217ff25b>]
pppd[0]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9b84b1f> <pcomp> <accomp>]
pppd[0]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9b84b1f> <pcomp> <accomp>]
pppd[0]: sent [LCP ConfNak id=0x1 <magic 0x847c4af0>]
pppd[0]: rcvd [LCP ConfNak id=0x1 <magic 0x847c4af0>]
pppd[0]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x8e62f457> <pcomp> <accomp>]
pppd[0]: rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x8e62f457> <pcomp> <accomp>]
pppd[0]: sent [LCP ConfNak id=0x2 <magic 0x761ff763>]
pppd[0]: rcvd [LCP ConfNak id=0x2 <magic 0x761ff763>]
pppd[0]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x6e09e379> <pcomp> <accomp>]
pppd[0]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x6e09e379> <pcomp> <accomp>]
pppd[0]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x6e09e379> <pcomp> <accomp>]

Pokušaj da u /etc/wvdial.conf fajlu staviš opciju:
Stupid Mode = 1

Probaj i da se konektuješ na nekog drugog provajdera. Izgleda da se provajder ne razume baš najbolje sa tvojim pppd-om koji je zadužen za komunikaciju.

Pozdrav!
Da, to je re�ilo problem.Sa YAST-om sam konfigurisao nalog i uklju�io
Stupid Mode!
Hvala ti puno na pomo�i!

--
Best regards,
slavko mailto:[email protected]