[ DeepInBrain @ 10.09.2004. 00:31 ] @
| Sa_Neta... Pin Description: 1 Earth Ground 14 Secondary TXD 2 TXD - Transmitted Data 15 Transmit Clock 3 RXD - Received Data 16 Secondary RXD 4 RTS - Request To Send 17 Receiver Clock 5 CTS - Clear To Send 18 Unassigned 6 DSR - Data Set Ready 19 Secondary RTS 7 GND - Logic Ground 20 DTR - Data Terminal Ready 8 DCD - Data Carrier Detect 21 Signal Quality Detect 9 Reserved 22 Ring Detect 10 Reserved 23 Data Rate Select 11 Unassigned 24 Transmit Clock 12 Secondary DCD 25 Unassigned 13 Secondary CTS npr. Hteo sam samo da upalim LED na LPT1, "gurnem" ih i da se pale u zavisnosti od variable koju saljem na port. Radio sam to nekad, ali na asembleru, ali sad za C (Windows). E sad, pitanje: - U koje pinove da ih ubacim? - Moze li neko da mi da jednostavan kod za otvaranje, slanje podataka, zatvaranje ovog porta na C-u? |